【Newsletter Now Available!】Applying Luxury Car Noise Reduction Technology to Building Materials!

【Sample available!】Just stick it on Galvalume steel sheets. The industry's thinnest class at 0.55mm for roof rain noise reduction.

【Features】 ■Industry's thinnest!! A tape with a thickness of 0.55mm solves rain noise issues. ■Reduces indoor and outdoor rain noise by 10dB. ■Only requires 30% coverage relative to the width of the roofing material. ■Adheres firmly without hardening even in winter conditions. ■Easily cut with scissors or a cutter. For more details, please check the link to the Iida Sangyo website below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - View videos measuring rain noise at a rainfall rate of 100mm/h. - View installation videos. - Free download of technical materials (effects when applying drainage hardware, performance comparison with insulation boards, durability, etc.) Past adoption examples: - Insulation boards stored outdoors became wet and unusable due to rain. With this product, indoor storage is possible without taking up much space. - Soundproof sheets were too heavy and difficult to install, so I wanted something easier to work with. - Now I can propose a combination of Galvalume roofing and vibration control tape to clients concerned about rain noise.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

【Sample Giveaway!】Make walls thinner. Easily install by simply sticking it onto gypsum boards to combat noise! Lighter than soundproof sheets, reducing the burden on workers!

Iida's unique vibration-damping soundproofing technology, which does not rely on traditional soundproofing methods of "thick and heavy," creates a quiet and comfortable living space. Easily implement noise control by simply sticking and sandwiching it onto gypsum board! It is lighter than soundproof sheets, reducing the burden on workers. Iida Sangyo's vibration-damping material 'Zetro NV-αII' is a 0.5mm thick wall vibration-damping tape that "converts vibrations into heat to achieve soundproofing." By simply sticking it between double layers of gypsum board, the TLD-45 wall is upgraded to TLD-50. It improves the coincidence phenomenon around 2kHz by 5dB. 【Features】 - Easy installation by simply sticking and sandwiching onto gypsum board - Adhesive tape requires no glue - Reduces installation time by approximately 70% compared to soundproof sheets - Lighter than soundproof sheets, reducing the burden on workers *For more details, please refer to the PDF document or feel free to contact us.

• Soundproofing Sheet

[Sample available now!] Make walls thinner. Simple installation by just sticking and sandwiching it with gypsum board for noise reduction! Lightweight, which also reduces the burden on workers.

Iida's unique vibration-damping soundproofing technology, which does not rely on traditional "thick and heavy" soundproofing methods, creates a quiet and comfortable living space. Easily tackle noise issues with simple installation by just sticking and sandwiching it onto gypsum boards! Its lightweight design also helps reduce the burden on workers. Iida Sangyo's vibration-damping material, 'Zetro NV-αII', is a 0.5mm thick wall vibration-damping tape that "converts vibrations into heat to block sound." By simply sticking it between double layers of gypsum board, the TLD-45 wall is upgraded to TLD-50. It improves the coincidence phenomenon around 2kHz by 5dB. 【Features】 ■ Easy installation by just sticking and sandwiching onto gypsum boards ■ Adhesive tape eliminates the need for glue ■ Reduces installation time by approximately 70% compared to our previous methods ■ Lightweight design reduces the burden on workers *For more details, please refer to the PDF document or feel free to contact us.

• Soundproofing Sheet

To follow the "movement" of the flooring, no lifting, cracking, or buckling! No need for underlayment or carpentry! An adhesive that is easy to apply, has good disassembly properties, and is user-friendly for workers!

Product Name: IB Bond 【Features】 ✓ Elastic adhesion prevents cracking and lifting ✓ No need for plywood or calking ✓ Easy to apply even in cold weather ✓ Can absorb unevenness with a dedicated notched trowel ✓ Excellent dismantling properties, ideal for floor replacement Unlike conventional adhesives (urethane-based adhesives) that rigidly fix the movement of flooring materials, IB Bond "follows the movement" of the flooring, alleviating the stress that causes warping and lifting. IB Bond is a modified silicone-based adhesive with a solvent-free formulation. There is no solvent odor typically associated with conventional adhesives. It remains soft even in cold weather, allowing for quicker and easier application. * This reduces the burden on workers and can cut dismantling time by about 50% compared to conventional adhesives. * Please refer to the "Dismantling Comparison Video with Conventional Products" on our website.

• Other flooring materials

[Sample Available] Just lay it out; a one-piece unit that doesn't require any adhesive! Equivalent to LL-45 sound insulation and the same thermal insulation as high-performance glass wool insulation 48K!

Product Name: Chardan OY430 [Features] ✔ No need for underlayment; low height of 43mm! ✔ Integrated soundproofing and insulation unit ✔ Easy installation by simply laying it down; installation time approximately 3 hours for 50m² (according to our research) ✔ High impact absorption performance equivalent to tatami mats This is a floor soundproofing material that can be laid under flooring with a thickness of 43mm. Being a bottom layer, it fits well under window frames! Due to its structure filled with special sound-absorbing material, it provides both soundproofing performance and insulation effect simultaneously. OY430 Thermal conductivity: 0.040 [W/(m·K)] OY430HS Thermal conductivity: 0.033 [W/(m·K)] * OY430HS is a high insulation version of OY430. Its composition and basic performance (thickness/soundproofing/constructability/safety) are equivalent to OY430. Using our uniquely designed "OY Joint," we achieved innovative construction that reduces labor and noise during installation. It features high impact absorption similar to tatami mats, ensuring safety during falls. It is also recommended for use in facilities for the elderly and kindergartens.

• Renovation and repair methods

[Sample available!] Just by sticking it to the underside of a metal roof, you can reduce rain noise. With about 30% coverage relative to the roof width, the effect is outstanding!

Product Name: Zetoro NV-αII 【Features】 ✓ Just apply 30% of the width of the roofing material! ✓ Reduces indoor and outdoor rain noise by 10dB ✓ Industry’s thinnest! Despite being only 0.55mm thick, it effectively addresses rain noise ✓ Can be applied without hardening even in winter conditions ✓ Easily cut with scissors or a cutter Metal roofs excel in durability, aesthetics, and ease of installation, but their soundproofing performance is insufficient. The vibration-damping tape solves rain noise issues. The vibration-damping tape applied to the metal roof converts the vibrational energy from falling raindrops into thermal energy, thereby suppressing the generation of rain noise. The roofs of residences with the tape applied reduce noise not only indoors but also outdoors. Zetoro NV-αII, which reduces rain noise by applying just 30% of the width of the roofing material, can be used in cover methods during new construction or renovation.

• Renovation and repair methods

【Sample Giveaway!】Concentrating unique technology into units, providing overwhelming construction efficiency and a comfortable living space.

Shardan supports comfortable living in collective housing such as condominiums and apartments from the floor up, thanks to its excellent soundproofing and thermal insulation properties. It accommodates a wide range of flooring materials, including solid wood flooring and SPC flooring, and mitigates impact noise transmitted from upper floors to lower floors. **Features of Shardan** ☆ Integrated soundproofing and insulation unit With a low floor thickness of 40mm, it can secure a space that is "more than 100mm higher than the standard ceiling height." Soundproofing: Industry-first! Achieves floor sound insulation performance of "LL-45" with a thickness of only 40mm, obtaining ΔLL(II)-3S. Thermal insulation: Uses sound-absorbing insulation material that demonstrates thermal conductivity equivalent to "high-performance glass wool insulation 48K." Ease of installation: Compared to dry double flooring, it "reduces installation time to less than 1/3," with simple laying using specially designed fastening components. Safety: Provides "high shock absorption" equivalent to tatami mats, improving safety during falls. **Shardan Lineup** ◯ SPF400 / SPF400HS A multi-type that does not limit finishing materials. *SPF400HS is a high thermal insulation version of SPF400.* ◯ OY430 / OY430HS A low-construction type that does not require a subfloor. *OY430HS is a high thermal insulation version of OY430.*

• Double Floor System

[Sample Presentation] Easy installation with soundproofing performance equivalent to LL-45 and insulation performance comparable to high-performance glass wool insulation 48K! 40mm thick low-floor base material.

Product Name: Chardan SPF400 【Features】 ✔ Low height of 40mm! ✔ Integrated soundproofing and insulation unit ✔ Reduced construction time to less than 1/3 compared to dry double flooring! (In-house research) ✔ Achieved LL-45 with SPC flooring! A multi-type that does not limit the choice of top material This is a floor soundproofing material laid under flooring with a thickness of 40mm. It has been certified for performance with SPC flooring, which is said to be thin and hard, making it difficult to ensure soundproofing performance. With Chardan SPF400, SPC flooring can be used not only in commercial facilities but also in apartment buildings and welfare facilities where soundproofing and insulation functionality is required. Since it is a form that fills the underfloor space with special sound-absorbing material, it provides both soundproofing performance and insulation effect simultaneously. SPF400 Thermal conductivity: 0.040 [W/(m·K)] SPF400HS Thermal conductivity: 0.033 [W/(m·K)] * SPF400HS is a high insulation version of SPF400. The composition and basic performance (thickness/soundproofing/constructability/safety) are equivalent to SPF400. By using dedicated edge treatment materials and fastening components, we achieve innovative construction that reduces construction time and noise.

• Tile/Indoor

【Sample Giveaway!】Just 0.5mm. Simply sandwich it between gypsum boards to elevate the soundproofing performance of your walls by one level.

【Features】 - With a thickness of 0.5mm, there is no significant design change required. - Improves the coincidence phenomenon around 2kHz by 5dB. - Lighter than soundproof sheets, reducing work burden. - Installation time can be reduced by 70% compared to soundproof sheets. The wall vibration control tape utilizes Iida's unique "vibration control soundproofing technology" that does not rely on thickness or weight. It is mainly adopted in apartment buildings. For more details, please check the Iida Industry website at the link below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - A series of installation videos showing how to apply it to gypsum boards. - The mechanism of vibration control soundproofing and soundproofing performance regarding partition walls. - Auditory confirmation of the effects on partition walls. For more details on vibration control soundproofing technology, please check the website below. https://kenzai-orotex.jp/technology/wallfloor.php The browsing items on the website include: - The mechanism of vibration control soundproofing. - Experimental videos confirming the effects of vibration control soundproofing, etc. If you are having trouble with the sound environment in your home, please consult Iida Industry.

• Soundproofing Sheet

[Sample Available] A one-piece unit that only needs to be laid out and does not require disposal! Equivalent sound insulation to LL-45 and insulation performance comparable to high-performance glass wool insulation 48K!

Product Name: Chardan OY430 【Features】 ✔ No need for disposal; low height of 43mm! ✔ Integrated soundproofing and insulation unit ✔ Easy installation by simply laying it down; installation time is approximately 3 hours for 50m² (according to our own research) ✔ High impact absorption performance equivalent to tatami mats This is a floor soundproofing material that can be laid under flooring with a thickness of 43mm. Being a bottom layer, it fits well under window frames! Since it fills the underfloor space with a special sound-absorbing material, it provides both soundproofing and insulation effects simultaneously. OY430 Thermal Conductivity: 0.040 [W/(m·K)] OY430HS Thermal Conductivity: 0.033 [W/(m·K)] * OY430HS is a high insulation version of OY430. The composition and basic performance (thickness / soundproofing / workability / safety) are equivalent to OY430. Using our uniquely designed "OY Joint," we achieved innovative construction that reduces labor and noise during installation. It features high impact absorption similar to tatami mats, ensuring high safety during falls. It is also recommended for use in facilities for the elderly and kindergartens.

• Renovation and repair methods

[Sample Available!] Direct floor soundproofing substrate with the performance of "L-45"

**Features** - 43mm low floor height ensures sufficient ceiling height - Low floor height allows for good fitting under window frames - Reliable floor sound insulation performance (L-45 certified by a third-party organization) - Easy installation with no need for a base layer, just lay it down - High shock absorption comparable to tatami (approximately G50) Please consider for hotels, condominiums, and apartments. For more details, please check the link to the Iida Sangyo website below. You can request and confirm the following items on the website: - Request for samples - Free download of product CAD data - Viewing of actual installation videos (installation time: approximately 3 hours for 50m²) Adoption examples * Photos of examples can be viewed on the Iida Sangyo website. - A yoga studio wants to open in a commercial building, but sound insulation is necessary due to a tutoring school below. → Ensured sound insulation while maintaining a ceiling height with a low floor of 43mm. No complaints from below. - A request was made to renovate from tatami/straight-laid cushion flooring to hardwood flooring. → Achieved the same floor height of 55mm as tatami, accommodating barrier-free access by applying it to the original cushion flooring area.

• Soundproofing panels

[Sample available!] Just by sticking it to the underside of a metal roof, you can reduce rain noise. With about 30% coverage relative to the roof width, the effect is outstanding!

Product Name: Zetoro NV-αII 【Features】 ✓ Just apply 30% of the width of the roofing material! ✓ Reduces indoor and outdoor rain noise by 10dB ✓ Industry’s thinnest! Despite being only 0.55mm thick, it effectively addresses rain noise ✓ Can be applied without hardening even in winter conditions ✓ Easily cut with scissors or a cutter Metal roofs excel in durability, aesthetics, and ease of installation, but their soundproofing performance is insufficient. The vibration-damping tape solves rain noise issues. The vibration-damping tape applied to the metal roof converts the vibrational energy from falling raindrops into thermal energy, suppressing the generation of rain noise. The roofs with the applied vibration-damping tape reduce noise not only indoors but also outdoors. Zetoro NV-αII, which reduces rain noise by applying just 30% of the width of the roofing material, can be used in cover methods during new construction or renovation.

• Renovation and repair methods

Introducing butyl tape in sizes not available in the market! A presentation of waterproof tape.

We have turned vibration-damping butyl rubber used in automobiles into waterproof tape. This is possible because we handle hundreds of different sizes of automotive parts! We can propose options tailored to your desired size! ◇Examples of Use◇ Waterproofing for roofing in single-family homes Waterproofing for balcony saddle areas Waterproofing during solar panel installation Waterproofing for seams in waterproof sheets If you are interested, please feel free to contact us!

• Waterproof tape, adhesive, drain, protective panel

Seven types of fire-resistant materials developed in-house!

○Heat-expanding refractory material "Bantect" Available in all forms from molded products made of rubber and resin to paste-like products! Expands at approximately 200°C or higher during the initial stages of a fire! The material expands at the temperature of initial combustion in a fire, blocking the space that would allow flames to spread. Designed with halogen-free formulations to comply with environmental regulations. We can provide product recommendations based on the situation. Please feel free to consult with us.

• Special Construction Method

Materials expand at temperatures above 220℃, blocking flames and heat transfer! Suppresses scattering after combustion.

The "Bantect Series" is a thermally expandable fireproof material that expands at temperatures above 220°C, blocking the transmission of flames and heat, and suppressing the scattering after combustion due to the effects of flame retardant additives. We also offer other products such as "Bantect MG (vulcanized rubber type)" which can be vulcanized and molded at 170°C (for 7 minutes or more), and "Bantect MJ (injection molded type)" which features high flexibility and durability. 【Features (partial)】 ■ Bantect Series - Material expands at temperatures above 220°C, blocking the transmission of flames and heat - Suppresses scattering after combustion due to the effects of flame retardant additives - Suitable products can be selected based on the application and construction method ■ Bantect MG (vulcanized rubber type) - Can be vulcanized and molded at 170°C (for 7 minutes or more) - Allows for the design of products with three-dimensional shapes through mold forming *For more details, please refer to the PDF document or feel free to contact us.

• others

Prevention of floor cracking and lifting: No need for waste plywood or calp.

【Features】 ■ Can be directly applied to slab substrates ■ Elastic adhesive eliminates the need for backer board on flooring ■ Moderate elasticity follows the expansion and contraction of flooring, preventing cracking and lifting ■ Easy to apply even in cold weather ■ Solvent-free type that is environmentally friendly ■ Superior dismantling properties compared to traditional rigid polyurethane adhesives, making it ideal for floor replacement For more details, please check the Iida Sangyo website. https://kenzai-orotex.jp/product/ibbond.php You can confirm the following items on the website: - Comparison of construction methods and compositions using traditional rigid types and elastic adhesives. - Videos showing that the notched trowel can be used to hold and adjust unevenness. - Results demonstrating flooring lifting tested in our own laboratory. - Installation videos are available (installation time: approximately 3 square meters, 2 minutes and 38 seconds). - Videos comparing dismantling properties with rigid adhesives (approximately 50% reduction). - Product catalogs and installation manuals are available for free download, so please make use of them.

• glue

The "Wallet Key," which brings a major innovation to the hotel key situation that has undergone several generations of changes, including cylinder locks, magnetic locks, contactless card locks, and mobile keys, has finally been born. Full-scale implementation will begin within the year at domestic accommodations. This service directly delivers the Wallet Key to the wallet apps pre-installed on guests' smartphones. We will provide an overview and the latest information on hotel keys from the perspectives of business efficiency, energy conservation, and hotel digital transformation (DX).

The Aica Modern Architecture Seminar Executive Committee will invite architect Junya Ishigami as a lecturer and hold the "67th Aica Modern Architecture Seminar." The "Aica Modern Architecture Seminar" is a cultural activity aimed at enhancing and developing architectural culture, welcoming renowned architects from both Japan and abroad to give lectures across a wide range of fields, including housing, environment, and urban space. This seminar, which began in 1983, will mark its 67th session, and the details of the event are as follows. We sincerely look forward to your attendance. Organizer and others: ■ Organizer: Aica Modern Architecture Seminar Executive Committee ■ Sponsor: Aica Kogyo Co., Ltd. ■ Operational Support: Kenpo Co., Ltd. ■ Inquiries: Aica Modern Architecture Seminar Executive Committee Office (within Kenpo Co., Ltd.) aicaseminar@kenchiku.co.jp

NR-Power Lab Co., Ltd. will exhibit at CEATEC 2025, which will be held at Makuhari Messe from Tuesday, October 14, 2025, to Friday, October 17, 2025. We will be jointly exhibiting with our investors, NGK Insulators and Ricoh. Our company is contributing to the market expansion of the Energy Resource Aggregation Business (ERAB) through the development of energy resource IoT systems, while also working on the development of diverse service businesses. The services we are currently developing are mainly two: the "GX Data Utilization Service," which creates environmental value, and the "Virtual Power Plant Service (VPP)," which generates power "adjustment capability" by automatically controlling batteries and other devices using AI. At our booth, we will introduce specific demonstration cases of these services. We look forward to your visit.

The Eco Housing Project, a residential franchise strong in attracting customers, is hosting a cost-performance housing tour by Harbor House, the number one builder in terms of new custom home starts in Niigata Prefecture for three consecutive years from 2021 to 2023. - A cost-performance housing tour that attracts customers with low costs and high quality amidst rising prices. - An internal tour that provides hints for increasing negotiation and contract rates. - A customer attraction method that links the website with the completed housing tour. - Introduction of success stories from franchise members, etc. We look forward to the participation of construction company presidents who are seriously considering increasing customer attraction and contract rates. ◇ Detailed information and application https://x.gd/pUe2b ◇ Phone inquiries TEL: 025-383-8881 《Eco Housing Project》 This residential franchise leverages stable customer attraction as its strength, offering a wide range of building products and total solutions down to cost reduction. It is the optimal franchise system for construction companies with fewer than 30 houses per year, providing tools and know-how to expand to 60 houses. With a membership fee of 0 yen, costs are provided through a monthly subscription, allowing access to various services without initial investment.

The Eco Housing Project is a residential franchise that excels in attracting customers. A website will be launched in the month following membership, and full-scale customer acquisition will begin. Even construction companies with low brand recognition can reliably acquire new customers through effective marketing tailored to the local area. Additionally, we offer 21 types of building products based on customer needs, including housing facilities, performance, lifestyle, and taste, and our all-inclusive pricing strategy connects with customer visits and contracts. The Eco Housing Project leverages the know-how and tools of Harbor House, which achieved the number one ranking in the number of custom home starts in Niigata Prefecture in its 17 years of operation. Our strength lies in providing total solutions from customer acquisition to contracts and even cost reduction. We adopt a subscription model with no initial investment, requiring only a monthly royalty, allowing access to a variety of services. To survive the competitive landscape of construction companies in 5 or 10 years, proactive measures are essential. We invite construction company owners considering strengthening their customer acquisition and product capabilities to participate in our information session. ◇ For more details and applications https://x.gd/pUe2b ◇ Phone inquiries TEL: 025-383-8881