Currently publishing a video introducing case studies on production line and machine vibration processing, as well as yield improvement measures.

Suppressing the effects of external shock vibrations! A vibration isolation table for scientific instruments made possible by the high vibration damping performance of Rusk.

A vibration isolation table using porous cast iron rusk with rubber-like vibration damping properties. The surface of the installation table is damped with the rusk vibration isolation table, enhancing the vibration damping rate and reducing the impact of external vibrations. Data from comparative experiments between a general vibration isolation table and a rusk vibration isolation table, conducted by exciting a 2nd-floor concrete floor with a tapping machine (vibration machine for building tests), is currently available. In an environment where the measurement values of an electronic balance do not stabilize with the general vibration isolation table (values fluctuate due to vibrations), the RASK vibration isolation table stabilizes the values without fluctuation, resulting in measurable experimental outcomes. For more details, please refer to http://www.rask.co.jp/RASK-zyoshindai.html. For technical inquiries, please contact the Suisaku website, and for purchases, you can order through the Suisaku website contact or the As One online shop (https://axel.as-1.co.jp/asone/g/NC4-4564-01/?q=%E9%99%A4%E6%8C%AF%E5%8F%B0).

• Anti-vibration rubber
• Weighing scale

A vibration-damping material that can be fixed in place and does not deform or displace, corresponding to nano vibrations and impact vibrations. It can be inserted and fastened in various locations for use.

A porous cast iron rusk with vibration damping performance comparable to rubber is coated with hard polyurethane resin to adapt to the usage environment. Since it is a sheet material, it can be processed into various flat shapes, and by fixing or sandwiching it near various sources of vibration, such as in machinery and parts vibration isolation, vibration isolation during the fixing of machinery to floors and walls, pipe supports, gaskets, and clean room floor vibration isolation, it can effectively reduce vibrations.

• Earthquake-proof and vibration-damping equipment
• Special Construction Method
• Surveying

Soundproof door that reduces ultra-low frequency and low frequency! Suitable for tunnel blasting construction.

Using vibration reduction technology with porous cast iron RASK, we enhance the vibration control of conventional soundproof doors and significantly improve their sound insulation performance. It is capable of blocking ultra-low frequency sounds. In a nearby residential area, where blasting excavation noise reached around [87 dB] with standard soundproof doors, the introduction of RASK soundproof doors resulted in a reduction to [57 dB]. Since then, there have been about 27 instances of RASK soundproof doors being used in public works, demonstrating their effectiveness when needed.

• Soundproofing/Shielding Unit
• Tunnel Materials

The television program "Ushiwaka Chapter 6 - The Challenges of Skilled Workers Protecting Japan's Infrastructure" will feature Azeas. In addition to terrestrial broadcasting, there will also be an archive distribution on ABEMA TV. Please be sure to watch. ● Broadcast Schedule Nagoya TV (Me-Tele): June 2, 2026 (Tuesday) at 23:10 ABEMA TV: June 4, 2026 (Thursday) at 24:00 (Free, with archive distribution available) Hiroshima Home TV: June 4, 2026 (Thursday) at 24:45 KKB Kagoshima Broadcasting: June 7, 2026 (Sunday) at 17:25 *For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On June 4, 2026, we published a page titled "Do We Set 'Forecasts' Too Optimistically Compared to Reality? The 'Planning Fallacy'." The 'Planning Fallacy' refers to the psychological phenomenon of underestimating the time, costs, and risks involved in carrying out tasks while overestimating the benefits. The page explains examples of its occurrence, the factors that lead to it, and methods to overcome it. (Page Overview: Excerpts) ■ What is the 'Planning Fallacy'? ■ Examples of the 'Planning Fallacy' ■ Why does the 'Planning Fallacy' occur? ■ How to overcome the 'Planning Fallacy'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/planning-fallacy-2026-06/

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa