▼▲▼▲▼▼▲▼▲▼★Maika News★ Sliding properties (friction material) [NAO material] is widely used as a substitute for asbestos★ Repco News★▼▲▼▲▼▼▲▼▲▼

General grade with high purity and high aspect ratio. Phlogopite, derived from the Greek word "phlogopos," meaning "like a flame."

The "Repkomica S Series" is a product made from naturally occurring mica that has been refined and crushed at a domestic factory. It maximizes the high elasticity inherent in mica through manufacturing techniques developed over many years, resulting in a high aspect ratio (average particle size/thickness), which is a key feature of flake fillers. When incorporated into industrial materials such as plastics, paints, and rubber, it is expected to impart various functionalities centered around rigidity, dimensional stability, and heat resistance. 【Features】 ■ Long-term supply stability due to abundant reserves ■ Quality stability through domestic production system ■ No crystalline silica detected (detection level: below quantification limit) ■ Various grades available based on average particle size ■ Flexible response to custom grade orders and surface treatments ■ Short delivery times supported by domestic bases Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• Coating film waterproofing material/permeable waterproofing material
• Anti-rot, anti-termite, anti-mold material
• Exterior coating materials

Demonstrates high cost performance! Easily applicable to products that require high whiteness and colorability.

The "Repkomica M Series" is a product made from naturally occurring muscovite that has been refined and crushed at a domestic factory. It has a high whiteness and can be easily incorporated into products that require coloring. Additionally, it excels in insulation resistance, making it particularly high-performing in applications such as electronic components. When filled into industrial materials like plastics, paints, and rubber, it is expected to improve and impart properties such as rigidity, dimensional stability, and heat resistance. 【Features】 ■ High whiteness and easy incorporation into products requiring coloring ■ Excellent insulation resistance ■ Particularly high performance in applications such as electronic components ■ Expected to improve and impart properties such as rigidity, dimensional stability, and heat resistance ■ Flexible response to surface treatment and custom grade production ■ Short delivery times supported by domestic facilities

• Coating film waterproofing material/permeable waterproofing material
• Anti-rot, anti-termite, anti-mold material
• Exterior coating materials

◆ Developing a stable supply system centered around our domestic factories ◆ High cost-performance due to processing raw materials with dry grinding! ◆ Custom-made products are also available

"Mica" is a mineral classified as a silicate aluminum compound. The mica products we handle are high-purity, high-quality, high-aspect-ratio flaky powders, and we have established a stable supply system centered around our domestic factories. We offer a wide range of grades with average particle sizes from a few micrometers to several hundred micrometers, allowing for flexible responses tailored to our customers' applications and requests. Additionally, since we mainly process raw materials for dry grinding, we achieve high cost performance. 【Features】 ■ A mineral classified as a silicate aluminum compound ■ Harmless to the human body and eco-friendly ■ High-purity, high-quality, high-aspect-ratio flaky powders ■ A stable supply system centered around our domestic factories ■ Flexible responses tailored to customers' applications and requests Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• Solid wood flooring/outdoor
• cement
• Paving Materials

Mica is used as NAO material for brake pads! Since 1990, mica has been used as a filler to replace asbestos.

Slipperiness (sliding property) Enhances the sliding characteristics of molded products and smoothens the surface. Mica is mainly used as the NAO (Non-Asbestos Organic) material for brake pads. Since the discontinuation of asbestos in 1990, mica has been the filler that has been switched to. With mica's unique moderate friction effect, it can prevent squeaking, reduce slipping, and eliminate abnormal noises. Repco mica is also used primarily in friction materials, as well as in rubber, mold release agents, and adhesives. For more detailed information, feel free to download. 　　　　　　　　　↓↓↓↓↓↓↓

• Anti-rot, anti-termite, anti-mold material
• Coating film waterproofing material/permeable waterproofing material
• Exterior coating materials

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI