We will exhibit at ROBOT TECHNOLOGY JAPAN 2024 [Conbam Booth: C39].

The suction that we had given up on for that bag work is now possible!

The "SGR Series" makes it possible to suction "large-deformation bag-shaped workpieces," which have been difficult to handle until now! 【Features】 ■ Suction and transport of bag-shaped workpieces that could not be grasped before ■ Compact size, ideal for "boxing," "removal," and "unpacking" of bagged items! ■ Made with water-resistant and hydrolysis-resistant EPDM sponge ■ Support pads prevent suction marks and remove foreign objects ■ Easily attachable to devices with a robot flange! Suction example video ► Coming soon ----------------------------------------------------------------------------------------------------- 【Convum Online Shop OPEN!】 →http://shop.convum.co.jp/ 【<ΘΘ> Newsletter "Convum Communication" now being distributed!】 In Convum Communication, we provide new product information and the latest updates to newsletter subscribers faster than any other SNS! We look forward to your registration! →https://convum.co.jp/inquiry/

• Palletizing System

Ideal for vacuum suction of various shapes and sizes! Just supply compressed air to the inlet port!

The "SGB Series" is a new type of hand that can suction and transport workpieces that could not be grasped before. Thanks to the built-in combum (vacuum ejector), it operates easily by simply supplying compressed air to the inlet port. It efficiently utilizes the exhaust generated during the vacuum creation of the combum. 【Features】 ■ Suction and transport of workpieces that could not be grasped before ■ Built-in combum (vacuum ejector) ■ Easy operation by simply supplying compressed air to the inlet port ■ Introduces the exhaust air from the combum into the rubber membrane, causing it to expand like a balloon ■ Efficiently utilizes the exhaust generated during the vacuum creation of the combum *For more details, please refer to the PDF document or feel free to contact us.

• others

Energy-saving with a power consumption of 4W! Can be used for collaborative and cooperative robots that can carry 0.5 to 3 kg.

The "SGE Series" is a product that eliminates the need for air piping to the compressor by incorporating a built-in small vacuum pump. It has been made compact and lightweight to be used with collaborative robots that can carry between 0.5 to 3 kg. The main body weighs 260g. We offer a flange that can be directly attached to small collaborative robots. 【Features】 ■ Airless operation ■ Energy-saving ■ Compatible with small robots ■ Compact and lightweight *For more details, please refer to the PDF document or feel free to contact us.

• others

A suction flow rate comparable to a vacuum pump! Maximum suction flow rate of 877L/min for the Convum!

The "CVZ Series" is a convum with a high suction flow rate comparable to that of a vacuum pump, with a maximum suction flow rate of 877L/min. It is suitable for breathable workpieces, heavy object adhesion, and large-capacity degassing. 【Features】 ■ High suction flow rate comparable to that of a vacuum pump ■ Equipped with a three-stage multi-flow vacuum nozzle ■ Option to select the number of nozzles, and energy-saving by choosing the shared pressure specification of 0.3MPa ■ Large filter removes dust and foreign objects! ■ Pressure sensor can be directly mounted on the main body! ----------------------------------------------------------------------------------------------------- 【Convum Online Shop OPEN!】 →http://shop.convum.co.jp/ 【<ΘΘ> Newsletter "Convum Communication" is being distributed!】 In Convum Communication, we deliver new product information and the latest updates faster than any other SNS exclusively to newsletter subscribers! We look forward to your registration! →https://convum.co.jp/inquiry/ (See details)

• Garbage disposal, central dust collection, laundry, compressor

Directly attachable to robots, no hand design required! A catalog featuring examples of kit combinations is currently being offered!

The Convum robot hand kit "CRKT Series" is an integrated robot hand that eliminates the need for complicated hand design and can be directly attached to robots. In the catalog, we are currently featuring assembly tree diagrams by type and combination drawings of the kits. 【Contents Included】 ■ FI/FH/FE Type Assembly Tree Diagram ■ FX Type Assembly Tree Diagram ■ KDP Type Assembly Tree Diagram ■ Kit Combination Drawings ■ List of Compatible Robots, etc. ----------------------------------------------------------------------------------------------------- 【Convum Online Shop OPEN!】 →http://shop.convum.co.jp/ 【<ΘΘ> Newsletter "Convum Communication" Now Available!】 In Convum Communication, we deliver new product information and the latest updates faster than any other SNS exclusively to our newsletter subscribers! We look forward to your registration! →https://convum.co.jp/inquiry/

• others

We will be exhibiting at the "Financial International Information Technology Exhibition" FIT Osaka 2026, which will be held at Grand Front Osaka on September 3 (Thursday) and September 4 (Friday). We will introduce the features of our human resources information system "Fellowship," which includes various functions useful for HR department operations, such as personnel management, payroll, and employment.

Our company will invite professors who are active at the forefront of university research to hold a web technology course in the construction field. This time, as a follow-up to "The Effects and Design Considerations of Shield Tunnels in Proximity and Adjacent Situations - Part 1," which was published in July, we will have a lecture by Professor Noriyuki Horiuchi from Kokushikan University. In "Part 1," we explained the phenomena of the effects caused by proximity and adjacent shield tunnels, using examples of left-right adjacency and passing beneath existing tunnels, as well as the basic concepts of numerical evaluation. In "Part 2," we will focus on the vertical adjacency of large-section shields. We will introduce analytical methods for numerically evaluating the impact on existing tunnels, surrounding ground, and existing underground structures, using actual site measurement data and FEM sequential excavation analysis, specifically in cases where large-section shields are constructed above or below existing tunnels. We will also discuss methods for predictive analysis, design, and construction considerations. This course will be beneficial for those studying for the "Professional Engineer Examination," so please take this opportunity to participate. Additionally, this course is a CPD accredited program by the Japan Society of Civil Engineers (planned), and you can also participate as part of engineer education. We sincerely look forward to your participation.

In this webinar, we will clearly explain effective operational methods based on media characteristics, timing for posting, and points for improvement after publication. It is not only important to "collect applications" in recruitment. To prevent mismatches and early turnover after hiring, it is crucial to review the entire recruitment process, including how job information is conveyed and what to confirm during the selection process. Therefore, we will also introduce how to design the recruitment process to prevent discrepancies in understanding with job seekers and to enhance retention rates. Additionally, in small and medium-sized enterprises with few recruitment personnel, the workload involved in creating job postings, responding to applicants, and measuring effectiveness can become a significant burden. We will also explain how to systematize and streamline media operations to make recruitment tasks more efficient, allowing continuous recruitment activities even with limited personnel. Finally, based on the content introduced this time, we will organize and convey specific improvement actions that can be implemented starting tomorrow. Even companies that find it difficult to increase their recruitment budget may have the potential to enhance recruitment outcomes by reviewing their choice of job media, job postings, operational methods, and recruitment processes.

Our company will be exhibiting at the on-site DX EXPO【Autumn】held at Makuhari Messe, in collaboration with Japan Comsys Corporation, TOSYS Corporation, NDS Corporation, and Tomei Communication Industry Corporation, as part of the Comsys Group. This exhibition is held within the "Japan DX & AX Week" and is a specialized exhibition where the latest solutions supporting digital transformation (DX) such as image processing AI, remote monitoring, and robotics gather for those working in various fields such as construction sites and factories. We will also be introducing various AI-powered solutions from our company. Exhibited Products: - Collaborative solutions from various companies (AIJO Site Monitor 'Bear Detection Solution') - AI rebar shape measurement system 'AIJO Rebar King -AIJO HiKing-' - AI monitoring solution 'AIJO Site Monitor' - Safety gear inspection before work 'AIJO Safety' - Product appearance inspection solution for manufacturing industry 'AIJO Check AItem' - Automated drone inspection service for solar power plants 'AIJO Check Solar' and more.

JMP is software that not only excels in statistical analysis and graph creation but also has robust features for experimental design. By utilizing experimental design, efficient data collection can be achieved while minimizing time and costs. In this seminar, we will focus on the features of experimental design, specifically the sample size explorer and Bayesian optimization, and demonstrate examples of their application in the manufacturing industry. 【Overview】 First half: Utilization of t-tests in the manufacturing industry and simulation of required data numbers We will explain the overview and examples of t-tests, which are used for various purposes in the manufacturing industry, and present analysis examples using JMP. Additionally, we will introduce a method to simulate the relationship between the required data numbers for t-tests and statistical power using the sample size explorer. Second half: How to utilize JMP Pro Bayesian optimization – Application to simulation experimental data The Bayesian optimization platform is originally designed for experimental data that includes measurement errors, but there is also a strong demand to apply it to simulation experimental data that does not contain errors, such as CAE. In this seminar, we will introduce approaches for utilizing Bayesian optimization with simulation experimental data.