Joe Prince has been certified as an Higashi-Osaka brand!

The installation method is simply to attach it with the included screws!

Inspection door, gas chamber, and trunk room wire stopper for inspection openings that is very popular for installation. There are three features! ● Easy installation. Just attach with screws! Since the clamp and wire are pre-assembled, installation can be done easily. It only takes two steps: attach the door-side fixing bracket to the door and the frame-side fixing bracket to the frame using the included screws. ● Easy angle adjustment. Just pull the wire! Adjusting the opening angle of the door is simple; just decide on the desired angle and pull the wire. Additionally, if you want to increase the angle, you can adjust the wire length by simply pressing the protruding part of the clamp. ● Mitigates impact when the door is opened By installing shock-absorbing rubber between the frame fixing bracket and the wire with a ball stop, it mitigates the impact when the door is opened. It can be installed on either side of the door without regard to left or right orientation, so there is no need to specify left or right. Furthermore, it can be installed on both standard frames and sash frames without optional parts, making it cost-effective. A wire stopper for inspection openings with excellent workability. Please give it a try.

• Steel Door

Anyone can use it easily! Just break the passcode and turn the knob to lock it.

While delivery boxes are rapidly becoming popular, troubles related to their operation methods are also increasing. Our dial lock for delivery boxes, the "L-353," allows you to complete the locking process simply by grabbing and turning the main unit, thus resolving issues such as "the operation method is complicated and unclear" and "incorrect notification of the passcode." The "L-353" is a dial lock that simplifies the operational steps for delivery personnel to reduce troubles. The recipient sets a passcode to unlock the box and keeps the door closed while the passcode is in a scrambled state. Unlike regular dial locks, which become inoperable when the numbers are scrambled, the "L-353" can still be operated even when the numbers are scrambled, and locking occurs when the main unit is turned. Delivery personnel can simply place the package inside and turn the main unit to complete the locking process, eliminating the need for passcode setup or notification. Additionally, when the recipient scrambles the passcode, the "0 Stop Function" allows them to easily align it back to "000," preventing the scrambled numbers from being guessed.

• Delivery lockers

【Popular Product】A partition clamp with a fixed part that rotates 360°. It can be used even if the edge of the table is round or has an angled shape!

Introducing the product "PT-180 Panel Clamp," born from Joe Prince's contemplation of what can be done during the COVID-19 pandemic. Acrylic partitions have become commonplace in stores and offices, but issues such as "not being able to install them where intended" have arisen. This product solves those concerns. The main feature of this panel clamp is that the part that holds the panel can rotate! It can rotate 360°, allowing for easy adjustment of the installation angle to vertical, parallel, or diagonal. Additionally, installation is very simple and requires no tools. Installation is completed in two steps: Step 1 "Clamp onto the tabletop," and Step 2 "Clamp the panel." Anyone can install it, and it can also be easily removed if no longer needed. 【Features】 ■ Installation angle is fully adjustable! The part that holds the panel rotates 360 degrees. ■ Available in two types to match the shape of tabletops and other surfaces. ■ Two colors: White and Black.

• Fences, screens, and partitions

What is visible from the front of the door is only the handle insertion hole. It creates a smart space where nothing is attached.

Wouldn't it be nice to have a simple door without any protrusions...? Have you ever thought that? With Joe Prince's clearance lock, that dream can come true! ★POINT★ ● The door surface features a simple design with nothing attached. ● The only visible part from the front of the door is the handle insertion hole. ● It is a "one-action lock type" that automatically locks just by closing the door. ● To prevent being locked in, it has an emergency unlocking function that can be accessed from the back. ● It is compatible for use on both left and right sides. ● It can be installed on flush doors, meeting doors, and standard doors. If you want to know more, please contact us using the inquiry form below♪ ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Steel Door

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/