Introducing the "SecuMax Easy Safe," a safety cutter designed to prevent injuries to people and products, perfect for hazard prevention!

The blade tip is built into the main body and is designed to avoid injuring people or products. It's a safety measure for cutting thin materials!

The "SecuMax Easy Safe" is a cutter with a safety design that allows for opening by making a hole in the nose part of the main body. 【Features】 ■【Safety Level 3】Prevents product damage and achieves higher safety To maximize safety, the blade tip is built into the main body. It is designed to avoid injuring people or products. ■Holder bracket that can hold thin films and paper The holder bracket, which is attached in front of the blade, holds thin films and paper, making it easy to cut them one by one. ■Left-handed compatible *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This is an introduction to items that help improve the working environment in warehouses.

Standing work that strains the lower back. Let us help improve that discomfort with fatigue-reducing mats! Prevent cutting accidents with German-made safety cutters!

• Work tools
• Safety and consumables

To achieve maximum safety, the blade tip is built into the main body and is designed to avoid injuring people or products. It is also suitable for left-handed users.

A compact disposable cutter that can be used for various cutting tasks. The grip is made of fiberglass-reinforced plastic, and the blade is 0.5 mm thick, making it lightweight and durable, suitable for professional use. It easily cuts through cardboard, stretch film, rolled sheets, packing tape, and more with its sharp cutting edge. 【Product Information】 ■ Size: Length 118 mm × Width 35.4 mm × Thickness 4 mm ■ Weight: 12 g ■ Quantity: 10 pieces per box ■ Main material: Reinforced plastic (with fiberglass)

• Work tools
• Office supplies and stationery
• Packaging materials

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "Secupro 625" solves the problem of cutting thick materials like cardboard, where "it’s hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "Secupro 625" is designed so that the blade does not extend unless it is held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Work tools

The long-established German manufacturer 'MARTOR Safety Cutter', loved in over 70 countries worldwide, provides safety and peace of mind in cutting operations.

We handle the "Safety Cutter" manufactured by Martar. To ensure safety, we offer models such as the "SecuMax," which has the blade tip built into the body, as well as the easy-to-use entry model "SecuNorm." We aim to reduce cutting accidents caused by cutters in Japan and help provide safety and peace of mind to workers. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables

Heat-resistant, oil-resistant, and insulating materials! Mats effective for reducing fatigue during standing work and improving safety.

The "Floor Mat Comprehensive Catalog" is a catalog that addresses various needs, including mats that enhance safety and mats that reduce fatigue during standing work. Additionally, it includes mats suitable for floor protection, maintenance, vibration and sound insulation, as well as use in bathrooms and pools. There are also products that can accommodate special applications using anti-static materials, insulating materials, and heat-resistant materials, making them suitable for use in research facilities. [Contents] ■ Fatigue-reducing mats ■ Slip-resistant mats ■ Floor protection and maintenance mats ■ Vibration and sound insulation mats ■ Mats for bathrooms and pools *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables
• Safety Supplies

An article about the resin-based lightweight formwork system "PERI DUO" has been published in the "Construction News" (November 7, 2025)! "PERI DUO" is a new system formwork made of resin that can be used for walls. It is made from a newly developed material called "Politec," which is high-strength and lightweight. With fewer components, it is easy to handle. It allows for increased reuse and is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components and easy to handle ■ 100% recyclable *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

【New Product Announcement】 UV - Ultra-Compact Irradiator LSP26FUV Series Released High intensity yet compact, a palm-sized cube-type ultra-compact UV irradiator. It offers a variety of UV wavelengths and can be used for a wide range of applications. Due to its compact size that fits in the palm of your hand, it is very convenient for simple inspections and research experiments, as well as other small tasks. *Details about the product features and specifications are currently being prepared. They will be published soon, so please wait a little longer. For more information, please feel free to contact us.

Japan Aluminum Co., Ltd. will exhibit at the High-Performance Materials Week "Adhesive and Joining EXPO" ~Proposing solutions for joining aluminum and resin~ This exhibition is one of the events that make up the "High-Performance Materials Week," which features cutting-edge material technologies, and is one of the largest comprehensive exhibitions in Japan for adhesives, joining machines, and fastening technologies. The Japan Aluminum Group will showcase various functional surface treatments currently under development, focusing on the joining solution PAL-fit for aluminum and resin. We sincerely look forward to your visit and hope you take this opportunity to see our offerings. https://www.nikkeikinholdings.co.jp/news/news/p2025110501hd.html Event Dates: November 12 (Wed) to 14 (Fri), 2025 10:00 AM to 6:00 PM (Ends at 5:00 PM on the final day) Venue: Makuhari Messe Hall 7 (Chiba City, Chiba Prefecture) Our Booth: Hall 7, 42-26

In recent years, with the increasing push for DX (digital transformation) and valuable feedback from all users in the field, we will be fully renewing "Compass PLUS." The new Compass PLUS will leverage its traditional strengths while completely revamping its design, functionality, and usability, thereby further enhancing its value in practical use. The official release is as follows, so please wait a little longer until then. 1) Improved visibility and operability 2) Enhanced intuitiveness 3) Streamlined information sharing These are the main points of improvement, and it will be available starting December 16, 2025. For an overview of the renewal, please download the materials. We are also planning an online briefing session, so please download the materials for more details as well. Renewal date: Tuesday, December 16, 2025 Temporary suspension period: Monday, December 15, 2025, 17:00 – 19:00 *Due to the renewal, data updates for observation devices (wave height, weather, water level, noise and vibration) will be suspended during the temporary suspension period. However, viewing of forecast information and other various information will still be possible as usual.