I have added 'Explanation of aluminum enhanced reflective film!' to the technical trend keywords.

It is possible to efficiently transmit light while removing wavelengths that contribute to heat from the light source. It is ideal for medical lighting devices (such as dental mirrors).

【1】Are you facing any of these issues? ◆ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ◆ The device itself is getting hot, and I want to do something about it. ◆ Is it possible to reflect visible light while allowing near-infrared (NIR) to pass through? ◆ Can the wavelength range of the mirror be customized? 【2】What is a cold mirror? A cold mirror is a filter that transmits near-infrared light while reflecting visible light. By forming a dielectric multilayer film, it can efficiently transmit thermal rays without absorption, removing the wavelengths that contribute to heat contained in the light source. Additionally, due to the excellent heat resistance and weather resistance of the dielectric multilayer film, it plays a role in stabilizing products that incorporate the filter. Typical applications include LCD projectors and medical lighting equipment, particularly dental mirrors that you may have seen on dental treatment chairs. It has the performance of a mirror while featuring a special coating that allows near-infrared wavelengths to pass through to prevent temperature rise in the irradiated area.

• Other lighting fixtures

We propose a highly experienced half mirror. It is a functional half mirror that can arbitrarily split light into reflected and transmitted rays.

【1】Are you facing any of these issues? ◆ Can you change the degree of transmittance and reflectance? ◆ Since the appearance changes depending on the angle, can we come up with a solution? ◆ Is it possible to design and film even with dielectrics? ◆ Given that there is a range of incident angles, can we take that into account? ◆ The shape is special, but can it be shipped as a component? 【2】Features of the Adachi New Industry Half Mirror It is a functional half mirror that can arbitrarily split light into reflected and transmitted beams. By forming a multilayer dielectric film, it achieves extremely low absorption and minimal light loss, allowing for high-efficiency light splitting compared to using metallic films. This product has a proven track record of being used in various devices, including FA sensors.

• Security Sensor Systems
• Security cameras and surveillance systems

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As a coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• Other lighting fixtures
• Showcase

We offer mirrors that combine reflective performance and cost-effectiveness. The main feature is that they have low dependence on the angle of incidence.

Aren't you troubled by things like this? - Can't you create a mirror that is not dependent on the angle of incidence? - I'm looking for a low-cost mirror, anyway. - I'm concerned about the reflectivity of just aluminum; is it possible to increase the reflectivity? - Is it possible to have a coating that is resistant to scratches and other damage? - The shape is special, but can it be shipped as a part? The mirrors manufactured by Adachi New Industry Co., Ltd. are characterized by their low dependence on the angle of incidence.

• Other lighting fixtures
• Scanner
• Automated guided vehicles (AGV, RGV)

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK