We will exhibit at the 10th Heat Wave Countermeasures Exhibition.

A harness-compatible cooling vest that can be worn under fan-equipped clothing, powerfully cooling two units in just 3 seconds.

The two cooling units on the back of the vest cool the body powerfully. Wearing it under fan-equipped clothing enhances the cooling performance. It is a full harness-compatible model, which is great for high-altitude work. The two cooling units on the back of the vest cool powerfully at a maximum of -14 degrees (※). It uses a Peltier system, similar to that of a small refrigerator. It takes just 3 seconds after turning on the power for the cooling units to start cooling. It quickly cools the body even over clothing. This is a powerful cooling item to help you get through the hot summer. Please feel free to consult us when you need assistance. 【Specifications】 ■ Size: M to 3L (fits chest sizes up to 160cm) ■ Contents: Main unit, Japanese instruction manual ■ Power supply: Requires a separate mobile battery ■ Operating time (when using a 10000mAh battery) - High: 3 hours - Low: 4 hours ※ Cooling performance may weaken depending on the usage environment and the performance of the mobile battery. ※ For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Cools in 3 seconds! For heat countermeasures in factories during hot seasons or under the blazing sun, powerful cooling with refrigerated clothing's cooling plates and dual fans!

The "Refrigerated Clothing 3" is an overwhelmingly cooling work vest featuring an ultra-cold plate and a powerful fan. It maintains coldness with a Peltier plate installed on the back while two strong fans on both sides draw heat away from inside the clothing! By using a 10,000mAh (sold separately) USB mobile battery, it can be used for up to approximately 3 hours and 30 minutes. By replacing the battery, it can be used all day long. 【Features】 ■ Cooling starts in 3 seconds, overwhelmingly cooling with an ultra-cold plate and powerful fan ■ Collaboration with a specialized workwear manufacturer allows for a variety of colors and sizes ■ Using a 10,000mAh USB mobile battery allows for up to approximately 3 hours and 30 minutes of use (can be used all day long by replacing the battery) ■ Parts can be easily removed and washed thoroughly * For more details, please refer to the PDF document or feel free to contact us. * Sizes 3L and 5L have sold out for this season due to popular demand.

• Heating and cooling equipment and facilities

Cooling down your heated body with cold water circulating all over! A full-body water-cooled suit that can be worn over and under clothes for heat protection.

Exposed to the hot sun while working on-site or in stuffy indoor jobs, the heat can be overwhelming... For you, we recommend Sanko's full-body water-cooled suit! Now upgraded with an expanded cooling range to include the lower body in addition to the upper body, it has made its debut. By filling the tank on the back of the suit with ice water, cold water circulates through the hoses to cool down your body. The water-cooled suit is slim and can be worn under uniforms. Additionally, it can be used as just a vest depending on the scene or situation. It is also ideal for those working in protective clothing, in dusty interior work, or for those working in greenhouses or gardening.

• Safety and consumables

Blocks strong summer sunlight and cuts UV by 99.9%. A hands-free parasol that can be used without holding.

Blocks strong summer sunlight and cuts UV by 99.9%. Moreover, since it can be worn on the back, it is a hands-free parasol that keeps your hands free. It can block the intense summer sunlight that is difficult to avoid when using both hands for tasks, cutting UV by 99.9%. The ultraviolet protection factor (UPF) is also at the highest rating of 50+, protecting you from UV rays, and it creates shade, making it easier to see the screens of tablets and smartphones. The hands-free, wearable parasol provides solid support for those working outdoors in the summer.

• others

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html