School Gate Security Feature - Protecting Lives with the "Outdoor Gate Electric Lock System"

Waterproof small electromagnetic lock, standard product of electromagnetic electric locks / Rated voltage: DC12/24V compatible, holding force: 200Kg

◯ Product Features - A compact waterproof electromagnetic electric lock with a holding force of 200 kg, suitable for installation both indoors and outdoors. - Mounting screw holes are provided on the front and side, allowing installation from either the front or side. - A variety of mounting brackets are available for installation on various types of doors, including outdoor gates, sliding doors, and hinged doors. - Built-in locking signal (LSS) and door closed signal (DSS) allow for contact output of locking/unlocking status and door open/close status. - Locking signal/door closed signal is provided on both sides, enabling a wider detection range for the signals.

• Door and window locks
• Entrance/exit management and personal identification system
• Other security systems

Of course, it can be installed on both new and existing doors! For customers considering an electromagnetic electric lock system.

The "LC-4500DLSS" is our original electromagnetic electric lock that controls locking through the ON/OFF of the power supply. It locks by adhesion between surfaces. Compared to deadbolt types, it has a structure that is less prone to operational failures due to door warping. Additionally, since it is surface-mounted, it can be installed not only on new doors but also on various existing doors such as gates, sliding doors, and swinging doors. There is also a waterproof type of electromagnetic lock available, making it suitable for outdoor installation. 【Features】 ■ A locking type that reliably unlocks when powered ■ Locks through adhesion between surfaces, strong against door warping ■ Abundant mounting hardware and excellent workability ■ A safe structure that can be used long-term ■ Achieves system construction at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• Other security systems

Dedicated control panel for VOLCALOCK, equipped with a DC12V/3.5A power supply.

This is a dedicated control panel for the LOCKMAN electromagnetic lock "VOLCALOCK series."

• Door and window locks
• Entrance/exit management and personal identification system
• Other security systems

Waterproof standalone card reader. Suitable for indoor use as well as outdoor installation!

The "ST-120" is a waterproof, outdoor-installable card/PIN-based contactless card reader. The keypad lights up, allowing for safe operation even at night. Additionally, it can register up to 1,000 cards and supports up to 8 different PINs. 【Features】 ■ Waterproof standalone card reader ■ Can be installed both indoors and outdoors ■ Keypad lights up for safe operation at night ■ Equipped with 4 modes ■ Compatible with EM type IC cards, rated voltage is DC12V *For more details, please refer to the PDF document or feel free to contact us.

• Entrance/exit management and personal identification system
• Other security systems

Unlock easily by simply bringing your hand close without touching the button! Non-contact unlocking switch. Ideal for indoor buttons of electric lock systems!

The "SI-68A" is a non-contact unlocking switch used for electric lock systems and similar applications. ◯ Product Features ■ It is a non-contact unlocking switch that can unlock simply by bringing your finger close, outputting a voltage-free contact. ■ It is ideal for use as an unlocking switch for electric locks when exiting from the indoor side, connected to a control panel. ■ The activation status of the unlocking switch can be confirmed with red and green LEDs. ■ The contact output time and sensing distance can be adjusted. ■ The plate features a simple design printed for the electric lock unlocking switch. *Note: This product is a weak contact switch designed to be connected to control panels, etc. It will malfunction if directly connected to devices with high current, such as electric locks. Please be cautious with the connected devices. *For more details, please refer to the PDF materials or feel free to contact us.

• Entrance/Exterior Doors
• others

Waterproof design / Outdoor compatible! A wide range of mounting brackets available! Can be installed on various doors.

The "LC-4500DLSS" is a waterproof electromagnetic electric lock that can be installed both indoors and outdoors, featuring a compact design with a holding force of 200Kg. We offer a variety of mounting brackets suitable for different types of doors, including outdoor gates, sliding doors, and swinging doors. It is capable of outputting signals for locking, door closing, lock/unlock status, and door open/close status. Additionally, it supports a rated voltage of both DC12V and DC24V. The mounting screw holes are located at the front and side, allowing installation from either the front or side. 【5 Reasons】 ■ Built-in double sensor for locking/door closing signals ■ Abundant mounting brackets ■ Compatible with DC12/24V ■ Suitable for outdoor installation ■ Standard model in stock *For more details, please refer to the PDF document or feel free to contact us.

• Security locks (windows, front doors, etc.)

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A system for driver terminals has been realized through API integration, promoting the optimization of the delivery process and improvement of services to customers. Seino Information Service Co., Ltd. and Briskola Co., Ltd. announce that they have adopted Briskola's full lifecycle API management product "BAMs Series" for the construction of a system utilizing APIs and the management of API connections with various business applications for driver terminals, aimed at improving delivery efficiency and achieving digitalization of logistics for Seino Transportation Co., Ltd. and transportation groups nationwide. By implementing Briskola's "BAMs Series" for API management in the delivery management system constructed through API integration, we will focus on responding to the expected increase in the number of API calls due to the anticipated increase in terminal numbers, as well as ensuring stable system operation and preventive detection. This will lead to improved operational efficiency for drivers and the provision of high-quality services to customers sending and receiving packages.

In this case study, we have received cooperation from Obayashi Corporation and Sankyu Inc., leaders at the forefront of the construction and logistics industries, to introduce their specific initiatives regarding "early detection of heatstroke risk" and "ensuring worker safety." Additionally, we have published an interview article with Obayashi Corporation, who contributed to the development of "GenVital LTE," as a "development story." As heatstroke risk has become a social issue, we encourage everyone in companies working on improving on-site productivity and safety measures for workers to read this for insights. GRIFFY will continue to contribute to creating safer and more comfortable working environments through DX solutions, including "GenVital LTE." ◾️ Obayashi Corporation (case study) ◾️ Sankyu Inc. (case study) ◾️ Obayashi Corporation (development story) *Please check the link for more details on the article.

We conducted an RTK accuracy verification of the GNSS reference station (Hi-Target Vnet6plus receiver + choke ring antenna) installed at our company building. Generally, with a single-frequency GNSS, once the baseline length exceeds 10 km, it becomes impossible to consider the path through the ionosphere as the same, and the difference in ionospheric delay becomes a significant source of error. By using dual-frequency GNSS, it is possible to correct the delay based on the differences in delay caused by the frequency of the radio waves; however, it is still said to be effective only up to about 10 km. Why is that? We have published the verification results on our blog.