Notice of Article Publication in the December Issue of Monthly Waste Management

You can easily tell if the liquid in the drum is full or empty with just one touch!

"Sensor Type Liquid Level Gauge for 200L Drum" GDB-CF / For Full GDB-CL / For Empty (For low viscosity oil, kerosene, diesel, wastewater, and waste liquid) *Not suitable for solvents or chemicals that can damage materials "Advantages" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low viscosity oil, kerosene, diesel, water, wastewater, and waste liquid. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other measuring instruments

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

"Sensor Type Liquid Level Gauge for 200L Drum" GDA-HH / For Full (Oil, Kerosene, Diesel) *Not suitable for solvents or chemicals that may damage the material GDA-HL / For Empty (Oil, Kerosene, Diesel) *Not suitable for solvents or chemicals that may damage the material "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside with each product. ● You can confirm that the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids are low-viscosity oil, kerosene, and diesel. *Not suitable for solvents or chemicals that may damage the material. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Since it is air-driven, the liquid level gauge can be used in fire hazard areas. ● Can be used in combination with air-driven handheld pumps (ACH, AMVH, AMH1 series). ● After the pump stops, only the GDA-HL can discharge additionally. The pump operates while pulling the quick discharge ring. ● This product is for indoor use only. *Do not use outdoors.

• Other measuring instruments

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on a liquid crystal panel. With a wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Normal Type/Wireless Type/Main Unit (GDE-CL/GDE-CLW/GDE-W) GDE-CL / Normal Type - No Wireless - Battery Operated GDE-CLW / Wireless Type - AC100V GDE-W / Wireless Type Dedicated Main Unit - AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser detection considerations. Features: ● Measurement with various containers such as drums (display in %・L・mm) Can also be used with other containers if the maximum liquid height is set (display in %・mm possible / L display not possible) * % indicates the liquid remaining ratio from the total, L (liters) indicates the remaining liquid amount, mm indicates the remaining height from the bottom layer relative to the total liquid * Compatible with drum small plugs (G3/4) ● Select units from "%・L・mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound is emitted during "%” measurement ● The built-in laser at the bottom detects liquid non-contact ● Manage in real-time with a PC dedicated app ● Sends liquid volume data to the USB-connected main unit every 30 seconds ● Manage up to 15 units within the PC dedicated app.

• IoT

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

Kort Valuta Inc. (Head Office: Shibuya, Tokyo; CEO: Hideki Shibata, hereinafter “the Company”) provides TwooCa, a next-generation wallet that combines employee/member benefit features such as point rewards with digital payments and digital money utilization. We are pleased to announce the official release of TwooCa Mall, a closed online mall exclusively available to employees and members of companies that have implemented TwooCa. In conjunction with the official launch, we have also released a dedicated landing page that consolidates information for prospective partner merchants. This page clearly outlines the benefits and features for companies considering joining the TwooCa Mall platform. Press Release: https://prtimes.jp/main/html/rd/p/000000082.000076589.html

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.