Chemical Industry Daily News, October 30, 2024 Issue, Advertisement Announcement

Pursuing reasonable prices. For the transportation of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) CHD-20HPP (for solvents) CHD-20HPPV (for solvents / with ball valve) CHD-20HPPN (for solvents / with gun nozzle) CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for safety and security

• pump

A chemical pump designed to pursue reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in areas where open flames are prohibited.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe dispensing of flammable liquids ● Motor part can be replaced 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, so no risk of electric leakage ● Air motor type with high discharge volume, non-pulsating ● Dedicated for discharge PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for peace of mind and safety

• pump

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for the transfer of solvents in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drum (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. It is also used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air model (CHD1-20ASUS-N). **Can be used in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, home appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• pump

You can easily tell if the liquid in the drum is full or empty with just one touch!

"Sensor Type Liquid Level Gauge for 200L Drum" GDB-CF / For Full GDB-CL / For Empty (For low viscosity oil, kerosene, diesel, wastewater, and waste liquid) *Not suitable for solvents or chemicals that can damage materials "Advantages" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low viscosity oil, kerosene, diesel, water, wastewater, and waste liquid. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other measuring instruments

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

"Sensor Type Liquid Level Gauge for 200L Drum" GDA-HH / For Full (Oil, Kerosene, Diesel) *Not suitable for solvents or chemicals that may damage the material GDA-HL / For Empty (Oil, Kerosene, Diesel) *Not suitable for solvents or chemicals that may damage the material "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside with each product. ● You can confirm that the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids are low-viscosity oil, kerosene, and diesel. *Not suitable for solvents or chemicals that may damage the material. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Since it is air-driven, the liquid level gauge can be used in fire hazard areas. ● Can be used in combination with air-driven handheld pumps (ACH, AMVH, AMH1 series). ● After the pump stops, only the GDA-HL can discharge additionally. The pump operates while pulling the quick discharge ring. ● This product is for indoor use only. *Do not use outdoors.

• Other measuring instruments

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on a liquid crystal panel. With a wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Normal Type/Wireless Type/Main Unit (GDE-CL/GDE-CLW/GDE-W) GDE-CL / Normal Type - No Wireless - Battery Operated GDE-CLW / Wireless Type - AC100V GDE-W / Wireless Type Dedicated Main Unit - AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser detection considerations. Features: ● Measurement with various containers such as drums (display in %・L・mm) Can also be used with other containers if the maximum liquid height is set (display in %・mm possible / L display not possible) * % indicates the liquid remaining ratio from the total, L (liters) indicates the remaining liquid amount, mm indicates the remaining height from the bottom layer relative to the total liquid * Compatible with drum small plugs (G3/4) ● Select units from "%・L・mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound is emitted during "%” measurement ● The built-in laser at the bottom detects liquid non-contact ● Manage in real-time with a PC dedicated app ● Sends liquid volume data to the USB-connected main unit every 30 seconds ● Manage up to 15 units within the PC dedicated app.

• IoT

Acima Corporation has updated its corporate translation and multilingual language service offerings. Since our founding in 2007, we have supported more than 400 companies and organizations across over 2,400 projects. Through our network of more than 1,200 language professionals and subject-matter specialists, we provide services in more than 65 languages. We specialize in corporate translation across a wide range of fields, including contracts and internal policies, IT and software, technical documentation, investor relations and financial materials, website localization, marketing content, video, and subtitles. For each project, we select professionals with the appropriate subject-matter expertise and provide end-to-end support, including terminology management, quality control, and ongoing multilingual project management. Companies considering professional translation services are invited to learn more about our Corporate Translation & Multilingual Services.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.