Aiming for Zero Workplace Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, and will explain the characteristics of protective gloves and their proper usage.

Work that requires protective equipment occurs not only in manufacturing but also in various industries. Among the many types of protective gear, gloves in particular come in a wide variety, and there may be cases of improper use, reuse, or instances where protective gloves are not used despite the work being hazardous. However, neglecting such situations leads to the abandonment of [unsafe behaviors] and [unsafe conditions], as discussed in VOL.3, increasing the likelihood of workplace accidents. In 2023, "cuts and abrasions" ranked 5th (5.61%) in workplace accidents, while "contact with harmful substances" ranked 13th (0.45%). However, it is believed that there are potentially many more near misses that did not result in accidents. This time, we will focus on the more frequent incidents of cuts and chemical injuries, discussing the characteristics of different types of protective gloves and their proper usage.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

Since 1988, the number of casualties from workplace accidents has been decreasing, but since 2000, the decline has plateaued. In White Paper Vol. 2 [Winter Season Sees a Surge, Preventing Falls], we addressed the causes and preventive measures for falls, which are the most common workplace accidents. But why do workplace accidents occur in the first place? This time, we would like to focus on protecting the safety of workers and discuss the mechanisms behind workplace accidents and their prevention.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

The Ministry of Health, Labour and Welfare has established new regulations to prevent work-related accidents caused by chemical substances.

Starting from April 1, 2024, it will be mandatory for workplaces that handle chemical substances such as sodium hypochlorite (bleach), sodium hydroxide, and potassium hydroxide to require the wearing of protective eyewear. 【Details of the New Regulation】 ■ Workplace Structure 1. Workers handling chemical substances must wear appropriate protective gear, such as protective eyewear. 2. Establishment of a system for self-management. (1) Appoint a chemical substance manager. (2) Appoint a protective gear management officer. ■ Prevention of Direct Contact with Hazardous Chemical Substances When engaging workers in tasks that involve the manufacturing or handling of chemical substances that are skin or eye irritants, corrosive to the skin, or can be absorbed through the skin and cause health issues, it is necessary to require workers to use protective gear to prevent injuries, according to the harmfulness of the substances. For more details, please refer to the materials.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Compatible with a wide range of solvents. Can be used as inner gloves.

【Features】 ■ Compatible with a wide range of solvents ■ Ambidextrous disposable type ■ Can be used as inner gloves ■ European standards EN420/374 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "Secupro 625" solves the problem of cutting thick materials like cardboard, where "it’s hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "Secupro 625" is designed so that the blade does not extend unless it is held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Work tools

Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

"Try Lights" are gloves made from three types of materials: natural latex, neoprene, and nitrile, each possessing the three characteristics of "elasticity," "chemical resistance," and "durability." The surface is embossed, making them effective for tasks such as cleaning where items may easily drop. As thin gloves, they offer a wide range of chemical resistance and serve excellently as inner gloves for chemical work that requires thicker gloves. [Features] ■ Three types of materials providing "elasticity," "chemical resistance," and "durability" ■ Slip-resistant processing ■ Wide range of chemical resistance ■ No waterproof powder ■ Surface treated with chlorine for sterilization ■ FDA (U.S. Food and Drug Administration) certified *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Attendance management is something that is expected of every company and should be addressed. When asked, "Are you doing it?" it might be more concerning to hear, "Are you doing it correctly?" which could make some responsible parties feel anxious. You may be using time cards for clocking in, but are unsure about overtime calculations. You might be having employees input data into Excel, but how does that stand in terms of legal compliance? You may be managing paid leave on paper, but there’s no room for double-checking. Employee resignations may be ongoing, but could this be due to overwork...? Why not review the various pros and cons of different attendance management methods and revisit the important aspects of attendance management from the "basics"?

We have released a white paper titled "The Common Points of Attendance Issues Highlighted by the Labor Standards Inspection Office." This document provides a clear explanation of the challenges in attendance management that are likely to be pointed out by the Labor Standards Inspection Office, using specific examples. It addresses operational risks commonly seen in many companies, such as attendance aggregation in Excel, timekeeping management through self-reporting, insufficient management of paid leave, and rounding of overtime hours. Additionally, it introduces points that are often highlighted in inspections by the Labor Standards Inspection Office, such as "objective understanding of working hours," "unpaid overtime," "management of the 36 Agreement limits," and "compliance with the obligation to take 5 days of annual leave." This content can serve as an opportunity for companies that think "there have been no problems so far, so it's fine" to review their operations. Companies considering improving the efficiency of attendance management and strengthening compliance are encouraged to take a look. If you have any additional questions, please feel free to let us know.

What do the members of the back office department consider when choosing or replacing a system? If the same product is handled by both a "manufacturer" and a "distributor," how do you feel about it? "Distributor"? Isn't it cheaper to buy directly from the manufacturer? It's obvious that receiving direct service is better, right? ...Is that really the case? In the materials we are releasing this time, we will explain the benefits of "introducing a distributor." Here’s a preview of the materials: 【If you’re going to choose, you should leverage the power of a distributor that handles the ○○ system!】 【Make the distributor your ○○○○○○○ and use them to the fullest!】 Along with these points, we are offering a "Distributor Evaluation Checklist" that will be your strong ally, free of charge! Please make good use of it.

Cutting in metal processing is not just a process of simply dividing materials. It is necessary to choose the appropriate method according to the type and thickness of the material, as well as the required precision, whether it be laser cutting, plasma cutting, or mechanical cutting. Additionally, fine adjustments of conditions during cutting and management of distortion due to heat greatly depend on the experience and skills of the operator. How does high-quality cutting affect subsequent welding, bending processes, and the quality of the final product? For more detailed explanations, please visit the Kando Industrial website! You can find the continuation through the related links.

We are pleased to announce that in the software "INtime for Windows," which enables real-time control on Windows, we are now working on the development and verification for support of AMD CPUs in addition to the Intel CPUs we have traditionally supported. On the following page, we have published performance data and a video titled "The Possibilities of PC-Based Control Created by AMD CPU x INtime RTOS" using PCs equipped with AMD CPUs. We invite you to take a look at this opportunity. https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #RealTimeOS #PCControl #AMDCPU #Ryzen