Added a 'near-infrared bandpass filter wavelength: 940nm' to the expert coating.

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only allow transmission at specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can it be coated? - Since light other than the desired wavelength will cause noise, I would like to widen the blocking range. - Considering the range of incident angles, can this be taken into account? - Is it possible to mount it on AGVs or OHTs? The 905nm bandpass filter is a bandpass filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our achievements in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Security cameras and surveillance systems
• Distance measuring device/length measuring device
• Automated guided vehicles (AGV, RGV)

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing such issues? ■ Is it possible to transmit visible light and part of the infrared wavelength (850nm)? ■ I want to ensure that the blocking range that causes noise is definitely cut off. ■ Since there is a range of incident angles, can this be taken into account? ■ The shape is special; can it be shipped as a component? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. In addition to standard IR cut, it has the function of selectively transmitting only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring both during the day and at night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Security cameras and surveillance systems
• Floodlight
• Automated guided vehicles (AGV, RGV)

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovation through optical thin films and precision processing technologies.

Adachi New Industry does not simply perform film formation. We aim to be a company that can provide comprehensive proposals, from thin film design to the film formation process and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or light-receiving elements? - If characteristics change with angle, can simulations be conducted? - I would like to see product characteristics with a small quantity of prototypes first. - After mass production begins, can you provide efficient proposals? - Can you measure filters with unknown optical properties? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film formation on various substrates ■ Comprehensive coverage as a product ■ Capable of small quantity prototypes (individual item support available) * For more details, please refer to the catalog or feel free to contact us.

• Security cameras and surveillance systems
• Bulb Type
• Automated guided vehicles (AGV, RGV)

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK