Tensile test

Testing service for plastic films using a universal testing machine (autograph) in a heated environment!

The "tensile test" measures the load and displacement (elongation) of a material when it is pulled at a constant speed, in order to determine the material's physical and mechanical properties. By pulling the test specimen in a temperature-controlled chamber, it is possible to assess and understand the temperature dependence of these properties. Our company is capable of conducting material property tests under temperature conditions. We can also propose conditions tailored to the materials and properties you wish to measure. Please feel free to consult with us. 【Test Machine Specifications】 ■ Temperature range of the temperature-controlled chamber: -40 to 250℃ ■ Load cell: 50kN, 1kN ■ Load accuracy: ±1% of the load indication value ■ Test speed: 0.0005 to 1000 mm/min ■ Travel distance ・Tensile test section: 1485 mm *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Useful for quality control over the years! Ultra-micro hardness measurement of materials such as metals, polymers, and ceramics.

Our "Ultra-Micro Hardness Measurement for Material Evaluation" allows for the ultra-micro hardness measurement of materials such as metals, polymers, plastics, and ceramics. Additionally, since hardness can be quantified, it is also useful for long-term quality control. The hardness is determined by directly reading the depth of the indentation while applying a load to the indenter. It is also possible to determine characteristic values related to recovery behavior. 【Device Overview】 ■ Test force range: 0.4mN to 1000mN, Accuracy: ±0.02mN ■ Indentation range: 1nm (0.01μm) to 700μm *For more details, please refer to the PDF document or feel free to contact us.

• others

Leave it to us for everything from chemical analysis and physical testing to reliability testing! Introduction to our measurement and evaluation services.

Plastic extrusion/injection molding processing is set according to the heat resistance temperature (melting point Tm) of the raw materials; however, due to the degradation and alteration of the materials, there are cases where molding becomes difficult at the specified setting temperature. By checking the melt flow rate (MFR) of plastic raw materials in pellet or powder form, it is possible to determine whether there are any changes compared to conventional products. We present a case where untreated (no load), temperature and humidity load (constant temperature and humidity test), and UV-irradiated PP (polypropylene) were injected and evaluated at a temperature of 230°C and a load of 5kg, so please take a look at the PDF download. [Evaluation Case] ■PP: Polypropylene ■8585: 85°C 85% × 336 hours ■UV: UV irradiation 253.7nm × 336 hours ■Injection time: 10 minutes (converted from 3 minutes) *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other services and technologies

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to the combination of light elements, and their specificity is manifested through structure, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents case studies of analysis and evaluation services for organic materials. [Contents] ■ FT-IR Analysis ■ GC-MS Analysis ■ Molecular Weight Distribution Evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment
• Measurement and Analysis Equipment

The analysis device also supports the analysis and evaluation of polymers! Information on the configuration and principles of high-temperature SEC equipment is included!

The molecular weight of resins such as plastics is not a single value but is composed of multiple molecular weights. By understanding this molecular weight and its distribution, it leads to a better understanding of the mechanisms and theories related to the properties and degradation of resins. In this document, we will introduce a case study where we measured polypropylene resin (PP) samples with and without ultraviolet (UV) irradiation using a high-temperature GPC device suitable for measuring polyolefin-based materials that are difficult to dissolve in solvents at room temperature, and conducted data analysis. We encourage you to read it. 【Contents】 ■ Configuration and principles of high-temperature SEC ■ Analysis case: Molecular weight measurement of PP subjected to UV irradiation ■ Application examples ■ Specifications and considerations for high-temperature SEC *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.