For areas troubled by water issues such as leaks and condensation! Here is information about reusable absorbent mats.

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

Measures against flooding damage caused by typhoons and heavy rain! Uses superabsorbent polymer *Video explanation available.

● It is a water-absorbing, inflatable, bag-shaped simple dam. ● Recommended for flood prevention measures against heavy rain and typhoons. ● Before absorbing water, it is lightweight and easy to handle, and can be stored compactly. It won't be a nuisance even if kept on hand. ● When in use, fill the container with about 20 liters of water for each Pig Water Bag, and knead it by hand while allowing it to absorb water. It will inflate in about 5 minutes. ● The Pig Water Bags can be stacked up to three layers. ● If unopened, the shelf life is approximately 5 years. *Currently, we are offering a document summarizing recent trends in flood damage.

• Disaster prevention supplies

The most common workplace accident in the country is slipping and falling! The causes vary, including dust and liquids. Solve the problem with Plastex Lok, which is resistant to both dust and liquids!

In 2020, the most common type of injury accident reported by the Ministry of Health, Labour and Welfare was falls. Approximately 30,000 workers are affected each year, which translates to about 86 injured or deceased individuals per day. Plastex Lok features countless protrusions processed to be slip-resistant on the surface, helping to prevent falls for workers. Additionally, its high drainage performance and interlocking tile mat design allow for easy installation and flexible layout changes. ■ Recommended sites - Areas where large amounts of liquids or dust spill - Workstations, assembly lines, laboratories, engine manufacturing, thin plate processing

• Other commercial buildings and service facilities
• Reinforcement and repair materials
• Paving Materials

A mat that helps prevent slipping and falling by absorbing dirt from shoe soles and moisture from snow and rain. The back is coated with a water-resistant adhesive, so the mat won't slip!

Features of the "Piggrippy Floor Mat" ■ Liquid-proof Issue: Risk of slipping and falling due to liquid on the floor Solution: The liquid on the mat is securely retained inside the mat! ■ No tape required for fixation Issue: It's troublesome to secure the mat with tape to prevent it from shifting Solution: The back of the mat is made of adhesive material. It can be fixed without tape! ■ Minimal adhesive residue on the back, allowing for reapplication Issue: It's difficult to remove adhesive residue from the floor when tape is used Solution: The back of the mat uses low-residue adhesive material. It can be reapplied! ■ Washable mat due to non-water-soluble adhesive Issue: The mat peels off when cleaning the floor while it's laid down Solution: The back of the mat uses water-resistant adhesive material. The mat won't peel off even if water splashes during floor cleaning! ■ Easy installation with separately sold installation board and safety cutter Convenient installation board for cutting the mat to your preferred size and a safety cutter designed to prevent cutting accidents are also available for purchase. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• Safety and consumables
• Rain protection items

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/

Starting from October 2025, Panasonic's indoor units for office and store air conditioners will be renewed! In this renewal, all models will come standard with "100 times nanoe X." This not only enhances comfort with commercial air conditioning but also contributes to improving air quality. Additionally, improvements in installation efficiency to enhance on-site work productivity and a strengthened lineup to accommodate diverse spaces have been implemented. The new indoor units are equipped with high concentrations of nanoe X as standard! They demonstrate a high effectiveness in purifying indoor air during air conditioner operation, providing a safer and more comfortable environment for office and store users and employees. Furthermore, the center of the suction inlet and the center of the hanging bolt have been unified. This allows for the combined use of canvas ducts and panels, improving installation efficiency. If you have any questions or would like a quote, please feel free to contact us. We will fully support you in replacing your commercial air conditioning!

We will be exhibiting at the "Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025," which will be held for two days starting from November 19 at Gran Messe Kumamoto (Masaki Town, Kamimashiki District, Kumamoto Prefecture). This exhibition is organized by the organizing committee of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025, aiming to enhance disaster prevention awareness through the introduction of advanced technologies and products related to disaster prevention, as well as to promote economic and technological exchanges. On the day of the event, we will showcase our "High Water Content Soil Improvement Agent MT Series" and "Soil Recycling Technology Bontelan Method," and we will introduce our technologies through practical demonstrations using actual soil. We invite those nearby to stop by our booth. Venue: Gran Messe Kumamoto (1010 Fukutomi, Masaki Town, Kamimashiki District, Kumamoto Prefecture, 861-2235) Date and Time: November 19 (Wednesday) 10:00 AM - 5:00 PM November 20 (Thursday) 9:30 AM - 3:30 PM Our Booth Location: B10 Presentation: November 20 (Thursday) 10:45 AM - 11:15 AM, Seminar Room 4 Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025 HP https://www.s-kumamoto.jp/