Raman UV-curable resin

By using micro-Raman, it is possible to evaluate the crystallinity in a fine range (1μm and above)!

At Aites Co., Ltd., we offer analysis and reliability evaluation services for "crystallinity analysis of resin materials using micro-Raman spectroscopy." By analyzing the spectra obtained from a micro-Raman spectrophotometer, it is possible to determine the crystallinity of resin materials in fine detail based on the differences in the half-width of the peaks. We also have case studies analyzing the changes in crystallinity from the mouth of PET bottles to the bottle body. Please leave the analysis, evaluation, and reliability assessment to us. 【Overview】 ■ Crystallinity analysis of resin materials using Raman spectroscopy - The linewidth of the Raman spectrum changes to reflect crystallinity - It is possible to determine the half-width of the C=O stretching band and crystallinity - Relative crystallinity of PET can be determined *For more details, please refer to the PDF document or feel free to contact us.

• others

Depth-direction measurements using Raman spectroscopy! Material analysis of each layer is possible from the surface of multilayer films.

Our "Micro Raman Spectrophotometer" employs a confocal optical system, allowing for the adjustment of the focal position in the depth direction, similar to a microscope, enabling material analysis of each layer from the surface of multilayer films. Using the confocal function of the micro Raman spectrophotometer, the focus of the Raman laser light can be varied in the depth direction. Additionally, by continuously changing the focal position, it is possible to acquire spectra continuously in the depth direction. 【Features】 ■ Adoption of a confocal optical system ■ Enables material analysis of each layer from the surface of multilayer films ■ Capable of varying the focus of the Raman laser light in the depth direction ■ Allows for continuous acquisition of spectra in the depth direction *For more details, please refer to the PDF document or feel free to contact us.

• others

Analysis of inorganic compounds such as metal oxides is also possible!

The corrosion process of iron involves various compounds depending on the degree of corrosion, and even the same iron oxides and hydroxides exhibit different spectra due to differences in valence and crystal structure. Raman analysis allows for the confirmation of the oxidation state of iron in a micron-scale range. [Analysis Content] ■ Analysis of rust formed on the iron surface - Mixture of FeOOH and Fe2O3 - Mixture of FeOOH, Fe3O4, and Fe2O3 ■ Raman spectra of iron rust components *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Analysis of inorganic compounds such as metal oxides is also possible! We will introduce the analysis of black spots on the surface of copper-clad laminates.

We would like to introduce a case where discoloration on the surface of a copper-clad laminate was analyzed using Raman spectroscopy. Our Raman spectroscopic analysis can analyze not only organic substances but also inorganic compounds such as metal oxides. Please feel free to contact us when needed. [Analysis Details] ■ Analysis of black spots on the surface of the copper-clad laminate - Slight discoloration is observed on the surface - Upon magnification, a condition resembling black stains is seen - A spectrum of CuO was obtained from the discolored area - The nature of the discoloration is believed to be copper oxide formed on the surface of the copper *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Distinguish compounds with similar molecular structures through NMR analysis, elucidating the bonding positions of side chains and substituents, as well as branching structures!

At Aites Co., Ltd., we conduct 1H NMR analysis of phthalate esters. NMR analysis is an effective method for distinguishing compounds with similar molecular structures and elucidating structures such as the bonding positions of side chains and substituents, as well as branching structures. In organic synthesis and polymer synthesis, it is an essential analysis to confirm whether the targeted molecular structure has been obtained. The characteristic effects and efficacy of pharmaceuticals, supplements, food, and fibers are influenced by the positions of substituents in the molecular group and the molecular structure. Our skilled team will provide in-depth organic molecular structure analysis. *For more details, please refer to the PDF document or feel free to contact us.

• Non-destructive testing
• Other services and technologies

Analysis of trace components in materials using thermal desorption GCMS! We perform characterization of various materials.

Aites analyzed photopolymerization initiators in UV-curable resins using GCMS and detected Irgacure 184, a type of photoinitiator (light radical polymerization initiator). There are various structures of photoinitiators, and the wavelength of light they absorb and their reaction mechanisms differ depending on their structure. Such substances cannot be identified through main component analysis like IR, making thermal desorption GCMS analysis effective. Our company conducts characterization of various materials by analyzing and identifying trace components in materials using thermal desorption GCMS. Please feel free to contact us when needed. [Examples of photoinitiators] ■ Light radical polymerization initiators ■ Photoinitiators for positive photoresists ■ Light crosslinking agents for negative photoresists *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

Introducing the results of IR analysis on peripheral materials for LCD displays and raw materials (pellets) such as fibers!

PMMA (acrylic), PET (polyethylene terephthalate), and PC (polycarbonate) are utilized in many applications, taking advantage of their characteristic transparency. They are essential materials for industrial products such as peripheral components of liquid crystal displays, protective films for mobile device screens, headlight covers, optical fibers, and textiles. This document presents the results of IR analysis of these raw materials (pellets). [Contents] ■ Analysis samples: Characteristics of ester/carbonate-based polymers ■ IR spectra (ATR method) ■ Spectral comparison (overlay) ■ Other related analysis services *For more details, please refer to the PDF document or feel free to contact us.

• others
• Other services and technologies

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to the combination of light elements, and their specificity is manifested through structure, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents case studies of analysis and evaluation services for organic materials. [Contents] ■ FT-IR Analysis ■ GC-MS Analysis ■ Molecular Weight Distribution Evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment
• Measurement and Analysis Equipment

The Raman spectrum reflects the functional groups of organic compounds! The curing reaction can be estimated to some extent.

Our company analyzes the spectra of UV-curable resins before and after UV irradiation. We irradiate UV-curable resins (acrylic-based) with ultraviolet light and obtain Raman spectra before and after irradiation. Through the analysis of the Raman spectra, the curing reaction can be estimated to some extent. For a more detailed analysis of the curing mode, analyses such as GCMS are necessary, but our company can provide not only structural estimation but also reaction estimation through spectral analysis. 【Features of Raman Spectral Analysis】 ■ The curing reaction can be estimated to some extent. ■ We can accommodate not only structural estimation but also reaction estimation. *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Recently, Intertek Certification AB, the Swedish subsidiary of Intertek, has been accredited by the Swedish national accreditation body Swedac as a verification body for the EU Carbon Border Adjustment Mechanism (CBAM). According to Swedac's announcement, this is the first CBAM accreditation for a verification body in Sweden. This accreditation covers six sectors: cement, steel, aluminum, fertilizers, hydrogen, and electricity, and Intertek Certification AB will provide third-party verification services for embedded emissions associated with the manufacturing of CBAM-covered products based on the scope of accreditation. CBAM is a system that reflects the carbon price on greenhouse gas emissions associated with the manufacturing of certain products imported into the EU, requiring targeted companies to properly calculate and report their greenhouse gas emissions data and comply with third-party verification. Intertek Certification Co., Ltd. supports CBAM compliance in collaboration with accredited entities and global expert teams as the contact point in Japan. If you have any inquiries regarding third-party verification or related services, please feel free to contact us.

We have introduced Majesta Fragrance to a large host club located in Kabukicho, enhancing the atmosphere with scent throughout the establishment. We support the creation of a welcoming space for customers by providing fragrances that match the luxurious ambiance of the interior. **Benefits of Incorporating Scent in Host Clubs** Creating a Memorable Space Scent is deeply connected to human memory and emotions. By incorporating fragrances that align with the store's atmosphere, we can create an impressive environment that makes customers feel, "I want to come back to this space." Enhancing Luxury and Brand Image From the entrance to the floor, the entire establishment is enhanced with high-quality scents. By paying attention to fragrance as well as interior design and lighting, we highlight the glamour and luxury unique to host clubs. Majesta Fragrance has a proven track record of being implemented in various nightlife businesses, including host clubs, cabarets, lounges, clubs, bars, and girls' bars. Please feel free to consult us, starting with a free trial installation.

On October 23, 2026, Brent crude oil futures closed at \$116.72 per barrel. Considering the situation in the Middle East and transportation risks, we introduce points for reviewing the procurement and costs of cleaning agents in our HP article. It is important to check not only the purchase price of thinners and parts cleaners but also the usage amount, working hours, and waste liquid disposal costs. The article provides guidance on how to evaluate the water-based cleaning agent SEA’S7 as an alternative candidate, as well as the application page for tool and jig cleaning. You can consider switching from processes that can be changed by comparing the impact on materials, cleaning quality, rinsing and drying, and compatibility with subsequent processes. The effectiveness and cost vary depending on usage conditions. Please feel free to consult us about comparative testing. For more details, click here (read the HP article) https://www.7seven7.jp/news/oilreplacement-261025/

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On October 22, 2026 (Thursday), they published a page titled "Does Consumption Behavior Change Due to Influence from Others!? 'Demonstration Effect'." The 'Demonstration Effect' refers to how one's consumption behavior can change due to the influence of others' consumption behavior. The page explains the mechanisms behind this phenomenon, its differences from similar concepts, examples of its application, and precautions to take when utilizing it. (Page Overview: Excerpts) ■ What is the 'Demonstration Effect'? ■ Mechanisms behind the occurrence of the 'Demonstration Effect' ■ Differences between the 'Demonstration Effect' and similar concepts ■ Examples of utilizing the 'Demonstration Effect' ■ Precautions when utilizing the 'Demonstration Effect' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/demonstration-effect-2026-10/