[New Product] Sun Tile X Top Clear AUV

This one product can handle various roofing materials!! A satisfying item!

- It has a high reinforcing effect for balanced impregnation/wetting/membrane formation on the substrate, demonstrating strong adhesion even to fragile or difficult-to-adhere materials. - It can be used not only for conventional cement tiles and Western-style concrete tiles but also for roofing materials such as decorative slate for residential use, polymer fiber-reinforced cement tiles, and ceramic tiles, as well as for repainting various old coatings. (Excludes Japanese tiles) - Due to its excellent adhesion and film-forming properties, it is possible to reduce the intermediate coating process for Western-style concrete tile painting specifications. *The conventional intermediate coating process can also be applied as a high appearance specification.* - It is easy to handle as a one-component product and has good workability due to its low tendency to run. Additionally, because it is a weak solvent, it is suitable for repainting old coatings.

• Exterior coating materials

Special paint for roof repainting - Compatible with various roofing materials! A product you can trust!

Quality you can trust and be assured of, loved for 25 years! Our Sun Tile series has been used by numerous customers since its launch in 1997. We have a proven track record of painting various roofing materials, including cement tiles and Western-style concrete tiles. This time, we would like to introduce a recommended product from the Sun Tile series. 【Sun Tile X One Sealer】 - A versatile primer (sealer) paint that can be applied to various roofing materials. It can be used not only on traditional cement tiles and Western-style concrete tiles but also on residential decorative slates, polymer fiber reinforced cement tiles, ceramic tiles, and for repainting various old coatings. (Excludes Japanese tiles and iridescent tiles) - It has a high reinforcing effect due to its balanced penetration/wetting/membrane formation on the substrate, providing strong adhesion even to fragile or difficult-to-adhere materials. - Being a one-component type, it is easy to handle and has good workability due to its low run-off. Additionally, as it is a weak solvent, it can also be used for repainting various old coatings.

• Exterior coating materials

A long-selling product for roof repainting that continues to evolve since its release in 1997.

- The foundation effect smooths out unevenness, improving the finish of the topcoat. - Being cationic, it has high adhesion to the old paint film. - Prevents algae and mold in the primer layer with the undercoat.

• Exterior coating materials

A long-selling product for roof repainting that has continued to evolve since its release in 1997.

- A silicone-modified high weather-resistant paint with outstanding durability that preserves beauty. - A completely new value created with a rich texture and beautiful luster. - Suitable for repainting with low solvent, and can be applied to residential decorative slate roofs with the right primer selection.

• Exterior coating materials

"Two-component weak solvent silicone modified resin high weather-resistant clear" Choice for clear coating on roofs This one step will protect the future of your roof.

Performance Features A new product has been launched in the Sun Tile series! ~Triple X Coating System~ X One Sealer + X Top + X Top Clear AUV *This clear is specifically for X Top. (Not for use with S Top or A Top) 1. High Weather Resistance The Triple X Coating System achieves high durability comparable to fluorine paint, with excellent gloss retention thanks to its robust multi-layer cross-linked film structure and AUV (UV resistance) effect, even though it is a silicone resin. Compared to our conventional coating specifications, the gloss lasts about 1.5 times longer and prevents fading over the long term. 2. Applicable Roofing Materials It is widely compatible with ceramic roofing materials. *After performing the specified substrate treatment, apply the primer. Residential decorative slate, cement tiles (thick slate), Western-style concrete tiles (dry concrete tiles), ceramic tiles. 3. Product System By offering a single clear product that utilizes existing items without a full lineup of fluorine resin paints, we can meet high weather resistance grades (fluorine paint class), which helps reduce excess inventory for retailers and contractors.

• Exterior coating materials

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.