Added the ND filter (Neutral Density Filter) to the artisan coating.

ND stands for "Neutral Density," which is a filter used to adjust the light transmission rate.

【1】Are you facing any of these issues? ◆ I want to address concerns about flares and ghosts. ◆ Is it possible to adjust the transmission rate with custom settings? ◆ I am looking for a filter for adjusting laser equipment. ◆ The shape is special; can it be shipped as a part? 【2】What is an ND filter? ND stands for "Neutral Density," which is a filter used to adjust the transmission rate of light. It is used to reduce the amount of light entering through the lens. It is an essential optical component for controlling shutter speed and aperture in bright environments when taking photographs with cameras, in order to achieve the appropriate exposure. 【3】Design and customization available for your desired wavelength range At Adachi New Industry, we can design and coat (film) according to your desired wavelength range. The characteristic chart at the beginning shows a transmission rate of 50%, but we can accommodate other transmission rates as well. Please feel free to contact us. Additionally, we will design according to the characteristics of the substrate and your requirements, so please let us know your desired substrate type and wavelength range when you inquire.

• Security Sensor Systems
• Security cameras and surveillance systems

We propose a highly experienced half mirror. It is a functional half mirror that can arbitrarily split light into reflected and transmitted rays.

【1】Are you facing any of these issues? ◆ Can you change the degree of transmittance and reflectance? ◆ Since the appearance changes depending on the angle, can we come up with a solution? ◆ Is it possible to design and film even with dielectrics? ◆ Given that there is a range of incident angles, can we take that into account? ◆ The shape is special, but can it be shipped as a component? 【2】Features of the Adachi New Industry Half Mirror It is a functional half mirror that can arbitrarily split light into reflected and transmitted beams. By forming a multilayer dielectric film, it achieves extremely low absorption and minimal light loss, allowing for high-efficiency light splitting compared to using metallic films. This product has a proven track record of being used in various devices, including FA sensors.

• Security Sensor Systems
• Security cameras and surveillance systems

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As a coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• Other lighting fixtures
• Showcase

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.