"March 21, 2024 (Thursday) 'Southern Ibaraki Prefecture' Earthquake" MJ@lert Distribution Record

A device that receives, displays, and outputs audio for emergency earthquake alerts distributed by service providers. It can redistribute earthquake alerts to up to four locations via a network.

This device is a dedicated machine that incorporates a backup battery for power outage measures (optional) and can operate continuously for 24 hours. ■ Receives emergency earthquake alerts from the Japan Meteorological Agency and displays the estimated seismic intensity at a pre-set location and the time until the primary wave (S-wave) arrives. ■ The upper server supports IPV6 and can register up to two locations. ■ Configurable for constant connection of both systems or priority switch-over connection for one system. ■ Logs the information received from the Japan Meteorological Agency and the results of estimated calculations based on that information. ■ Automatic time calibration via NTP client software. ■ Email distribution function allows sending estimated results and various error information to up to six addresses. *For more details, please contact us.

• Other measuring instruments

By knowing about an earthquake a few seconds earlier, it is possible to ensure safety and control equipment.

"Mobile Alert" is an emergency earthquake information distribution service that allows you to receive alerts faster than your mobile phone, providing estimated seismic intensity and time until impact based on your address. This emergency earthquake alert system has been involved in the industry since the demonstration phase by the Japan Meteorological Agency, and it has a wealth of construction experience across various industries. 【Features】 ■ Proposals tailored to budget and industry ■ Extensive track record of integration with numerous device control systems ■ Reliable distribution using a robust data center ■ Comprehensive provision from dedicated lines to terminals ■ 24/7 operator support during emergencies ■ Integration with elevators, broadcasting equipment, and manufacturing devices ■ Emergency shutdown of hazardous areas such as production lines and gas facilities through earthquake alert integration *For more details, please download the PDF or feel free to contact us.

• Other Software
• others

[Free Admission] Crisis Management Industry Exhibition (10/5 to 10/7) Exhibition! Emergency stop of elevators before the shaking of an earthquake.

JFE Com Service Co., Ltd. will exhibit our products at the "Crisis Management Industry Exhibition 2022" held at Tokyo Big Sight from October 5 (Wednesday). This is a chance to see the actual equipment up close! ● Exhibition Dates: October 5-7, 2022 ● Scheduled Exhibits: Emergency Earthquake Early Warning Reception Devices, CO2 Monitors 'Mobile Alert' is an emergency earthquake information distribution service that can receive alerts faster than mobile phones and provides estimated seismic intensity and lead time based on the customer's address. The mechanism of this emergency earthquake early warning has been involved in the industry's participation since the Japan Meteorological Agency's demonstration experiment phase, and we have a wealth of construction achievements across many industries. 【Features】 ■ Proposals tailored to budget and industry ■ Extensive track record of integration with numerous device control systems ■ Reliable distribution using robust data centers ■ Comprehensive provision from dedicated lines to terminals ■ 24/7 operator support in emergencies ■ Integration with elevators, broadcasting equipment, and manufacturing devices ■ Emergency stops for hazardous areas such as production lines and gas facilities through integration with emergency earthquake alerts *For more details, please download the PDF or feel free to contact us.

• Other Software

[Free Admission] Crisis Management Industry Exhibition (10/5 to 10/7) Participation! Automatic broadcasting of earthquake arrival times and predicted seismic intensity from broadcasting equipment before the shaking of an earthquake.

JFE Com Service Co., Ltd. will exhibit our products at the "Crisis Management Industry Exhibition 2022" held at Tokyo Big Sight from October 5 (Wednesday). This is a chance to see the actual equipment up close! ● Exhibition Dates: October 5-7, 2022 ● Scheduled Exhibits: Emergency Earthquake Alert Reception Terminal, CO2 Monitor 'Mobile Alert' is an emergency earthquake information distribution service that can receive alerts faster than mobile phones and provides estimated seismic intensity and lead time based on the customer's address. Our emergency earthquake alert system has been involved in the industry since the Japan Meteorological Agency's demonstration experiment phase, and we have a wealth of construction experience across many industries. 【Features】 ■ Proposals tailored to budget and industry ■ Extensive track record of integration with numerous device control systems ■ Reliable distribution using robust data centers ■ Comprehensive provision from dedicated lines to terminals ■ 24/7 operator support in emergencies ■ Integration with elevators, broadcasting equipment, and manufacturing devices ■ Emergency stop of hazardous areas such as production lines and gas facilities through emergency earthquake alert integration *For more details, please download the PDF or feel free to contact us.

• Other Software

Just by knowing the differences, the importance of earthquake preparedness becomes immediately clear.

Television and mobile phones provide services for general users (alerts). Our company's emergency earthquake notification service is a service for businesses (forecasts). Let me briefly explain the difference between alerts and forecasts. 【Alert】Our product 【Forecast】Television and mobile phones - Can be delivered for seismic intensity of 3 or higher → Delivered from seismic intensity of 5 lower - Provides area information pinpointed to the customer's address, including estimated seismic intensity and lead time → Estimated seismic intensity and lead time not provided - Reliable delivery via dedicated lines → May not be deliverable depending on the local radio environment If you would like to know more about our products, please feel free to contact us.

• Earthquake-resistant construction method

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Metal components such as outdoor lighting and road signs must possess the quality to function safely over a long period in harsh environments like rain, wind, and ultraviolet rays. The foundation of high quality consists of three key elements: 1. Precision design, advanced processing technology, and appropriate material selection 2. Strict process management and skilled workers 3. A quality control system equipped with inspection systems, measurement technology, and traceability. In cutting, dimensional accuracy and smooth cutting surfaces are particularly important; in bending, angle accuracy and uniformity of shape are crucial; and in welding, joint strength and beautiful beads are essential. By organically linking these aspects, metal products that combine durability and reliability are created. For more detailed explanations, visit the Kando Industrial website! You can find the continuation through the related links.

We will introduce the latest solutions that comprehensively support everything from daily business improvements to the establishment of systems in emergencies, centered around the dialysis business support system "Seraph" and the disaster information sharing system "DIEMAS." ■ Dialysis Business Support System "Seraph" Promotes digital transformation (DX) of operations with flexible scalability and intuitive operation tailored to the field. It smartly solves facility-specific issues through multi-manufacturer connectivity and integration with other systems. ■ Disaster Information Sharing System "DIEMAS" A cloud-based platform that supports the continuity of dialysis medical care. It accelerates the visualization of disaster situations and support matching, and was selected for the 2025 "Disaster Prevention Product Catalog." On the day of the event, we will present practical applications tailored to the challenges of your institution through live demonstrations. We sincerely look forward to your attendance. 【Event Overview】 Conference Name: 71st Annual Meeting of the Japanese Society for Dialysis Therapy Date: June 19 (Friday) to June 21 (Sunday), 2026 Venue: Kobe Portopia Hotel / Kobe International Conference Center / Kobe International Exhibition Hall / World Memorial Hall Official URL: https://site.convention.co.jp/71jsdt/