CSPI2024 Construction and Surveying Productivity Improvement Exhibition - Exhibition Participation

This ultra-compact DVL plays a significant role in underwater autonomous navigation, station-keeping, and position information acquisition for small ROVs/AUVs/underwater drones!

Ideal for those looking for small Doppler velocity logs, ground and water speedometers, underwater sensors, etc. → Want to automate ROVs (for those considering inspections of offshore structures, etc.) → Want to achieve underwater positioning for ROVs and accurately grasp underwater location information! → Want to maintain a certain distance from the seabed, dam walls, underwater structures, etc. → Considering the effective use of a Doppler velocity log (DVL) for installation, but... - Limited installation space - Wiring and calibration work with DVL and attitude control sensors is cumbersome. - Want to measure both ground speed and water speed. - Want to accurately grasp attitude using AHRS. - Want environmental data (water temperature, current direction and speed meter (ADCP function), pressure). - Want a simple and accurate small DVL unit! - (Also want to keep costs down if possible...) < This is convenient! Vehicle-mounted support features > - For Python - For BlueOS (for BlueROV2) - For ROS2 (Robot Operating System 2) Dedicated drivers are available. Released in 2022! Increasing domestic installation achievements! INS function license to be added from 2024!

• Work boats, research vessels, underwater work machines

What if waves and currents could be measured simultaneously at an offshore wind power site? Do you have concerns like this?

The Signature series is an ultrasonic current meter (ADCP) that can simultaneously perform direct measurements of sea surface elevation, measure circular motion current velocity below the sea surface, and obtain current velocity profiles. Using time series analysis and spectral calculations on the acquired data, it is possible to derive various wave parameters, including wave height and wave direction. For water depths exceeding the measurable range for wave measurement, the device can be mounted on a mid-water float for measurement. (*Nortek patented technology) The maximum water depth for wave observation is 150m, making it suitable for surveys at floating offshore wind power sites exceeding 50m in depth. 【Features】 - Direct measurement of sea surface elevation using ultrasonic technology with vertically arranged transducers - Continuous and simultaneous measurement of waves (sea surface elevation, circular motion current velocity) and current velocity profiles (multi-layer current velocity) (Nortek patented technology) - The measurement position of circular motion current velocity can be changed during post-processing (Signature1000/500) *For more details, please download the PDF or contact us.

• Other measuring instruments

A compact ultrasonic flow direction and velocity meter capable of measuring wave direction (wave direction, wave height) and multi-layer flow direction and velocity. It also allows for real-time computation output for long-term monitoring applications.

AWAC is a wave measurement device that uses ultrasonic Doppler technology, making it ideal for simple wave observation (deriving wave parameters). It is also equipped with traditional multi-layer current velocity measurement functions (ADCP), allowing for the measurement of both waves and current conditions. For more advanced and flexible measurements of waves and current conditions, we recommend the multifunctional ADCP "Signature" series, which includes AWAC's wave measurement capabilities. AWAC emits sound waves from a transducer located at its center towards the sea surface to directly measure the water surface elevation, calculating wave height and its period. By emitting ultrasonic waves from three transducers, it measures the near-surface current velocity (caused by the circular motion of waves) to derive the wave direction spectrum. By using ultrasonic technology to measure the sea surface, accurate wave height and direction measurements can be achieved even from the seabed at depths of up to 100 meters, which is difficult with pressure gauges alone. Utilizing a uniquely developed SUV method, accurate wave measurements can be achieved even when mounted on a mid-water float (patented). By using a mid-water float in areas deeper than 100 meters, wave measurements can be conducted as long as the main device is kept at a depth of 100 meters or shallower.

• River construction
• Coastal construction
• Harbor Construction

A lightweight, compact, and simple-shaped ultrasonic flow direction and velocity profiler. It also features pressure wave measurement (PUV) capabilities, catering to various measurement applications.

The Aquadopp Profiler is a highly versatile ultrasonic Doppler current profiler (ADCP). There are four types in the lineup depending on the measurement range (distance). It is the ideal ADCP for those who want to simply conduct multi-layer current and velocity observations. In particular, it allows for wave measurements using a pressure gauge to be performed between current and velocity measurements, making it a series with high cost performance. The model equipped with the Z-Cell function can emit sound waves horizontally from the sensor head, allowing for the measurement of flow around the instrument. This feature enables the measurement of flow very close to the instrument, which was difficult with conventional ADCPs. The measurement range is from less than 1 m to over 85 m. The measurement range is determined by the acoustic frequency of each model. (Model name: Maximum measurement range) - Aquadopp Profiler 2MHz: 20m - Aquadopp Profiler 1MHz: 25m (including Z-Cell) - Aquadopp Profiler 600kHz: 40m (including Z-Cell) - Aquadopp Profiler 400kHz: 90m

• Coastal construction
• Harbor Construction
• Environmental Survey

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.

"Because the ground is poor, we have no choice but to use a structural slab." Such fixed notions of "over-design" unnecessarily drive up construction costs. In large space buildings such as warehouses, factories, and stores, the choice of floor slab type is one of the most significant variables affecting construction costs. What is important is to compare and verify the advantages and risks of each type, and to derive the optimal solution that is "suitable for the purpose" for the entire building. By reading this content, you will understand the following points: - Characteristics of the five main construction methods with different support forms - Recommended situations for adoption - Cost comparison examples of floor slabs "I am struggling with the dilemma of floor settlement risks and costs on weak ground." "I want to know the optimal solution for the site without being tied to a specific construction method." Construction companies and general contractor representatives facing such issues are encouraged to take a look.

Our company will be exhibiting at the "Hokuriku Technology Exchange Techno Fair 2026." Dates: October 23rd, 10:00 AM - 5:00 PM October 24th, 10:00 AM - 4:00 PM Venue: Fukui Prefectural Industrial Hall We look forward to your visit.