Detecting abnormal heat (abnormal temperature) of the storage battery with standby power at 0 / New product for temperature detection sensors for storage batteries.

Optimal safety measures for abnormal temperatures in storage batteries / New product for storage battery alarm systems

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, allowing for monitoring and alarming of abnormal temperatures. 2. The abnormal temperature of the battery is continuously monitored on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of battery equipment can be carried out reliably and safely. 4. This is the ideal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (Type 1, 120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wires and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, has good accuracy, and employs eco-technology with zero standby power through its switching function. 6. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Battery abnormal temperature detection alarm / New product for battery abnormal temperature alarm device

■Features of the Abnormal Temperature Alarm for Batteries 1. Capable of detecting and alarming for abnormal temperatures in each battery. 2. An eco-technology that can detect and alarm for abnormal temperatures in each battery with zero standby power. 3. Allows for regular centralized monitoring of abnormal heat (abnormal temperatures) in each battery. 4. Battery equipment inspection tasks can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures in each battery and alerts through an alarm to prevent equipment damage and fires. 6. A product that integrates numerous shape memory alloys at equal intervals along an extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Power generation equipment
• Substation equipment
• Power distribution and control panels

A new product for temperature sensing (70℃) that can directly sense temperature and signal through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate a signal through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the collective monitoring of various abnormal temperatures on a daily basis, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reset. The activated location can be deleted and reconnected.)

• Facility Design

Detecting abnormal heat (abnormal temperature) of batteries with standby power at 0 / New product for battery temperature detection sensors

■Features of Temperature Detection Sensors for Storage Batteries 1. It can continuously monitor and detect abnormal heat generation (abnormal temperature) of storage batteries. 2. It can continuously monitor and detect abnormal temperatures of wires and electrical equipment in the charging/discharging circuit of storage battery systems. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature: 70°C] 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and generate signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operation is based on physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once detected, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

An article has been published regarding the case study of the introduction of the expense reimbursement system "Rakuraku Seisan" and the attendance management system "KING OF TIME" at Racam Co., Ltd. ~ In the case of Racam ~ Before the introduction of "Rakuraku Seisan," applications were paper-based. One person was responsible for checking the contents for about 100 individuals using a calculator. Since actually using the system, various tasks related to determining who to pay and how much have been reduced, and it has become possible to import the crucial journal entries. Most importantly, the elimination of the need to research transportation costs one by one has been a significant improvement. The successful implementation of the attendance management system was made possible by the generous support provided by iBP. [Case Overview (Partial)] ■ Challenges Before Implementation - Wanted to eliminate paper-based reimbursement and application processes ■ Key Points of Implementation - High recognition of Rakuraku Seisan - With iBP, both expense reimbursement and attendance management can be handled together *For more details, please refer to the related links or feel free to contact us.

"Somewhat inconvenient" can quickly transform into "cost" and "risk" due to an increase in the number of employees or an expansion of business scope. What we are introducing this time is the process of a home care industry company with around 700 employees verbalizing their frustrations regarding payroll operations and considering the optimal system configuration. When we verbalize "somewhat inconvenient"... 1) The support quality of the payroll system being used is poor, causing significant stress. 2) The number of employees has been on the rise in recent years, raising concerns about running costs due to the pay-per-use system. 3) Macros are being used for data integration with a separate system. 4) We want to make backend processes like payroll payment reports easier. Information from iBP What is important here is to decide how to handle the multiple issues that have arisen, which is the "prioritization of tasks." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/36302

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have released an introduction document for our cloud management system "Loglass." This document clearly presents the features and usage images of "Loglass," which streamlines management tasks such as budget formulation, performance management, forecast updates, and management accounting. Loglass centralizes data scattered across various systems and spreadsheets, reducing the effort required for collection, aggregation, and analysis, thereby supporting quicker and more accurate management decisions. Additionally, it helps address challenges such as the personalization of management tasks and increased workload through automation of data aggregation, history management, and real-time analysis functions. The document also includes actual implementation examples and the effects of implementation, showcasing results such as reduced workload, enhanced analysis capabilities, and improved decision-making speed. Companies considering promoting DX in management or reviewing operations centered around Excel and spreadsheets are encouraged to take a look.