Notice of the Garden Renovation Exhibition at Yume Messe

An original gate made to order with high seismic resistance using a steel frame structure and wooden structure.

"FIT GATE" is an original gate made to order, featuring a steel frame structure combined with a wooden structure for high seismic resistance. [About the Design] There are no fixed sizes or shapes for FIT GATE. We can create large gates that integrate a passage gate and a shutter gate, as well as gates tailored to the shape of the site. It is also possible to incorporate uneven surfaces, slit processing, curves, and embedded decorative items. [About Installation] The gate is completed up to the waterproof base in the factory and shipped directly to the site, where finishing work is done on the same day. For large gates, they are manufactured in sections and assembled on-site. Installation takes a few hours to about a day to complete. After the frame is installed, the contractor will finish the wall materials and electrical work, completing the gate. This contributes to reducing the workload on-site and shortening the construction period. *For more details, please refer to the PDF materials or feel free to contact us.

• Reinforcement and repair materials

A modern Japanese-style roof gate that is widely used as an entrance gate for apartments and accommodation facilities.

The "FIT Entrance Gate" is a modern Japanese-style roof gate that combines the gabled and hipped roofs of the authentic Japanese-style gate "Sukiya-mon" with the seismic-resistant original gate "FIT GATE." It is widely adopted for entrance gates of commercial facilities, including apartments and accommodation facilities. The waterproof base is applied within the factory, and it is delivered directly to the site as a single unit or in a split structure. The split structure is connected during installation. The installation time is short, ranging from a few hours to one day. This not only maintains quality but also reduces the workload on-site and shortens the construction period. **Features of the FIT Entrance Gate:** - A Japanese-style gate that fits modern architecture - The image changes depending on the finishing work - Combines wooden structures with steel frames to achieve high seismic performance - Consistent manufacturing ensures stable high quality - The completed form with waterproof base is shipped directly to the site - Can be finished with preferred options such as painting or tiling - A one-of-a-kind original gate in the world *For more details, please refer to the PDF materials or feel free to contact us.*

• Car and bicycle parking facilities

Walls taller than 2,200mm can be constructed without a retaining wall! You can build a wall (fence) at the same height as the shutter gate.

"FIT HIGH-WALL" is a tall original seismic wall constructed by combining steel and wooden structures. Even walls exceeding 2,200mm in height can be built without the need for supporting walls, allowing for efficient use of site space without obstructing pathways. It is possible to achieve designs such as curves, slits, and cutouts that are difficult to construct with blocks, and walls (fences) can be built at the same height as the shutter gate. By delivering the completed form, including waterproofing, directly to the site, significant reductions in construction time and relief for on-site workers are achieved. *For more details, please refer to the catalog and PDF.*

• Fences, screens, and partitions

A seismic-resistant roof gate created with a gabled and hipped roof of a sukiya-style gate and a FIT structure. Depending on the finishing method, it can create both a Japanese and a Western atmosphere.

"FIT Gateway" is a modern original roof gate that combines the authentic Japanese-style gate "Sukiya Gate" with the original seismic-resistant gate "FIT GATE." It can be used in various situations such as personal residence access gates, Japanese-style shutter gates, and entrance gates for apartments and commercial facilities. We apply waterproofing to the base within the factory and ship the completed form directly to the site, allowing for installation to be completed on the same day. For large structures, the roof and columns are manufactured in separate parts and connected on-site. After installation, the finishing work is done by the construction company, ensuring high quality while reducing the workload and shortening the construction period. 【Features of FIT Gateway】 ■ A Japanese-style gate that fits modern architecture ■ Image changes depending on the finishing work ■ Combines wooden structures with steel frames to achieve high seismic performance ■ Consistent manufacturing for stable high quality ■ Completed form with waterproofing shipped directly to the site ■ Allows for preferred finishes such as painting or tiling ■ A one-of-a-kind original gate in the world *For more details, please refer to the PDF materials or feel free to contact us.

• Gates, walls and fences

Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be installed in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. *The model compatible with the perennial wall is made to order. We require about one month for manufacturing and delivery. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Prevents free rotation with rounded head bolts ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

• Earthquake-proof and vibration-damping equipment

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, tightening work can be performed by one worker from the site side, enabling a reduction in construction time. Compatible with perennial walls. *Please inquire about delivery times as this is a made-to-order product. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

• Earthquake-proof and vibration-damping equipment

High seismic resistance and free design! Achieving complete waterproofing and a non-rotting wooden structure!

"FIT GATE" is an original gate that enables high seismic performance and flexible design. It can be used in various situations, such as personal residence access gates, shutter gates, and entrance gates for apartments and commercial facilities. The gates are shipped directly to the site with waterproofing applied in the factory, allowing for installation to be completed on the same day. After installation, finishing work is done by the contractor, ensuring high quality while reducing the workload and shortening the construction period. 【Features of FIT GATE】 ■ Combines wooden structures with steel frames to achieve high seismic performance ■ Consistent manufacturing for stable high quality ■ Ships the completed form with waterproofing directly to the site ■ Allows for preferred finishes such as painting or tiling ■ A unique original gate, one of a kind in the world *For more details, please refer to the PDF document or feel free to contact us.

• Car and bicycle parking facilities

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html