PERI products are used at construction sites around the world. (Taiwan, New Taipei City (Tamsui District): Tamkang Bridge)

A stable and flexible scaffold bracket system for one-sided and two-sided climbing formwork operations.

The "PERI SCS Climbing System" Single-Sided is a climbing-type bracket system primarily used for one-sided construction, meaning it is used in situations where separators are not employed. Common applications include dams, sluice gates, cooling towers, bunkers, main towers, tunnels, and liquid-tight embankments. The brackets are also suitable for forming fixed wall formwork. Additionally, by adding minimal components, it can also accommodate two-sided construction. In the SCS Climbing System, two bracket units and one wall formwork section are integrated to form a crane-movable platform (climbing unit). The components that make up the climbing unit are designed according to a modular concept. By maximizing the use of common components, multiple climbing units can be constructed. *For more details, please refer to the PDF materials or feel free to contact us.*

• Formwork material

Construction kit system for various works requiring self-elevating technology.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

PERI GT 24 (formwork beam material) provides high load-bearing capacity and rigidity.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, including the ability to be nailed. Additionally, the use of the "ST system" improves workability by eliminating the warping issues found in steel beams at the beam support points. Features of the PERI GT24 Girder (formwork beam material): ■ Maintains high precision over long periods ■ Lightweight at 5.9 kg/m, making it easy to handle ■ Formed from strong chord materials ■ Can be constructed with screws and nails due to being made of wood ■ High bending strength allows for work over large spans ■ Main materials are fixed with double tail joints at the connections of each truss beam *For more details, please feel free to contact us.

• Formwork material

Publication about the large wall formwork system using the PERI truss beam GT24!

This catalog features the "VARIO GT24" handled by PERI Japan Co., Ltd. The "VARIO GT24" is a truss beam wall formwork system that uses adjustable slot fittings. By using it, it is possible to accurately assemble dimension panels tailored to each project. "VARIO means... versatility." It is utilized on sites that require large formwork, such as bridge pier construction, retaining wall construction, and LNG containment embankments! Please take a moment to read the catalog. [Contents (partial)] ■ Truss beam panel formwork VARIO GT24 / TRIO ■ Truss beam wall formwork system (VARIO GT24) ■ Supports complex structural shapes with standard system components ■ PERI truss beam GT24 ■ Standard system components for VARIO GT24 panels *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material

Perry Japan Co., Ltd. introduces CNC machines to manufacture custom molds.

CNC machines have been introduced at the Ibaraki stockyard. Perry's skilled formwork manufacturing team produces plywood panels and special formwork cut to size to meet all project requirements. This includes custom work platforms, box outs, or 3D formwork units in any shape or size. They are shipped fully prepared, allowing for immediate assembly upon delivery to the construction site. Based on planning considerations by engineers, we can produce and supply formwork that can be combined with our system formwork or used as part of conventional construction methods to meet various requirements. Our strength lies in providing a seamless service from planning to assembly manufacturing and logistics services. (Achievements) As of May 2024, custom formwork manufactured at our Ibaraki stockyard, along with Perry products, is being used in the construction of the main pylon of the Tamkang Bridge in Tamsui District, New Taipei City, Taiwan. *For more details, please feel free to contact us.

• Formwork material

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.