Ideal for fire prevention in care rooms / New plug-in fire alarm for caregiving use

Early detection of abnormal temperatures associated with residential fires using plug detectors / New product of plug-type fire alarm.

■Features of Plug-Type Fire Alarm 1. Early detection of abnormal temperatures associated with residential fires using a plug sensor (set temperature 80°C). 2. Detection and alarm of abnormal temperatures associated with fires can be done closer to the fire's origin. 3. Early detection of abnormal temperatures associated with fires can help prevent fires before they occur. 4. Can be used and installed under similar environmental conditions as residential outlets (design, construction). 5. Installation or replacement of the plug sensor can be easily done by simply plugging it into the jack with one touch. 6. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (Type 1, 120 seconds). ■Features of Temperature Memory Sensor 1. Combines shape memory alloy with electric wire to create an integrated system that detects temperature by short-circuiting (contact) between the two wire cores when the electric wire softens and the shape memory alloy restores. Set temperature is 80°C. 2. Simple, easy, and accurate with zero standby power consumption due to its switching function, making it an eco-friendly technology. 3. The shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 4. Operation is based on a physical mechanism that requires no power supply, ensuring no malfunctions and allowing for swift, accurate use over many years.

• Other security systems
• Architectural design office

Ideal for fire prevention in care rooms / New plug-type fire alarm for caregiving use

■Features of Plug-Type Fire Alarms for Care Facilities 1. Early detection of abnormal temperatures associated with fires in care rooms can be achieved using plug sensors or plug sensing wires (set temperature 80°C). 2. Detection and alarm for abnormal temperatures associated with fires can be done closer to the fire's origin. 3. Abnormal temperatures associated with fires can be detected early, preventing fires before they occur. 4. Alarms for abnormal temperatures associated with fires and emergency situations can be triggered. 5. Installation and construction (design and installation) can be done under conditions similar to those of residential outlets. 6. Installation or replacement of plug sensors and plug sensing wires can be easily done by plugging into a jack with a single touch. 7. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of Temperature Memory Sensors 1. A shape memory alloy is integrated with a wire, utilizing the softening of the wire and the restoration of the shape memory alloy to create a short circuit (contact) between the two wire cores, thereby sensing temperature and generating a signal. The set temperature is 80°C. 2. It is simple, easy to use, and highly accurate, employing eco-friendly technology with zero standby power through its switching function. 3. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Other security systems
• Architectural design office

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through a physical action that does not require power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with electric wires. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing the temperature and generating a signal. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory and is rust-free, maintaining its state permanently once activated. 10. This product meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 11. It is a non-resettable type that allows confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

The catalog for the fire-resistant laminated wood "Moen Gen" has been updated as of April 2026. Why doesn't it drip? Why is it resistant to efflorescence? What about reducing life cycle costs? What are the installation methods? We have answered these questions from everyone. In addition to use in semi-outdoor eaves and skeleton ceilings, there are steadily increasing examples of adoption in places where the use of other fire-resistant woods is difficult, such as ceilings in bathroom facilities. "Moen Gen" uses a natural, penetrating type of paint, which retains the scent and texture of the wood, and if minor efflorescence occurs, it can be easily treated unlike urethane coatings. Additionally, since it is laminated wood, disadvantages such as shrinkage and warping are reduced, improving the maintenance of the building. We have also obtained ministerial certification with the coating, eliminating the need for on-site painting and reducing the burden. The basic colors are available in a rich variety of 27 colors that enhance the texture of the wood. *Custom color matching is also possible. 【Features】 ■ Numerous adoption records in eaves and skeleton ceilings ■ Improved maintenance of buildings ■ No dripping and strong against efflorescence ■ 27 color variations to choose from ■ Easy-to-use fire-resistant wood certified with paint

Did you know that there are various types of lighting poles tailored to their use and installation location? Here, we will explain mainly three types: "high ceiling floodlights," "streetlights and road lights," and "architectural exterior lighting." High ceiling floodlights: Used in indoor spaces such as sports facilities and warehouses where high ceilings are necessary, they require durability and strong illumination to reach far distances. Streetlights and road lights: Installed on sidewalks and roads to enhance safety. Streetlights are designed for uniform diffusion, while road lights are designed to make lanes and intersections easily recognizable. Architectural exterior lighting: Used for beautifying the appearance of facilities and buildings while also serving as nighttime security, often featuring highly designed types such as tapered poles. It is important to equip lighting poles with the optimal materials, shapes, and weather resistance according to their use and installation location. Kanda Industrial provides lighting poles suited for these purposes. For more detailed explanations, please visit Kanda Industrial's website through the related link.

The benefits of converting outdoor lighting to LED include a significant reduction in power consumption compared to traditional lighting. This contributes to reducing environmental impact and lowering electricity costs, and furthermore, the Ministry of Land, Infrastructure, Transport and Tourism and local governments support the transition to LED through subsidy and grant programs. When switching to LED, it is important to focus not only on the lighting fixtures themselves but also on the supporting lighting poles. If the existing poles are sufficiently durable, it is possible to replace them with LED fixtures at a low cost using conversion adapters. On the other hand, if the poles are aging, it is necessary to update them entirely while considering the landscape and harmony with the surroundings. Factors such as height, tilt, design, weather resistance, and maintenance are crucial in the design phase for new installations. It is recommended that the contractor evaluates the condition of the existing poles while utilizing support programs from the national and local governments to consider the optimal response method. A comprehensive assessment of the quality of light, costs, and maintenance management resulting from the LED conversion will be the key to success. For more detailed explanations, please visit the website of Kando Industry! You can find the continuation through the related links.

Metal cutting is not only about separating materials but is also a crucial process that affects product quality and cost. This article introduces the main methods. 1. Laser cutting: Non-contact, high precision, capable of handling complex shapes and thin to medium-thick plates, achieving smooth cross-sections. 2. Plasma cutting: Can process thick plates at high speeds and is cost-effective, though the cross-section is somewhat rough. 3. Mechanical cutting: Strong in cutting large and extremely thick materials or mass cutting using band saws and shearing. 4. Water jet cutting: Zero thermal impact, suitable for hard materials and precision parts. It emphasizes that the skills of experienced craftsmen who can discern metal properties, fine-tune conditions, and minimize distortion are essential. High-quality cutting directly leads to reduced assembly labor, automation of subsequent processes, reduced defects, and improved reliability, making the selection of a trustworthy contractor key. Kanda Industrial concludes by proposing the optimal cutting methods based on their extensive experience and technology. For more detailed explanations, visit Kanda Industrial's website! You can find the continuation through the related links.

Outdoor lighting poles require a paint that combines aesthetics and durability. There are four important points to consider: 1. **Proper Paint Selection** Polyurethane and epoxy paints, which are excellent in weather resistance and corrosion resistance, are recommended to maintain aesthetics over the long term in outdoor environments. 2. **Importance of Surface Treatment** It is essential to thoroughly remove rust, old paint, and dirt. By preparing the substrate meticulously through sandblasting or chemical treatment, the adhesion and lifespan of the paint are improved. 3. **Management of Construction Environment** Weather conditions such as temperature, humidity, and wind speed affect the drying and curing of the paint. Proper management of these factors and conducting the work in a well-ventilated area can prevent unevenness and deterioration of quality. 4. **Regular Maintenance** Regularly inspect the condition of the paint film, and promptly repair any cracks, peeling, or rust found. This allows for the extension of the pole's lifespan and the maintenance of its appearance. **Summary:** The painting of lighting poles is a systematic process involving "paint selection" → "substrate preparation" → "proper application" → "regular repairs," which balances beauty and durability, preserving the landscape value of public roads and facilities for a long time. For more detailed explanations, visit the website of Kando Industry! You can find more in the related links.