We introduce a reusable absorbent mat for areas troubled by water.

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

Measures against flooding damage caused by typhoons and heavy rain! Uses superabsorbent polymer *Video explanation available.

● It is a water-absorbing, inflatable, bag-shaped simple dam. ● Recommended for flood prevention measures against heavy rain and typhoons. ● Before absorbing water, it is lightweight and easy to handle, and can be stored compactly. It won't be a nuisance even if kept on hand. ● When in use, fill the container with about 20 liters of water for each Pig Water Bag, and knead it by hand while allowing it to absorb water. It will inflate in about 5 minutes. ● The Pig Water Bags can be stacked up to three layers. ● If unopened, the shelf life is approximately 5 years. *Currently, we are offering a document summarizing recent trends in flood damage.

• Disaster prevention supplies

The most common workplace accident in the country is slipping and falling! The causes vary, including dust and liquids. Solve the problem with Plastex Lok, which is resistant to both dust and liquids!

In 2020, the most common type of injury accident reported by the Ministry of Health, Labour and Welfare was falls. Approximately 30,000 workers are affected each year, which translates to about 86 injured or deceased individuals per day. Plastex Lok features countless protrusions processed to be slip-resistant on the surface, helping to prevent falls for workers. Additionally, its high drainage performance and interlocking tile mat design allow for easy installation and flexible layout changes. ■ Recommended sites - Areas where large amounts of liquids or dust spill - Workstations, assembly lines, laboratories, engine manufacturing, thin plate processing

• Other commercial buildings and service facilities
• Reinforcement and repair materials
• Paving Materials

A mat that helps prevent slipping and falling by absorbing dirt from shoe soles and moisture from snow and rain. The back is coated with a water-resistant adhesive, so the mat won't slip!

Features of the "Piggrippy Floor Mat" ■ Liquid-proof Issue: Risk of slipping and falling due to liquid on the floor Solution: The liquid on the mat is securely retained inside the mat! ■ No tape required for fixation Issue: It's troublesome to secure the mat with tape to prevent it from shifting Solution: The back of the mat is made of adhesive material. It can be fixed without tape! ■ Minimal adhesive residue on the back, allowing for reapplication Issue: It's difficult to remove adhesive residue from the floor when tape is used Solution: The back of the mat uses low-residue adhesive material. It can be reapplied! ■ Washable mat due to non-water-soluble adhesive Issue: The mat peels off when cleaning the floor while it's laid down Solution: The back of the mat uses water-resistant adhesive material. The mat won't peel off even if water splashes during floor cleaning! ■ Easy installation with separately sold installation board and safety cutter Convenient installation board for cutting the mat to your preferred size and a safety cutter designed to prevent cutting accidents are also available for purchase. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• Safety and consumables
• Rain protection items

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.