【Product News】PERI formwork beam material 'PERI GT24 Girder' offers high load-bearing capacity and rigidity!

PERI GT 24 (formwork beam material) provides high load-bearing capacity and rigidity.

The "PERI GT 24 (formwork beam material)" has resolved the issue of material stability, which was the only drawback of wood, by constructing trusses using laminated timber. It maintains high precision without deformation over long periods and retains the advantages of wood, including the ability to be nailed. Additionally, the use of the "ST system" improves workability by eliminating the warping issues found in steel beams at the beam support points. Features of the PERI GT24 Girder (formwork beam material): ■ Maintains high precision over long periods ■ Lightweight at 5.9 kg/m, making it easy to handle ■ Formed from strong chord materials ■ Can be constructed with screws and nails due to being made of wood ■ High bending strength allows for work over large spans ■ Main materials are fixed with double tail joints at the connections of each truss beam *For more details, please feel free to contact us.

• Formwork material

High durability, efficient, lightweight for effective transportation and storage! Easy replacement of nail strip materials.

The "PERI AB 20C" is a highly durable and efficient lightweight aluminum beam. Nailing is possible by inserting strip materials (plastic/plywood) into the top edge. It is weather-resistant, unaffected by pests, lightweight, and easy to recycle. Strip materials can be easily replaced for nailing. There is a wide range of components available for fixing this product to each other, as well as for securing the aluminum beam "AB 20C" to steel wales, including the fixing component "Universal Clamp Aluminum Beam" and hook straps "HB VT-AB." 【Features】 ■ Weather-resistant ■ Unaffected by pests ■ Lightweight ■ High residual value ■ Efficient transportation and storage *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material

Exhibition of system formwork born in Germany! What is system formwork? I want to see the actual system formwork! Please feel free to contact us for more information!

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

• Systems Architecture

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with a single unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for extensive detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Thank you very much for using our services. We have added a new service site. https://fusions.jp/fus-lp This is an introduction to the following services that will assist in sales and recruitment activities. * Sales... "Automatic sending of business negotiations to salespeople" * HR... "Elimination of miscellaneous tasks for the recruitment team" ⭕️ We are currently offering a free case study collection that you can implement in your own company with a 2-minute survey!