Added multi-layer film coating to 'infrared transparent resin (Toyo Gosei: Alonix sheet)' to the artisan coating.

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I want to block other wavelengths of light as they become noise, so I would like to widen the stop band. - Since there is a range of incident angles, can this be taken into account? - The shape is special, but can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Security cameras and surveillance systems
• Distance measuring device/length measuring device
• Automated guided vehicles (AGV, RGV)

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only allow transmission at specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can it be coated? - Since light other than the desired wavelength will cause noise, I would like to widen the blocking range. - Considering the range of incident angles, can this be taken into account? - Is it possible to mount it on AGVs or OHTs? The 905nm bandpass filter is a bandpass filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our achievements in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Security cameras and surveillance systems
• Distance measuring device/length measuring device
• Automated guided vehicles (AGV, RGV)

This is a standard stock of optical thin films such as anti-reflective films, bandpass filters (BPF filters), and IR cut filters (infrared cut filters).

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such voices! ◆ It's difficult to bear the cost of one batch when I only need a few for experiments... ◆ I want to see product development and performance testing quickly, so I would like to have a few samples... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• Security cameras and surveillance systems
• Floodlight
• Automated guided vehicles (AGV, RGV)

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing such issues? ■ Is it possible to transmit visible light and part of the infrared wavelength (850nm)? ■ I want to ensure that the blocking range that causes noise is definitely cut off. ■ Since there is a range of incident angles, can this be taken into account? ■ The shape is special; can it be shipped as a component? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. In addition to standard IR cut, it has the function of selectively transmitting only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring both during the day and at night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Security cameras and surveillance systems
• Floodlight
• Automated guided vehicles (AGV, RGV)

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, water, and chemicals) This common understanding can be overturned with our company's technology. 1) Excellent infrared transmission characteristics This is a filter that transmits infrared light through the formation of a multilayer film and its interference effect. It achieves excellent transmission rates from the near-infrared to far-infrared regions. 2) Custom design and customization for desired wavelength ranges We can design and deposit films tailored to the wavelength range requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: We own FT-IR Rest assured that we will always attach a measurement chart (spectral characteristics) upon shipment. 4) Component support is also possible We can not only procure substrates and deposit films but also cut them into any shape and ship them as components. However, we will need detailed drawings. 5) Cleanroom compliance Our working environment maintains the necessary cleanliness levels from film deposition to inspection, and we have a robust system in place to address minor film defects (such as foreign particles in the film).

• Security cameras and surveillance systems
• Structural Survey
• Automated guided vehicles (AGV, RGV)

We have newly added the "RB Catcher," a log capture device installed on impermeable sediment control dams in flow sections, to our product lineup and have started sales. The RB Catcher is directly attached to the upstream part of the impermeable sediment control dam to enhance log capture functionality. Unlike the conventional straight arrangement, it features a structural layout that creates gaps between units, ensuring that water flow is maintained without causing blockages after capturing logs. This allows for the reliable capture of subsequent logs without overflow, preventing damage downstream. By adding this new log capture device to our lineup, we will flexibly respond to various needs in the field.

We have introduced Majesta Fragrance to a luxury lounge establishment located in the Kitashinchi area of Osaka. This time, we have adopted "Majesta Fragrance" as part of the in-store space branding. The moment you open the door, you are enveloped in a delicate and sophisticated scent, as if wrapped in high-quality silk. The elegant atmosphere reminiscent of a luxury hotel lounge invites customers into an extraordinary world. Majesta Fragrance has been implemented as an invisible scent branding in many establishments and companies. For scent production in the Kansai area, please leave it to Majesta Fragrance. If you are interested in scent production, please feel free to contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.