November 1 (Friday) 10:00 AM - 11:00 AM Announcement of the 6th webinar. "What are the key factors in adopting solar power and battery storage systems?" Registration is now open.

Switching unnecessary (always powered type) for 'always and in case free' - towards a phase-free environment for 'disaster preparedness without preparation' OFGSⓇH series.

The OFGS® (OFF GRID SWITCH BOX) series from Tsuruta Electric is a switchboard/transmission system that integrates a transformer with control and protection, developed to maximize the use of solar battery storage both during normal operation and during power outages. The OFGS®-H series is a constant power supply system designed for hybrid battery systems. Even during power outages or restoration, it allows for seamless power supply and autonomous operation without the need for manual intervention, thanks to the automatic switching mechanism of the dedicated transformer. This system fully utilizes the capabilities of hybrid PCS without the need to switch between grid and off-grid modes, addressing challenges related to installation conditions for corporate renewable energy initiatives such as BCP measures, phase-free operations, and RE100. It enables the construction of a battery storage system that provides clean energy from natural sources (solar power) and off-grid (independent of the power grid) without distinction between normal and emergency situations. By packaging "three-phase transformers" + "Scott transformers (for specific single-phase loads)" + "protection devices" + "control devices" into an 'all-in-one package,' installation and construction time can be significantly reduced.

• Power and Energy Equipment

Space-saving design solar power generation system PPSC® series + SUNGROW PCS with integrated transformer and protection device on a PCS mounting platform.

The PPSCⓇ series of full self-consumption solar power generation systems now includes the RS series (backpack type) integrated with the power conditioner, enabling one-stop installation of the power conditioner, transformer, and protective devices. With transformer technology specifically designed for solar power applications, along with lightning surge protection and leakage current prevention features, it allows for 100% utilization of solar energy, enabling highly efficient energy generation with low standby power consumption. = Advantages of adopting the RS series = ■ Space-saving with PPSCⓇ series + power conditioner ■ Significant reduction in time previously spent on separate installation and construction of power conditioners, transformers, and protective devices. ■ No need for wall drilling work ■ Elimination of installation and logistics costs, as well as time loss in construction periods ■ Reduction in logistics costs due to decentralization ■ Voltage conversion ■ Leakage current prevention (prevents unnecessary operation of the permanent magnet on the cubicle side) ■ Lightning surge protection feature ■ High efficiency and low standby power ■ Specification of core materials (amorphous and electromagnetic steel sheets) is possible ■ Heavy salt damage resistance (optional)

• Solar power generation equipment

Full self-consumption type solar power generation system PPSCⓇ master unit. Transformer for solar power generation. Compliant with salt damage and fire prevention regulations, 50℃ ambient temperature, 20-year warranty.

The PPSCⓇ series master unit is a solar power generation system that efficiently utilizes solar energy without waste. It is a transformer integrated with a control box specifically designed for solar power generation. It is focused on self-consumption of solar power, enhancing the efficiency of solar power generation, preventing reverse flow, and providing real-time tracking control. Additionally, it completely isolates the power converter from the grid and power (Safety I0Ⓡ) to protect the equipment. Product Features: ■ Real-time tracking control ■ Leakage current prevention function through unique design of the isolation transformer ■ Reverse flow prevention function ■ Voltage conversion ■ Lightning surge protection function ■ High efficiency and low standby power ■ Distributed transformer ■ Simplification of installation work through the integration of transformer, protection devices, and control devices ■ On-site survey and estimation ■ Contracting for renovation work of existing cubicles

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

Full self-consumption type solar power generation system PPSCⓇ slave unit. Transformer for solar power generation. Compliant with salt damage and fire prevention regulations, 50°C ambient temperature, 20-year warranty.

The PPSCⓇ series slave device, a solar power generation system that efficiently utilizes solar energy, is a transformer for solar power generation. Specialized for self-consumption of solar power, it is designed to enhance the efficiency of solar power generation, prevent reverse flow, provide real-time tracking control, and completely isolate the power converter from the grid and power (Safety I0Ⓡ) to protect the equipment. Product Features: ■ Real-time tracking control ■ Leakage current prevention function through unique design of the isolation transformer ■ Reverse flow prevention function ■ Voltage conversion ■ Lightning surge protection function ■ High efficiency and low standby power ■ Distributed transformer ■ Simplification of installation work through integration of transformer, protection devices, and control devices ■ On-site survey estimates ■ Contracting for renovation work of existing cubicles Please feel free to consult us regarding the system introduction flow, benefits of introduction, or any questions about installation work.

• Solar power generation equipment

Conversion efficiency of over 95%! With a high-efficiency design that directly charges and discharges direct current, and a simple design that only charges with solar power, it can be connected to all PCS within the target voltage range.

■ DC-Link 48kWh / B-Innovation Co., Ltd. ■ The benefits of introducing a storage battery are clearly evident when comparing consumption power vs. generation power in a graph. Especially during the solar season from May to October, solar power generation + storage battery = significant reduction in electricity costs with stored electricity. ■ Easy introduction and clear explanation of introduction benefits ■ You can clearly understand the differences in the operation of solar power generation before and after the introduction of the storage battery, realizing "So that's how it is!" Please feel free to contact us! 01 | A simple design that only charges from solar power generation. 02 | Can be connected to all PCS within the voltage range (DC 439.5 to 532.5V). *1 03 | Capable of outputting both single-phase and three-phase. 04 | Does not control the storage battery; achieves self-consumption by utilizing output control from the power conditioner. 05 | Direct charging and discharging of direct current for high efficiency. Conversion efficiency of over 95%. 06 | Can be retrofitted and installed into existing self-consumption systems. (Refer to configuration example: connected between the power conditioner and solar panels) *1 Please feel free to contact us regarding compatible PCS manufacturers.

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html