Introducing products for rainwater and condensation prevention during the rainy season!

Introducing kitchen hygiene products that are a concern during the hot season!

● Measures against oil stains in front of fryers, grills, and grease traps If the oil stains on the floor caused by cooking are left unattended, they can easily lead to slip-and-fall accidents. Additionally, they can stick to the soles of shoes and be carried to other areas, causing the dirt to spread. During hot seasons, such as summer, neglecting the oil stains in grease traps can also lead to unpleasant odors. ● Measures to prevent the carrying out and spreading of oil stains in entrances and corridors Preventing the spread of oil and dirt on the floor is extremely important. By preventing the transfer of dirt to other areas, we can avoid slip-and-fall accidents and significantly reduce the time and cost of cleaning the entire facility.

• Safety and consumables
• Disaster prevention supplies
• others

Introducing products for rainwater and condensation prevention during the rainy season!

● Measures to Prevent Slips at Entrances and Walkways On rainy days, the ground becomes slippery due to moisture brought in from outside. To prevent accidents where employees or customers might slip and fall, it is necessary to implement measures that keep the floor dry and ensure safety and comfort on rainy days. ● Measures to Prevent Condensation Around Walls and Refrigeration Equipment During the rainy season, high humidity can lead to condensation, which, if left unattended, can cause water to drip and spread, becoming a slip and fall hazard. However, using rags to clean up the water can compromise aesthetics and lead to mold growth due to bacterial proliferation. Therefore, it is essential to find efficient ways to absorb leaks while also considering the appearance.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• Other store equipment and supplies
• Refrigerated showcase

We will outline a path for companies to become resilient to flooding and provide specific methods to minimize risks.

The rainy season has fully set in, but are you adequately prepared for flood damage? In "Flood Damage Countermeasures During the Rainy Season Part 2," we outline the path for companies to become resilient against floods and provide specific methods to minimize risks. In Part 1, we explained the recent occurrences of flooding, the use of hazard maps for flood prediction, and securing evacuation routes. In Part 2, we will focus on the types and quantities of supplies needed during a disaster, how to develop a Business Continuity Plan (BCP), and advanced initiatives. We hope that by sharing know-how for immediate and appropriate responses during disasters, we can contribute to the safety of your company.

• Refrigerated showcase

I will answer the question, "How should companies prepare for flood damage prevention?" Now, before the rainy season begins, let's prepare for typhoons and heavy rains.

Flood damage poses a significant risk to businesses. In recent years, the damage caused by floods and heavy rains has increased, greatly impacting corporate performance and sustainability. For example, the damage from the heavy rains in western Japan in July 2018 and Typhoon No. 19 in October 2019 is still fresh in our memories, and it is important to learn from these cases. Every time we see news about corporate facilities such as offices, warehouses, factories, and stores suffering from flooding, many stakeholders may worry, "Is our company going to be okay?" Measures against flooding have become extremely important for business continuity. To address the question of "How should companies implement flood prevention measures?", we will introduce the basics of flood prevention in two parts. Now, before the rainy season begins, let’s prepare for typhoons and heavy rains.

• Safety and consumables
• Disaster prevention supplies
• Refrigerated showcase

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

A clean, reusable, aesthetically pleasing water-specific sock-like absorbent material. It can be used to prevent water leaks and condensation from refrigerators, freezers, and cold cases.

- Made of polypropylene, it has the effect of suppressing mold growth, allowing for safe use over a long period. - By squeezing out the absorbed water and allowing it to air dry, it can be reused. Please avoid sun drying or using a dryer. Reuse is recommended up to three times. - Even after reuse, it maintains its shape well and is less prone to bacterial growth, which helps control odors. - It is flexible and fits well around the refrigerator and in corners. - The polypropylene cover is resistant to tearing and durable.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• Other store equipment and supplies
• Refrigerated showcase

The special adhesive material on the back prevents the mat from slipping and keeps it in place!

**Features** ■ Absorbs oil and water Absorbs oil, coolant, solvents, and water. ■ Wear resistance and durability The surface of the mat is sewn with polyester stitches into spunbond nonwoven fabric, providing excellent wear resistance and durability. ■ Adhesive backing The back of the mat is made of adhesive material, preventing it from shifting or bending even when walked on or when carts pass over it. The back is coated to prevent absorbed liquids from seeping through to the floor. ■ Easy to cut Can be cut to the desired size with scissors or a cutter. ■ Flame retardant compliant product

• Cooking facility equipment and supplies
• Restaurant furniture and equipment
• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI