Announcement of participation in "Maintenance Resilience TOKYO 2024 (Infrastructure Inspection and Maintenance Exhibition)" from July 24 (Wednesday) to July 26 (Friday), 2024. We will be showcasing the weather-resistant, rust-proof, and corrosion-resistant primerless fluororesin paint "Sabimasen."

Active as seals for wall panels, various devices, and duct joints in clean rooms! Siloxane-free fluororubber sealant!

=Free samples available!= The high-viscosity fluorine paint "HVF-1" is a high solid content, high viscosity fluorine paint made primarily from fluororubber, which excels in heat resistance, chemical resistance, oil resistance, and electrical insulation. It is a siloxane-free sealant that minimizes contact failures in precision equipment. If you are troubled by discoloration due to heat or chemicals, or difficulty in painting due to liquid dripping, please give it a try! Its high viscosity allows for thick application. It can also be used as a sealing agent, filler, or repair material. *Note that shrinkage may occur due to the evaporation of the solvent used. 【Features】 - Made primarily from fluororubber with excellent resistance to various factors - Minimizes liquid dripping during application - Excellent chemical resistance, acid resistance (such as hydrochloric acid, nitric acid, sulfuric acid), alkali resistance (such as caustic soda, ammonia), oil resistance, and heat resistance - Electrical insulation (10^12 to 10^13 Ω·cm) - No silicone used - Low molecular siloxane (D3 to D20) not detected ◎ For more details, please contact us or download the PDF materials. *If you would like a sample, please indicate that in your request.

• Anti-rot, anti-termite, anti-mold material
• paint

Effective for rust prevention, corrosion resistance, and weather resistance!! Currently used in salt damage, chemical atmosphere, and hydrogen sulfide resistance!

The Jet Protector F-200SI is a spray that allows for easy application of high-performance fluororesin paint. 【Features】 ○ The coating is colorless and transparent. (Gray color is also available) ○ Excellent adhesion (can be directly applied to metals, non-ferrous metals, and resins) ○ Outstanding weather resistance, preventing fading of the substrate. ○ High airtightness, maintaining excellent rust and corrosion prevention (countermeasures against salt damage and hydrogen sulfide) *For more details, please download the catalog or contact us.

• Exterior coating materials
• Outdoor stairs
• paint

☆A primer-less type that can be applied directly to the substrate! ☆Colorless and transparent, allowing the underlying color to shine through! (Color matching is also possible) ☆Fluorine coating made easy for anyone!

Environmentally friendly fluororesin paint with a low solvent formulation that protects various equipment and structures from rust and corrosion. 【Environmental impact test data now available!】 ☆ Last year in 2023, we launched the strongest class coating for iron and non-ferrous metals, "Sabimasen," and we have now renewed the catalog! As an application example, this product is introduced for countermeasures against corrosive gases (hydrogen sulfide) and salt damage, and we have conducted gas exposure tests and salt spray tests to confirm its effectiveness with more specific reference data. For the results, please click on the "PDF Download" below to download the materials and check them! If you have any questions about the data, please feel free to contact us!

• others

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We will be exhibiting at the only comprehensive and cross-sectional international convention in the marine field in Japan, "Techno-Ocean 2025." In this exhibition, we will introduce a wide range of specialized survey services related to offshore wind power generation projects, including wind and sea condition surveys, O&M, sediment surveys, and fishing ground environmental monitoring. We will also showcase marine surveys and seagrass bed investigations using marine robots such as autonomous surface vehicles (ASVs) and underwater drones, as well as the collection of dead fish in aquaculture operations.

The energy policy promoted by the government has finally made a significant shift from "quantity to quality." The previous large-scale introduction of renewable energy policies relied on inexpensive foreign-made panels, leading to the chaotic installation of mega-solar farms across Japan's land, which created environmental, landscape, and waste issues. As a result, Japan's energy self-sufficiency rate remains at a mere 13%, and even with the advancement of renewable energy, "import dependence" has not been resolved. In light of this reflection, the focus moving forward will be on "developing domestic energy technologies" and promoting "self-consumption type renewable energy." Among these, perovskite solar cells are lightweight, highly efficient, and offer great flexibility in installation, making them a trump card for "decentralized renewable energy" that can be easily retrofitted onto building walls and roofs. Kenneth Energy Development Co., Ltd. is developing a "selective self-consumption solar power generation system" that utilizes domestic panels and perovskite technology. Based on a track record of 83 projects nationwide and a total construction cost of 908.4 billion yen, it supports the industry's "energy independence." Now, renewable energy is entering an era of "security infrastructure."

"Perovskite solar cells" are once again emerging at the center of Japan's renewable energy policy. Mr. Takai has proposed "nurturing domestic technology for renewable energy" as part of energy and industrial policy, causing related stocks to attract attention in the market as the "Takai trade." The background to this is Japan's long-standing dependence on foreign-made panels in its renewable energy structure. While inexpensive imports have supported proliferation, they have also left a "negative legacy" of forest development, disposal risks, and price fluctuations. If this continues, both the land and energy supply will be controlled by foreign entities—this sense of crisis is the trigger for policy change. Perovskite solar cells possess the trifecta of being lightweight, highly efficient, and low-cost, making installation in existing buildings easy. Development is progressing as a domestic technology, and it is expected to become a mainstay for self-consumption power generation in the future. Kenneth Energy Development Co., Ltd. is developing a "next-generation self-consumption solar power system" with an eye on these perovskite cells. With over 8,000 installations nationwide and expertise in subsidy support, they are turning companies' "energy independence" into reality.