[Information] Basic knowledge on the storage and preservation of waste liquids in laboratories and similar environments is being made available.

We support a series of tasks from listing and classifying the items to be disposed of, to sorting and packaging.

Are you having trouble with things like this? ☑ I want to dispose of leftover chemicals and cleaning waste used in experiments. ☑ I want to dispose of chemicals and reagents that are generated regularly. ☑ I want to dispose of expired chemicals all at once. It is said that there are tens of thousands of chemical substances commercially produced and distributed in the country. Among them, some have physical and chemical hazards as well as health and environmental harmfulness, requiring proper handling and disposal. We also handle the disposal of chemicals and waste liquids that have special properties such as danger or harmfulness, even in small quantities.

• others

We will assist in maintaining the performance of equipment using pharmaceuticals and wastewater treatment facilities through cleaning operations and other support.

Are you having trouble with things like this? ☑ I want to clean and maintain wastewater treatment facilities and underground pits. ☑ I want to clean scrubber tanks during regular maintenance of local exhaust systems. ☑ I want to clean tanks that have stored non-aqueous substances. Even with constant monitoring and measurement, if issues with wastewater treatment tanks or scrubber tanks are addressed only after it is discovered that they are not performing as needed, it may already be too late, and some negative effects (such as violations of sewage standards or worker exposure) may have already occurred. To maintain performance from a safety perspective, regular cleaning is essential for peace of mind.

• others

We will support the person in charge of facility relocation and related matters in terms of removal and disposal.

Are you facing any of these issues? ☑ You are planning to relocate a facility or factory, but a large amount of leftover chemicals has accumulated. ☑ Chemicals remain in chemical plants or tanks scheduled for dismantling or removal. ☑ The concentration is high, and you cannot perform the cleaning work yourself. Relocating facilities or dismantling/removing equipment with leftover chemicals can lead to serious accidents. By providing comprehensive support from preliminary surveys to execution, we can ensure compliance with acceptance conditions at waste disposal facilities and ensure safety during transportation, alleviating the concerns and risks faced by our customers.

• others

As a specialized company in chemical waste treatment, we offer a variety of support services.

Are you struggling with issues like these? ☑ You can't decide how to mix, store, or label waste liquids. ☑ Chemicals without labels left behind by former employees have surfaced. ☑ Organizing the waste storage area takes up an entire day's work. We will provide various individual proposals for the concerns and issues specific to each site.

• others

We propose appropriate processing and recycling options based on the content of waste, as well as risk diversification, through our network of processing companies across the country.

Aren't you troubled by things like this? ☑ There are no local contractors for proper disposal and recycling. ☑ I want to contract with a disposal site located far away to diversify risk. ☑ The amount of waste is small, and I was turned away by recycling facilities. We can handle a wide variety of waste, from plastic bulky waste such as furniture and equipment to industrial waste liquids and used oils.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI