For areas troubled by water, such as leaks and condensation! Here is information about reusable absorbent mats.

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

Measures against flooding damage caused by typhoons and heavy rain! Uses superabsorbent polymer *Video explanation available.

● It is a water-absorbing, inflatable, bag-shaped simple dam. ● Recommended for flood prevention measures against heavy rain and typhoons. ● Before absorbing water, it is lightweight and easy to handle, and can be stored compactly. It won't be a nuisance even if kept on hand. ● When in use, fill the container with about 20 liters of water for each Pig Water Bag, and knead it by hand while allowing it to absorb water. It will inflate in about 5 minutes. ● The Pig Water Bags can be stacked up to three layers. ● If unopened, the shelf life is approximately 5 years. *Currently, we are offering a document summarizing recent trends in flood damage.

• Disaster prevention supplies

The most common workplace accident in the country is slipping and falling! The causes vary, including dust and liquids. Solve the problem with Plastex Lok, which is resistant to both dust and liquids!

In 2020, the most common type of injury accident reported by the Ministry of Health, Labour and Welfare was falls. Approximately 30,000 workers are affected each year, which translates to about 86 injured or deceased individuals per day. Plastex Lok features countless protrusions processed to be slip-resistant on the surface, helping to prevent falls for workers. Additionally, its high drainage performance and interlocking tile mat design allow for easy installation and flexible layout changes. ■ Recommended sites - Areas where large amounts of liquids or dust spill - Workstations, assembly lines, laboratories, engine manufacturing, thin plate processing

• Other commercial buildings and service facilities
• Reinforcement and repair materials
• Paving Materials

A mat that helps prevent slipping and falling by absorbing dirt from shoe soles and moisture from snow and rain. The back is coated with a water-resistant adhesive, so the mat won't slip!

Features of the "Piggrippy Floor Mat" ■ Liquid-proof Issue: Risk of slipping and falling due to liquid on the floor Solution: The liquid on the mat is securely retained inside the mat! ■ No tape required for fixation Issue: It's troublesome to secure the mat with tape to prevent it from shifting Solution: The back of the mat is made of adhesive material. It can be fixed without tape! ■ Minimal adhesive residue on the back, allowing for reapplication Issue: It's difficult to remove adhesive residue from the floor when tape is used Solution: The back of the mat uses low-residue adhesive material. It can be reapplied! ■ Washable mat due to non-water-soluble adhesive Issue: The mat peels off when cleaning the floor while it's laid down Solution: The back of the mat uses water-resistant adhesive material. The mat won't peel off even if water splashes during floor cleaning! ■ Easy installation with separately sold installation board and safety cutter Convenient installation board for cutting the mat to your preferred size and a safety cutter designed to prevent cutting accidents are also available for purchase. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• Safety and consumables
• Rain protection items

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

To combat heatstroke during the summer, Sysmet Co., Ltd. has started providing black globe thermometers again this year. Differences from conventional black globe thermometers: - 17-day ahead heat index (WBGT) forecast with a 500m mesh - 1-minute updates of heat index (WBGT) measurements compliant with JIS standards - Email alerts when threshold values are exceeded, along with alarm devices (electronic display boards, rotating lights) and notifications via direct LINE WORKS, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

■ Evaluation Points of the Award-Winning Work "OPELAIII Cx" A rigorous evaluation was conducted by 129 design experts from approximately 10,000 submitted designs from 68 countries and regions around the world. Our "OPELAIII Cx" received high praise in the following three pillars, leading to its award. Innovative Innovation: A new approach that is not bound by existing concepts has realized the [wearable shadowless lamp]. Thorough Usability: Based on a comprehensive user perspective, we pursued intuitive and stress-free excellent operability. Design Pursuing Ergonomics: From material selection to the details of product design, we prioritized the health and comfort of doctors around the world who work in harsh environments. We thoroughly implement ergonomics to reduce physical strain and maximize performance. Details of the award-winning work are published on the official iF design portal site at https://ifdesign.com/en/winner-ranking/project/opelaiii-cx/739885.

This product is a light source device utilized in a wide range of processes such as curing, surface treatment, sterilization, analysis, and material evaluation using ultraviolet (UV) light. With stable light output and an easy-to-handle design, it can be widely used from manufacturing sites to research and development fields. Depending on the application, you can select the type and output of the lamp, ensuring stable processing quality. Main UV lamp light source products: 1. Excimer light source Covers special wavelength ranges that cannot be achieved with LEDs, making it ideal for research and evaluation applications requiring specific wavelengths, such as semiconductor and material evaluation, surface modification, and photochemical reactions. 2. Low-pressure mercury lamp light source Emits high-energy short-wavelength UV, used in various fields such as sterilization, surface cleaning, resin pretreatment, analytical devices, and environmental measurement instruments. 3. High-pressure mercury lamp and metal halide lamp light source (for UV curing devices) Compatible with resins that are difficult to cure with LEDs, it plays a significant role in the adhesion, printing, and coating processes of UV-curable resins, as well as in the manufacturing of electronic components and the curing processes of optical materials. It also supports selection tests for light sources and filters, proposing optimal irradiation conditions tailored to resin characteristics. Custom specifications are also available. Please feel free to consult us regarding irradiation range and required functions.