The inaugural ceremony was held.

Industry top share!! "Takaya, the PCB inspection equipment trusted and supported by the world."

The "electronic circuit board" is one of the important components widely used in various fields as a fundamental part for controlling electronic devices. The "board inspection equipment" developed by the industrial equipment division is an "in-circuit tester" designed to inspect whether all components function correctly and whether there are any mounting defects after various electronic components have been mounted on this "electronic circuit board" (ICT: In-Circuit Test). Among these, the "flying probe tester," which uses a needle called a "probe" that is rapidly moved by a robotic arm to directly contact the electronic components on the board for inspection, is a flagship product developed by Takaya ahead of the world. This device enables the rapid detection of various defects that occur during manufacturing. Additionally, it allows for quick adaptation to a wide range of boards through program changes. It has established an indispensable and solid position in modern manufacturing, which focuses on small-batch production of diverse products.

• Measurement and Inspection

RFID technology enhances the value of diverse business models even further. It is active across a wide range of industrial fields, from security to factory automation and logistics.

The core business of the RF Division is the development, manufacturing, and sales of products using radio frequency. Since 1996, we have developed radio wave-based store security gates, 2.45GHz RFID readers/writers, 13.56MHz RFID readers/writers, and various application system products, with Takaya products actively utilized across a wide range of industrial fields from security to factory automation and logistics. We not only offer our own planned products but also provide OEM/ODM supply, contract development, EMS services, and system solutions, contributing to the creation of added value in diverse business models.

• RFID/IC tags

Providing custom security solutions for various industries and operations. One-stop support from infrastructure assistance to software development.

The core business of the Solutions Division is IT services for enterprises. By effectively utilizing the experience, know-how, and human resources that the Takaya Group has cultivated through various system developments, along with the latest IT technologies, we provide optimal solutions to the IT challenges faced by our customers. For example, our highly skilled system engineers address diverse customer needs with systems such as RFID process management systems, attendance management systems, access control systems, warehouse management systems, and parts management systems. Utilizing advanced research, analysis, and design capabilities, we propose and build optimal systems ranging from infrastructure support such as server implementation and network construction to software development, maintenance, and operation, providing one-stop IT solutions.

• IT Control and Services

Supporting cutting-edge technology in the digital network era, we meet industry-specific needs with "high quality," "short delivery times," and "low costs."

The advancements in technology in the field of communication imaging are relentless. The new digital network market is rapidly expanding, and there is a demand for technological capabilities and production systems that can supply cutting-edge products in a timely manner. In response to the needs of this era and the industry, the EMS (Electronics Manufacturing Service) Business Division designs and manufactures products commissioned by customers. We cater to a wide range of needs, from simple assembly-type EMS through component supply to integrated EMS that encompasses all processes from development and design to final product production, as well as from small-lot production of various types to mass production of small models. By bringing together the "wisdom," "skills," and "experience" of Takaya's engineers and flexibly combining them, we provide EMS solutions that address various challenges.

• others

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK