Here is information about a reusable absorbent mat for places troubled by water, such as leaks and condensation!

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

Measures against flooding damage caused by typhoons and heavy rain! Uses superabsorbent polymer *Video explanation available.

● It is a water-absorbing, inflatable, bag-shaped simple dam. ● Recommended for flood prevention measures against heavy rain and typhoons. ● Before absorbing water, it is lightweight and easy to handle, and can be stored compactly. It won't be a nuisance even if kept on hand. ● When in use, fill the container with about 20 liters of water for each Pig Water Bag, and knead it by hand while allowing it to absorb water. It will inflate in about 5 minutes. ● The Pig Water Bags can be stacked up to three layers. ● If unopened, the shelf life is approximately 5 years. *Currently, we are offering a document summarizing recent trends in flood damage.

• Disaster prevention supplies

The most common workplace accident in the country is slipping and falling! The causes vary, including dust and liquids. Solve the problem with Plastex Lok, which is resistant to both dust and liquids!

In 2020, the most common type of injury accident reported by the Ministry of Health, Labour and Welfare was falls. Approximately 30,000 workers are affected each year, which translates to about 86 injured or deceased individuals per day. Plastex Lok features countless protrusions processed to be slip-resistant on the surface, helping to prevent falls for workers. Additionally, its high drainage performance and interlocking tile mat design allow for easy installation and flexible layout changes. ■ Recommended sites - Areas where large amounts of liquids or dust spill - Workstations, assembly lines, laboratories, engine manufacturing, thin plate processing

• Other commercial buildings and service facilities
• Reinforcement and repair materials
• Paving Materials

A mat that helps prevent slipping and falling by absorbing dirt from shoe soles and moisture from snow and rain. The back is coated with a water-resistant adhesive, so the mat won't slip!

Features of the "Piggrippy Floor Mat" ■ Liquid-proof Issue: Risk of slipping and falling due to liquid on the floor Solution: The liquid on the mat is securely retained inside the mat! ■ No tape required for fixation Issue: It's troublesome to secure the mat with tape to prevent it from shifting Solution: The back of the mat is made of adhesive material. It can be fixed without tape! ■ Minimal adhesive residue on the back, allowing for reapplication Issue: It's difficult to remove adhesive residue from the floor when tape is used Solution: The back of the mat uses low-residue adhesive material. It can be reapplied! ■ Washable mat due to non-water-soluble adhesive Issue: The mat peels off when cleaning the floor while it's laid down Solution: The back of the mat uses water-resistant adhesive material. The mat won't peel off even if water splashes during floor cleaning! ■ Easy installation with separately sold installation board and safety cutter Convenient installation board for cutting the mat to your preferred size and a safety cutter designed to prevent cutting accidents are also available for purchase. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• Safety and consumables
• Rain protection items

Details of the FaceMe Security 8.3 Update < Revamped UX for Action & Alert Rule Settings > Previously, individual settings were required for each action even within the same rule. By completely overhauling the UI and UX, we have transformed the operation screen to allow for intuitive and efficient configuration. ▶ Key Update Points - Multiple actions (notifications, access control, VMS integration, etc.) can now be set within a single rule. - The settings screen has been consolidated into a single page, allowing for an overview and editing of the entire configuration at a glance. < Enhanced Integration Features with Face Terminal (Facial Recognition Terminal) > FaceMe Security integrates with the MSK Knoctoi series (Standard/Lite), enabling door opening and closing based on facial recognition results without the need for additional devices. This update allows for detailed configuration of door opening and closing rules based on location, time of day, and groups of individuals, enabling more flexible access management tailored to on-site operations. ▶ Expected Implementation Scenarios - All employees can enter the entrance, while only administrators can enter specific areas at night, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

NTT TechnoCross Corporation (Headquarters: Minato-ku, Tokyo, President: Atsuko Oka, hereinafter referred to as "NTT TechnoCross") announced that its health management system "HM-neo" achieved a market share of 18.4% among major companies with 3,000 or more employees in the health management solutions market, according to a survey conducted by Deloitte Tohmatsu Economic Research Institute, Inc. (Headquarters: Chiyoda-ku, Tokyo, President: Shigeo Watanabe) for the fiscal year 2024, securing the No. 1 share.

At a cabaret club located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser "MajestaFragrance." Different scents are created for the floor and the VIP room. After the introduction, we have received feedback from customers saying things like "It's calming" and "It has created an elegant atmosphere." MajestaFragrance not only delivers fragrance but also enhances the overall value of the space. If you are interested in scent design, please feel free to contact us.