Two new types of the Blend A series have been released.

A machine hatch for large machinery entry and exit that also serves as a regular door.

It is a dual-purpose machine hatch for the entry and exit of large machinery and a regular door. When bringing in or taking out large machines or equipment, removing the ramp panel allows for the necessary opening for entry and exit. An opening of a certain height is required for the entry and exit of tall machines. However, since it is usually used as an entrance for people and carts, a very large door is not necessary. Additionally, if it is to be used in a clean room, having a door that is too large can cause significant airflow changes when opening and closing, which is also a problem. In such cases, the DTV40 with a detachable machine hatch at the top of the swinging door is convenient. This door combines the advantages of the swinging door DR40 and the detachable machine hatch TH40, making it a truly "handy" door unique to Sanwaise.

• Sliding door
• Phenol Foam
• Insulation work

A convenient combination of detachable machine hatches and swinging doors.

The detachable machine hatch is used for large openings that are only utilized a few times a year or once every few years, but it is a convenient blend door when, due to the room layout, there is no choice but to place a door for people to enter and exit in that specific location, or when there is a desire to install a door for that purpose. Structurally, a hinged door is attached to either end. The hinged door can be removed from the hinges if opened more than 90°, allowing it to be positioned as a machine hatch when considering the opening dimensions, thus ensuring a large opening.

• Sliding door
• Phenol Foam
• Insulation work

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.