【October 10 (Thursday) to October 11 (Friday), 2024】Notice of participation in "Thermal Technology 2024"

All sampling equipment is built-in, completing oxygen measurement with just one device!

■ Ideal for spot checks ■ Simple operability ■ Choose from PPM model or % model ■ For measuring atmosphere in furnaces ■ For measuring atmosphere in tanks This product is an all-in-one portable oxygen meter equipped with necessary sampling equipment for oxygen measurement. It includes a filter, pump, needle valve (built into the oxygen meter), flow meter (built into the oxygen meter), a ball valve for sealing the oxygen sensor, and a bypass line. This allows for complete oxygen measurement in general environments. Additionally, for applications with a lot of dust, an external pre-filter is available as an option. The oxygen concentration meter is equipped with the AMI galvanic battery-operated oxygen meters 2001LC (for ppm measurement) or 201LC (for % measurement), which are well-regarded for measuring oxygen in furnaces. For more details, please download the catalog.

• Other measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ Option to choose whether or not to include a TFT display* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter equipped in TKZH002 utilizes a polymer sensor that employs thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter designed for high humidity and harsh environments. It is a moisture meter with low aging changes, high performance, and fast response. Since it provides continuous online measurement, it will notify you via an alarm to address moisture and the timing for oil replacement before moisture contaminates the oil and affects insulation properties.

• Other analytical equipment

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Other measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -60 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only MBW973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measuring instruments

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room No. 12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities prepared. We look forward to welcoming everyone!

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools