[Notice] Regarding the price revision of Air Scoops

Instantly crush soil and sand with high-speed air! It is possible to excavate soil and sand without damaging the target object!

The Air Schop is a device that uses compressed air ejected from a special nozzle to excavate (loosen) hardened soil and debris. It can spray air at high speed from the tip, instantly crushing the debris, allowing for excavation without damaging the target object. 【For the safety of the operator (soil and debris may scatter during operation.)】 ■ During operation, please ensure to wear earplugs and goggles, as well as protective gear for your body. * For facial protection, please wear thick canvas or leather gloves, an apron, or equivalent gear to protect against scattering. ■ You must have basic knowledge of the safe use of air compressors. ■ When connecting compressed air, never point the Air Schop's outlet at a person, look into it, or allow anyone to look into it. (This can cause injury.) ■ Proper use will have no impact on the environment. * For more details, please request materials or view the PDF data available for download.

• Earthworks
• Pile and foundation work
• Drilling Machine

High-speed air conveyor that does not require a vacuum tank, etc.

The powerful air conveyor, the ejector, is a suction device (pump) that operates as a high-speed air conveyor without the need for a vacuum tank or similar equipment. [Additional Explanation] ◆ The recommended type of ejector varies depending on the type and condition of the material being conveyed. When considering a purchase, please inform us of your requirements using the "Quotation Request Form" in the catalog to avoid any issues. ◆ Due to significant fluctuations in the prices of materials used (such as stainless steel), please request a quote each time. ◆ The number following "JT" generally indicates the diameter of the suction side. (There may be slight discrepancies between the model number and actual size due to differences in size expressions like inches.) ◆ As a guideline for selecting a model, choosing one where the conveyed material is about half to one-third of the diameter can be a good reference. ◆ The ejector is not well-suited for conveying highly viscous materials. ◆ It is not effective for conveying materials that solidify upon gripping, but it can convey such materials if they are mixed with more fluid ones. (Note: Materials with a shake-level viscosity can be conveyed, but mortar solidifies inside and is difficult to clean, so it is not recommended.) Further explanations are available in the basic information section.

• Earth retaining wall/foundation reinforcement
• Earthworks
• Pile and foundation work

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI