[Exhibition Decision] 5th Industrial Furnace and Related Equipment Exhibition & Symposium (Thermal Technology 2024)

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the adaptation of its proven in-house burners for hydrogen use.

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion For heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by about 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! For aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is high at 75%. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

• Hydrogen Production

In the face of uncertainty regarding future energy supply, we are advancing efforts towards high-efficiency "electrification" and "hybridization" based on gas combustion furnaces.

**Electrification of Thermal Equipment** In an uncertain future for energy supply, we are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces) to offer multiple options to our customers as an industrial furnace manufacturer. The electric hot air generator (AH-E) can replace our gas combustion type without significant changes to the equipment layout, allowing for electrification. **Hybrid Heating of Electric and Combustion Types** We have numerous achievements not only in fully electrifying thermal equipment but also in hybrid heating that combines the advantages of combustion types. We address challenges such as "securing green power, reducing costs, and ensuring power capacity" through hybrid solutions with combustion types. In addition to improving the efficiency of electric systems, energy-saving systems that utilize waste heat for gas burners are also possible. By incorporating hydrogen gas burners, we achieve carbon neutrality! **We Conduct Practical Verification Tests** We conduct various heating tests at the newly established "Thermal Technology Research Institute" within the Horyuji Center. Among these, the "QCO Test Facility" allows for heating tests with four different heat sources! We propose thermal equipment suitable for workpieces using gas, electric, hydrogen, and hybrid heat sources.

• Steel
• others
• Manufacturing Equipment

At Seiei Manufacturing, we are proposing low-carbon painting drying ovens to respond to a decarbonized society.

At Shoei Manufacturing, which has extensive experience with painting drying ovens and exhaust gas treatment systems, we offer both "hydrogen combustion type" and "electric heater type" options. By using "renewable energy sources" and "hydrogen fuel," we can achieve decarbonization. Even if these options are not currently available, we can adapt to the uncertain future of energy supply by introducing: - A hybrid type that electrifies part of the heat source configuration - A hydrogen gas burner that can also use city gas/propane gas 【Painting Curing Drying Oven】 Hot Air Zone (100–250°C) ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" Radiant Curing Heating Zone (700–850°C) ⚪︎ Electric infrared heater ⚪︎ Hydrogen combustion burner Water Removal Drying Oven (100–150°C) / Booth Heating ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" 【Exhaust Gas Treatment System / VOC Treatment】 ⚪︎ Electric catalytic deodorization system (CT) ⚪︎ Electric regenerative thermal oxidizer (RTO) Our Thermal Technology Research Institute is equipped with a painting drying test oven (QCO) that includes a painting booth.

• Metal siding

A test furnace based on actual equipment, with dissolution using a hydrogen burner and retention using an electric heater. Thorough testing for decarbonization in aluminum casting sites can be conducted together with our customers!

It is possible to conduct aluminum melting tests using hydrogen combustion with ingot input. Please use it to verify the quality of the molten metal and its impact on the products. The melting gas burner employs a hydrogen burner and electric heaters for retention! It is a hybrid furnace that enables carbon neutrality. By exchanging burner parts, you can switch between fuel gases (hydrogen/LNG (natural gas)/LPG), allowing for adaptability to trends in gas supply. Additionally, the furnace structure has a high oxide suppression effect, so you can confirm this effect in actual operation. We are committed to solving problems in aluminum casting sites and promoting low carbon emissions. Please feel free to reach out to us. ~Equipment Overview~ Test Furnace: Aluminum Handheld Melting Retention Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150 kg/h Retention Capacity: Retention Chamber 800 kg/ch *Actual effective capacity during continuous melting, specific gravity 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ~Heat Source Configuration~ Melting Burner: Hydrogen Combustion Burner 116 kW × 1 unit Retention Heater: Immersion Type Electric Heater 9 kW × 2 units Fuel Used: Hydrogen (city gas 13A and propane gas are also possible) Power Supply: 200V/60Hz for power, 100V for operation

• Aluminum sash

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room No. 12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities prepared. We look forward to welcoming everyone!

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools