We will exhibit at the 28th R&R Architecture Regeneration Exhibition 2024 from June 12 to 14, 2024.

[Presenting a Collection of Basic Knowledge on Film Thickness Gauges] Automatically recognizes the measurement substrate metal with a dedicated probe! It is possible to select connecting probes tailored to measurement applications such as for heat resistance.

The "SWT-NEO Series" from Sanko Electronic Research Institute is a thickness gauge that can be used for insulating coatings such as painting, lining, plating, and anodizing. Depending on the measurement application, you can choose between probes for ferrous substrates, non-ferrous metal substrates, or a connection probe that works for both ferrous and non-ferrous substrates. The slim body design reduces fatigue during handheld operations. The easy-to-understand guide display screen makes operation simple. 【Features】 ■ Automatic recognition of the measurement substrate metal through a dedicated probe ■ Built-in statistical functions ■ Easy-to-understand guide display screen ■ Upper and lower limit functions ■ Slim body design ☆ A "Thickness Gauge Basic Knowledge Q&A Collection" is currently being offered. * For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Revolution in Film Thickness Measurement: Utilizing Advanced Photothermal Radiation Method

The "Coat Master Flex" can measure film thickness in an uncured state without being affected by materials or surfaces such as metal, resin, wood, CFRP, and ceramics! It enables a wide range of measurements, including on-site coating measurements and inline measurements. 【Features】 ■ Non-contact measurement of coating thickness in both wet and dry states ■ Compatible with curved surfaces, corners, and edges ■ Real-time measurement possible even during the operation of the painting line ■ Significantly reduces construction time, avoiding rework and rejection ■ Immediate verification after application, potentially reducing material consumption by up to 30% ■ Measurement time per location is just a few seconds, with a measurement area of φ1 to 50 mm ■ Distance to the measurement target is 2 to 15 cm, with an irradiation angle of ±35° (no need for a right angle of 90°) ■ Weighs approximately 1.5 kg, lightweight and compact, making it ideal for on-site work *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Portable probe-integrated thickness gauge

Portable probe-integrated dual-type thickness gauge Automatically identifies and measures base metals Can measure in dark places with backlight FN type is single-function, Pro type is high-function Pro type features measurement value and calibration curve memory function, data transfer to PC - Measurement method: Electromagnetic and eddy current dual-use - Measurement range: 0–900μm to 2.5mm (ferrous base) 2.0mm (non-ferrous metal base) - Measurement accuracy: ±1μm or ±3% - Display method: LCD digital - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional function: Switchable display of 0.1μm (for measurements under 100μm)

• Other measuring instruments

Probe-integrated model for iron base only

This is a pocket-sized digital thickness gauge with an integrated probe and main unit. Zero and standard adjustments are easily done with a one-touch button. Its lightweight, palm-sized body and simple key layout allow for easy one-handed operation. - Measurement method: Electromagnetic induction - Measurement range: 0 to 999μm to 2.5mm - Measurement accuracy: 0 to 100μm; ±1μm or ±2% of the indicated value 101 to 2.5mm ±2% of the indicated value - Display method: LCD, display hold - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional features: Backlight switch, auto power-off switch, range switch for 0.1μm display (for less than 100μm)

• Other measuring instruments

Introducing a low-frequency high-voltage pulse discharge pinhole detector.

We would like to introduce the pinhole detectors handled by Sanko Electronic Research Institute: the 'TRC-250A/250B and TRC-70A/70B'. The "TRC-250A/250B" has a detection voltage of 5 to 25 kV (peak value) and is suitable for coating thicknesses of 1 mm or more. On the other hand, the "TRC-70A/70B" has a detection voltage of 1 to 7 kV (peak value) and is suitable for coating thicknesses of 1 mm or less. 【Specifications (excerpt)】 <TRC-250A/250B> ■ Method: Low-frequency high-voltage pulse discharge type ■ Detection voltage: 5 to 25 kV (peak value) ■ Power supply: Built-in NiMH (nickel-metal hydride) battery (with battery check function) ■ Charging power supply: AC 100-240V, 50/60Hz, 30-20VA ■ Target coating thickness: 1 mm or more ■ Dimensions: 370(W) × 190(H) × 150(D) mm ■ Main unit weight: 4.9 kg *For more details, please refer to the PDF document or feel free to contact us.

• others

Basic type of moisture measurement! Flexibly accommodates various moisture measurements with different connected probes.

The "MR-200II" is a compact body electric moisture meter. With the upper and lower limit functions, it allows for easy checking of dryness and moisture levels. It features a large LCD display that is easy to read on a compact body. It flexibly accommodates various moisture measurements depending on the connected probe. The "standard probe" used with the MR-200II is available for purchase separately. 【Features】 ■ Flexibly accommodates various moisture measurements depending on the connected probe ■ Large LCD display that is easy to read on a compact body ■ Easy checking of dryness and moisture levels with upper and lower limit functions *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Display the quantity of "appearance" quantitatively.

A compact and durable gloss meter designed with ergonomics in mind. Easy-to-use operation achieves high repeatability and reproducibility.

• Other measuring instruments

2025 Drainage Treatment Course We are offering three courses online: Basic Law, Basic Management, and Knowledge Enhancement! This year, the courses are scheduled for May, July, September, November, and January 2025. Applications are currently being accepted. We look forward to your application.

The 34th Environmental Forum will be held on Thursday, June 5, 2025. The Environmental Forum is an event organized by our company in June, which is Environment Month, to encourage many people to think about environmental issues. [Content] Coastal areas that have increased biological productivity and biodiversity due to human involvement are referred to as "satoumi" (satoumi means "sea of the village"). In Part 1, we will introduce what satoumi creation is and how it is developed, using real examples. Additionally, various conservation activities for biodiversity are being carried out in different forms, starting with satoumi creation. In Part 2, we will discuss the current status and future prospects of biodiversity conservation, starting from satoumi. Participation is free of charge. [How to Participate] ZOOM Webinar or Wink Aichi (venue) [Program] 13:30 Opening Remarks 13:45 Part 1: Creating Satoumi Aiming for Coexistence of "People" and "Nature" 14:45 Break 15:00 Part 2: The "Present" and "Future" of Biodiversity 16:00 Part 3: Q&A Session 16:30 Closing Remarks

We are pleased to announce the archive distribution of our seminar titled "Easily Create User-Friendly Manuals for Both People and Generative AI with StockNaut." We will provide a clear explanation of the kintone plugin "StockNaut," which allows you to write text while pasting multiple images into a multi-line text field. The "Markdown syntax" adopted by StockNaut enables the creation of text that is easy for both people and generative AI to read. By combining generative AI, you can experience the benefits of StockNaut at 120%! If you are having trouble with document creation, including manuals, we look forward to your participation. 【Timetable】 - Introduction to StockNaut - Introduction of internal use cases at FCS - Demonstration of the combined use of StockNaut and generative AI - Q&A session We look forward to your applications.

Silex will exhibit at the "Embedded Edge IoT Development EXPO [Spring]" held at Tokyo Big Sight from April 8 (Wednesday) to April 10 (Friday), 2026, showcasing next-generation wireless and edge AI solutions that integrate our long-developed connectivity technology with the latest edge AI, under the theme of "Uninterrupted Wireless + Edge AI Technology."

Nitto Kohki will exhibit at the "Data Center EXPO" held at Makuhari Messe Hall 1 from Wednesday, October 23 to Friday, October 25. [Booth Number: A6-23] At this exhibition, we will showcase the "Compact Zero Spill Coupler," which is specifically designed for data centers, including supercomputers. We will also present the "Blind Mate Type," a fitting exclusively for server cooling piping, as a reference exhibit.