Thank you for visiting the Daido Hunt booth at PV EXPO 2024 Solar Power Exhibition.

This is a solar mounting system for residential use that features an integrated building material design, capable of being installed on highly versatile metal roofs (standing seam) with one of the narrowest separation widths in the industry!

The integrated building material wind and zero spacing method 'DR0' is a mounting frame for solar modules that can be used on highly versatile metal standing seam roofs. Features: ■ The spacing width is among the narrowest in the industry. ■ Can be installed on highly versatile metal standing seam roofs. ■ Can be installed on both new and existing buildings. ■ Variations for eaves that accommodate drop beams. ■ By using a screw-fixing method, panel placement is not affected by the position or spacing of the seams. *For more details, please refer to the PDF document or feel free to contact us at the information below. 【Exhibition Information】 We will be exhibiting at the "PV EXPO - 18th [International] Solar Power Generation Exhibition [Spring] -", held at Tokyo Big Sight from February 28 to March 1. We sincerely look forward to your visit. ■ Booth Number: East Hall 1 E1-38 Solar and Eco Business Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Panels, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Compatible with overlapping folded plate roofs of types 88, 150, and S60! Fewer components and easy installation.

KS Hold Light can be installed on standing seam metal roofs with solar power generation systems. Made of aluminum, it is a lightweight and corrosion-resistant bracket. (JIS C 8955:2017 compliant) 【Features】 ■ Compatible with standing seam types such as Type 88, Type 150, and Type S60. ■ The brackets for securing the modules can be used interchangeably for both end and mid sections. ■ Lightweight and highly corrosion-resistant due to aluminum construction. ■ Secured with a single roof bolt. ■ Compatible with various module thicknesses (H30, 32, 35, 40). ■ Allows for fine adjustments of ±20mm by sliding the upper part of the bracket. *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar & Eco Business Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

In addition to installing the frame on large wave slate roofs, installation on renovation cover roofs is also possible!

This product is a mounting frame for solar panel installation compatible with large wave slate roofs found in factories, warehouses, and station buildings. It allows for the installation of solar panels on a renovation cover roof without removing the existing large wave slate roof. The hat rack fixing hardware uses a fastening method at the top of the corrugated sheet designed with waterproofing in mind (MV method), and the MV reinforcement cover reduces the load burden on part of the slate corrugated sheet. 【Features】 ■ Compatible with large wave slate cover roofs ■ Hat rack fixing hardware ・ Fastening method at the top of the corrugated sheet designed with waterproofing in mind (MV method) ・ MV reinforcement cover reduces the load burden on part of the slate corrugated sheet *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar and Eco Business Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Simple installation by just tightening the side bolts. Made of aluminum, lightweight!

The "HS Hold" allows for the installation of solar power generation systems on corrugated metal roofs and is made of aluminum, making it lightweight and highly corrosion-resistant. (Compliant with JIS C 8955:2017) 【Features】 ■ Compatible with both round and square seams ■ The brackets for securing the modules can be used for both end and intermediate sections. ■ Made of aluminum, lightweight and highly corrosion-resistant. ■ Compatible with various module thicknesses (H30, 32, 35, 40) *For more details, please refer to the PDF materials or feel free to contact us at the information below. Solar & Eco Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

The metal horizontal roofing clamp has been compactly renewed. It can now accommodate one type of conventional roofing material.

The metal horizontal roofing clamp "DY5" is a mounting frame for solar modules that can be used on metal horizontal roofing. By tightening the nuts, the two surfaces of the clamps are drawn together, ensuring a secure and firm fixation to the roofing material. Features: ■ Compatible with one type of conventional roofing material ■ More compact than traditional horizontal clamps ■ Achieves easy and strong fixation through the combination of short tracks and clamps ■ Can be installed without making holes in the roof *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar and Eco Division Contact: https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

The gap between the solar panels is achieved at an industry-leading minimum of 7mm! Safe and easy installation without stepping on the panels.

"Short Track 4" is a specialized fitting for decorative slate roofs that achieves a significant reduction in construction time with a simple component structure. 【Features】 ■ A simple structure that secures modules with the same fitting at both ends and in the middle. ■ Achieves an industry-leading minimum vertical spacing of 7mm between modules (50% reduction compared to our company). ■ A safe construction method that allows installation without placing anything on top of the modules. ■ Dedicated fittings enable vertical connectivity of the modules. *For more details, please refer to the PDF materials or feel free to contact us at the information below. Solar and Eco Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Can be adapted to strong winds and heavy snowfall areas! A simple hybrid method that allows installation without cutting the roofing material.

The "DK1" is a specialized fitting that can be installed on various types of overlapping roof shapes. By integrating the roofing material and the fitting using this product and dedicated screws (DK screws), stable strength is ensured at the support section (PAT.P). It can also be used in areas with strong winds and heavy snowfall, where installation was previously not possible. 【Features】 ■ Can be installed on various types of overlapping roof shapes ■ Easy hybrid method that allows installation without cutting the roofing material ■ Compatible with strong winds and heavy snowfall areas using dedicated mounting fittings and screws ■ Ensures stable strength at the support section (PAT.P) *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar and Eco Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Panels, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries

• Solar power generation equipment
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Fukushima Computer System (FCS) will exhibit at "Cybozu Days Japan 2026," one of the largest events hosted by Cybozu, to be held at Makuhari Messe on November 12 (Thursday) and 13 (Friday), 2026. At the FCS booth, we will introduce case studies and practical know-how centered around "Mojitori," which streamlines input tasks from paper, PDF, and images, and "StockNaut," which supports the utilization of information accumulated in kintone. For those looking to "make on-site operations more efficient" or "expand the use of kintone," we have prepared content that allows you to see actual use cases and specific operational images. Additionally, we have launched a special page summarizing the exhibition content and highlights. Please take a look in advance, and we hope it will be helpful for your visit to our booth on the day of the event. ▶ Special Page https://marketing.fcs.co.jp/lp/CybozuDays2026?k3ad=ipros

Sanphase Electric Co., Ltd. will be exhibiting at the "14th SMART ENERGY WEEK - Smart Energy WEEK [Kansai]" held at Tokyo Big Sight. This exhibition is established in the industry as one of the largest in western Japan, showcasing various technologies such as solar power generation, secondary batteries, and smart grids, attracting experts from around the world. We will be presenting DC brushless canned pumps that can operate at low temperatures down to -80°C and high temperatures up to 250°C. If you are even slightly interested, please come visit our booth.

Cleo Corporation will be exhibiting at "Leisure & Sports Japan 2026," held at Tokyo Big Sight. "Leisure & Outdoor Japan 2026" is a specialized exhibition that gathers the latest products and services from the leisure and outdoor industry. It will showcase products, technologies, and solutions that contribute to the development of new facilities and improvement of services for businesses involved in the operation and development of parks, leisure facilities, theme parks, and outdoor facilities. At our booth, we will introduce products that create play spaces, focusing on water park attractions. We sincerely look forward to your visit. Please note that prior registration on the web is required for your visit. ▼ Please register in advance from here. https://leisure-japan.jp/visitors/

Are you relying on "human eyes" for counting parts? At Tokyo Pack 2026, you can see four types of counting, measuring, and packaging machines in action. - Two-way mirror spectral image processing vision counter: Resolution of 65.5 microns. Can identify overlapping tiny parts. - CCD image processing parts counter VC-200: Compatible with a variety of items such as connectors, electronic parts, rubber, and plastic products. - Mini feeder-type weighing machine: Weighs tea, coffee beans, rice, and powders. - Ultra-compact gas filling automatic packaging machine GX-402: Suitable for flat bags of 10-500g and gusset bags of 100-500g. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.

Counting errors and the effort to confirm quantities of parts are hidden costs in the manufacturing process. At JIMTOF 2026, we will showcase two models of Shoraku Industry's vision counters that count parts using camera image processing and AI. The two-direction mirror spectral image processing vision counter has a resolution of 65.5 microns. By capturing images from two directions, it accurately identifies overlapping small parts such as screws, bolts, and metal components. The CCD-type image processing parts counter VC-200 model, equipped with four feeders and AI self-learning, accommodates a variety of items including connectors, electronic parts, rubber, and plastic products. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.