Campaign Sale Part 2 'Exclusive to Online Store' is now underway! The products eligible for this limited-time campaign are battery chargers! Announcement of the 'Online Store Exclusive Campaign Sale - Part 2'.

A compact battery charger suitable for various charging applications.

The "GC Series" is a charger that employs a "two-stage charging" method to achieve high efficiency and extend battery life. The two-stage charging consists of an initial charging phase and a float charging phase. It is used as an embedded unit in chargers and is incorporated into portable power units and UPS systems. 【Features】 ■ Two-stage charging method ■ Wide input voltage: AC90–264V ■ Wide temperature range: -30℃ to +60℃ ■ W testing conducted in Taiwan and Japan ■ Primary and secondary side insulation design ■ Various protective functions included *For more details, please refer to the PDF document or feel free to contact us.

• Batteries and Capacitors
• Other Batteries

The charger applicable to lead-acid batteries and lithium-ion batteries can be programmed according to the battery used. Operating temperature range: -30°C to +70°C.

The "ENC Series" battery charger is a desktop type battery charger that adopts a three-stage charging method. It is a charger applicable to lead-acid batteries (non-sealed, sealed, gel, AGM) and lithium-ion batteries (lithium iron phosphate, ternary lithium-ion batteries, etc.), and it can be programmed according to the type of battery used. Additionally, it has built-in protection circuit functions, ensuring safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts three-stage charging - Can be used in various countries with a wide input voltage range - Programmable charging method (optional item: SBP-001) - Remote ON/OFF control and built-in temperature sensor - Charging voltage can be set according to the type of battery - Over-voltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Maximum efficiency: 90.5% *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Other Batteries

【 NEW 】High-performance battery charger integrated with a power supply.

The NPP series is a 2-in-1 design device that allows the use of both battery charger mode and power supply mode in a single unit. It can be used not only as a battery charger but also as a constant voltage output power supply to drive general loads. The system is not complicated and is a product that can be adopted for many applications. 【Features】 - 2-in-1 design: selectable battery charger mode / power supply mode - Maximum efficiency of 94% - Wide input voltage range AC90V to AC264V - Thermal control DC fan for noise reduction measures - Selectable charging methods (2-stage charging, 3-stage charging) - Built-in CANbus protocol (for control, settings, and monitoring) - Adjustable charging voltage and current via VR - Operating status signal, battery monitoring signal, remote control, and temperature sensor circuit included - Wide operating temperature range: -30℃ to +70℃ - Equipped with various protection circuits - Certifications obtained: UL / DEKRA / CB / EAC / AS/NZS / CE / UKCA *Currently preparing to obtain PSE certification. Models 1200 and 1700 are not subject to PSE certification. For detailed product information, please visit our website.

• Other power generation

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing type "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, with the outbreak of infectious diseases, there has been a demand for products that cater to "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although automatic doors have been installed, they remain open due to people crossing frequently in busy areas. ☑ Touch switches have been introduced to reduce unnecessary openings and closings, but hygiene is a concern. ☑ Touch switches require regular battery replacements since they are powered. The light beam touch sensor "HA-T401" opens and closes automatic doors without contact, and its compact detection range makes it suitable for narrow passages and busy areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effects with two setting modes that reduce unnecessary openings and closings of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have published a white paper titled "Half a Year of Procrastination vs. Full Operation in 3 Months - Conditions for Companies That Should Use Initial Setup Support," aimed at companies considering the introduction and operation of attendance management systems. This document clearly explains the key points of initial setup that are prone to difficulties during implementation, as well as the differences between handling it in-house and utilizing specialized support. If you want to smoothly launch an attendance management system, please take a look.