GERB Floating Bed Construction Demonstration

Introducing a case where vertical vibration propagation was suppressed by a 1Hz floating floor!

We would like to introduce a case where a floating floor method was applied in the audience hall of a concert arena. In this facility, there are nearby apartments, schools, and hospitals, and if issues become apparent after completion, it could hinder operations. There were challenges in verifying and predicting vibration isolation effects in advance. Therefore, we designed and considered the project according to the site conditions, quantitatively predicting the vibration isolation effects through desktop studies. We also provided on-site support during construction. [Challenges] - A music hall within a complex facility, adjacent to hotels and commercial establishments - Few vibration isolation measures targeting low frequencies (2-3 Hz) - Insufficient effectiveness of vibration isolation using rubber materials *For more details, please download the PDF or feel free to contact us.

• Earthquake-resistant construction method

Introducing a case where a high vibration isolation effect was achieved using a gel floating floor!

We would like to introduce a case study that applied a floating floor method at a fitness (dance studio). In this facility, there were concerns about vibration transmission to the hotel within the same building. Additionally, due to height restrictions for the new building, it was necessary to reduce the floor height to secure the number of guest room floors in the hotel. Therefore, we implemented height reduction by embedding coil springs into the floating floor and conducted on-site vibration measurements to confirm the vibration isolation effectiveness after construction. [Challenges] ■ High-level vibration isolation performance is required as a countermeasure for fitness vibrations. ■ Conventional vibration isolation using rubber materials would require increasing the floor height, necessitating the reduction of one floor in the hotel. *For more details, please download the PDF or feel free to contact us.

• Earthquake-resistant construction method

By using coil spring support to create a floating floor at 3-5 Hz, vibration transmission is reliably suppressed!

We would like to introduce a case where the floating floor method was applied in a precision machinery manufacturing factory. In this factory, traffic vibrations from a nearby main road were occurring, leading to challenges in ensuring manufacturing quality and the need for advanced vibration isolation effects. Therefore, we conducted on-site vibration measurements and considered countermeasures based on the results. We optimized the design and layout according to the specific conditions of the site. [Challenges] ■ The vibration isolation using conventional rubber materials was insufficient. ■ It was not possible to verify or predict the vibration isolation effects in advance. *For more details, please download the PDF or feel free to contact us.

• Earthquake-resistant construction method

For vibration isolation of vibration testing machines and precision equipment. Achieves high vibration isolation in a compact space. Also prevents vibration transmission to the surroundings.

Our company proposes the "floating floor method" as a vibration isolation measure for vibration testing machines. By suppressing losses during vibration testing due to low natural frequencies, it contributes to obtaining accurate test results. Its space-saving design also allows for flexible adaptation to installation site constraints. Additionally, it can reduce natural frequencies from 2.5Hz to 7Hz, protecting work areas that are very sensitive to vibrations, such as those handling precision instruments, from mechanical vibrations and solid-borne sound. 【Features】 ■ High vibration isolation performance contributes to improved accuracy in vibration testing ■ Capable of reducing natural frequencies from 2.5Hz to 7Hz ■ Space-saving design makes it easy to install even in limited spaces *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Earthquake-resistant construction method

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On June 4, 2026, we published a page titled "Do We Set 'Forecasts' Too Optimistically Compared to Reality? The 'Planning Fallacy'." The 'Planning Fallacy' refers to the psychological phenomenon of underestimating the time, costs, and risks involved in carrying out tasks while overestimating the benefits. The page explains examples of its occurrence, the factors that lead to it, and methods to overcome it. (Page Overview: Excerpts) ■ What is the 'Planning Fallacy'? ■ Examples of the 'Planning Fallacy' ■ Why does the 'Planning Fallacy' occur? ■ How to overcome the 'Planning Fallacy'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/planning-fallacy-2026-06/

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Our company will be presenting at the "On-Site Made Easy! Latest Technology Seminar Vol. 20" (organized by Shinken Shimbunsha)! Kinos Logic will be speaking in Session 3 (15:50 - 17:00). We will provide a clear explanation of the tool "Seigou Navi," which can streamline the review of civil engineering drawings on a PC, using real-life examples. ■ Event Overview Date and Time: June 30, 2026 (Friday) 13:00 - 17:00 *Entry starts at 12:30 Format: Zoom (online broadcast) Capacity: 300 participants for the Zoom live broadcast Participation Fee: Free (Note: Additional fees for continuing education unit application services, etc.) Application Deadline: June 26 (Friday) 17:00 Organizer: Shinken Shimbunsha