We are offering the 【Wire Mapper NC-100】 at a special price, which allows you to easily check the wire map of LAN cables and telephone lines, as well as perform tone generation!

The new cable length measuring device 'TV220E' can detect instantaneous cable faults without missing them, and it also allows for comparative display of measurement results with the "two phenomenon comparison"!

The "TV220E" is a TDR cable length measurement device that can detect cable breaks and short circuits without missing any issues. It can handle difficult faults with high sensitivity up to a maximum length of 5.6 km, achieving ultra-high precision measurements of ±0.01%. Saved waveforms can be shared via USB or Bluetooth. Results can be saved, shared, and printed on a PC using dedicated software. 【Features】 ■ Ability to identify the type and location of faults using waveforms (breaks, short circuits, ground faults, branching, poor connections) ■ Easy diagnosis with an advanced large color LCD screen ■ Rechargeable lithium-ion battery ■ Tone generator function for cable tracing ■ Dual phenomenon display for comparing good and faulty lines ■ Advanced zero-blind specification allowing measurements from 0m ■ A robust, waterproof case-integrated model, the "TV220EX," is also available! *For more details, please download the PDF or feel free to contact us.

• Distance measuring device/length measuring device

[New Product] Capable of exploring wiring routes within a range of 3 meters from the cable, with a detection distance of 7 km!

The "Super Piro-chan SP780" is a digital cable and breaker locator that combines a tone probe and cable locator, capable of exploring wiring routes within a range of 3 meters from the cable and a distance of 7 km. It achieves exploration that is completely unaffected by noise through a digital transmission and reception method. It can reliably identify lines from 0V unpowered lines to 600VAC live lines. Additionally, with a non-contact clamp (sold separately), it is possible to transmit exploration signals from the middle of a cable. 【Features】 ■ Automatic and manual reception mode switching allows for targeted line exploration based on the situation. ■ Reliable identification of breakers and devices compatible with outlets and terminals. ■ Instant selection of target lines within racks or shafts from above the insulation. ■ Ability to send signals to hidden cables and explore all wiring routes within a building. ■ Safe non-contact transmission enables identification of wiring routes and terminal devices. ■ Pinpoint detection of disconnections, ground faults, and low-resistance ground fault locations is also possible. *For more details, please refer to the PDF document or feel free to contact us.

• others

You can perform cable length measurement, diagnostics, and data storage on a large color screen tablet! A tester that can measure the distance to breakpoints and minor faults!

The "TX Ranger S" is a TDR cable measurement and diagnostic device that can identify the distance to even minor faults. Measurement results are analyzed on a PC screen using dedicated software. It can store up to 50 events in the main memory. Additionally, it features a dual phenomenon display that allows for comparison between good and faulty lines, and it is compatible with all metal cables with two or more cores. 【Features】 ■ Capable of identifying the distance to minor faults ■ Measurement of remaining length of removed cables or drums ■ Cable fault information is displayed in waveform ■ Wireless transmission of measurement data via Bluetooth ■ Fault diagnosis of terminal devices and sensors is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK