Added an 800nm short pass filter to the expert coating.

It is an optical filter that selectively transmits light below a specific wavelength and blocks light of longer wavelengths.

The short pass filter can selectively transmit light below a certain wavelength while blocking light of longer wavelengths. This allows for effective handling of light in specific wavelength bands. (Do you have any of the following concerns?) ■ Is it customizable due to its high wavelength dependence? ■ Does performance decrease when light is incident at an angle, and can it be controlled? ■ Is there a possibility of reduced transmittance when blocking specific wavelengths? ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Security cameras and surveillance systems
• Halogen bulbs
• Automated guided vehicles (AGV, RGV)

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As a coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• Other lighting fixtures
• Showcase

It is an optical filter that cuts ultraviolet and infrared light while having a high transmittance in the visible light range.

A UV-IR cut filter is a filter that cuts light in the ultraviolet and infrared regions while having a high transmission rate in the visible light region. In other words, it is an optical filter that simultaneously realizes the properties of both a UV cut filter and an IR cut filter. By placing it in front of CMOS sensors or CCD sensors, it serves multiple roles, such as cutting out noise-inducing light, providing heat protection for various light sources, and preventing degradation of LCD components due to ultraviolet light. It is an excellent optical filter and optical thin film with multiple functions. Are you facing any of these issues? - Is it possible to cut both ultraviolet and near-infrared light? - Can a filter be made that allows visible light to pass while blocking IR and UV wavelengths? - I want to reduce noise light and increase the sensitivity of the sensor. Can I consult with you? - Is it possible to custom adjust the wavelength range that I want to transmit? - Is processing to chip size possible?

• Home Security
• lamp
• Mobile phones and smartphones

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Do you have such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking the wavelengths of IR. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Security cameras and surveillance systems
• Halogen bulbs
• Automated guided vehicles (AGV, RGV)

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Seven Corporation has begun research and development related to rust prevention, aiming to expand the functionality of the natural multifunctional aqueous solution "SEA'S 7." This research is being promoted as a collaborative study with the Industrial Technology Research Institute. In recent years, the manufacturing industry has been seeking technologies that balance environmental impact reduction and improved work safety, making rust prevention measures after cleaning a critical issue. This research includes corrosion evaluation using metal test pieces, measurement of weight changes, and durability tests in a circulating water environment, advancing the understanding of rust prevention mechanisms and performance evaluation. In the future, we aim to develop a next-generation SEA'S 7 that incorporates rust prevention functionality in addition to cleaning, disinfection, and deodorization, contributing to the efficiency of manufacturing processes and the reduction of environmental impact.

We are pleased to announce the launch of the "Vertical Aluminum Step Type F." The "Vertical Aluminum Step Type F" is a new type of aluminum ladder specifically designed for excavation sites, based on the existing "Vertical Aluminum Step." The vertical aluminum step is lightweight due to its aluminum construction, making it easy to transport and set up. Additionally, its modular design allows for flexible height combinations (with connecting parts of 0.7m, 1.0m, and 2.0m). The newly launched Type F retains the features of the previous model while providing even greater convenience. <Features of Type F> ■ The hook adjustment range of the fixed part has been expanded. It can be attached to structures ranging from 20mm to 200mm. ■ The length of the stand pipe can be adjusted. The stand pipe can be stored, making transportation and storage easier. <Release Date> January 5, 2026 <Specifications> - Standard set for Type F: 2.4m *Individual sales of the hanging fixed part and connecting parts are available. *Sales of the previous model (stand pipe fixed type) will also continue.

This time, we will explain the differences in roles between the "accounting system" and the "document management system," which are surprisingly not well known, as well as points that are often overlooked in legal compliance. ■ The difference between accounting systems and document management systems is their "scope of coverage." - Accounting System = Management of "money (numbers)" - Document Management System = Management of "evidence (documents)" ■ Documents that are often overlooked in accounting systems The accounting system primarily focuses on "accounting processes." - "Estimates" where no money movement occurs - "Delivery notes" and "purchase orders," which are intermediate points in transactions ⇒ There are cases where these are not saved or managed in the accounting system. This could be considered a deficiency under the Electronic Bookkeeping Act. ■ Supplementing the missing parts with an "independent system" While there are high-function ERP (Enterprise Resource Planning) systems that can manage everything from estimates to invoicing seamlessly, the reality is that the cost can be a significant barrier to implementation. Therefore, there is also the option of managing documents with an independent document management system like paperlogic. Paperlogic is currently offering a free trial. Please feel free to contact us.