Introduction to Cushion Tape for Flexo Printing and Plate Mounting

Uses ultra-thick PE foam base material with a thickness of 1.5mm or more. Cushion tape specifically for fixing flexo printing plates [Tesa 52062 BigFoam LT].

In flexographic printing for soft packaging, cushion tape is essential for securing the plates. Among these, tesa 52062 is particularly designed for thicker substrates (1.5mm = 1,500µm thickness or more). This product can ensure thickness with just one piece, eliminating the need to layer thin cushion tapes, which is expected to improve work efficiency. [Features] - Uses a specially developed adhesive for securing flexo plates - Easy to adjust the positioning of the plates, allowing for easy removal without damaging them - Stable adhesive strength prevents plate lifting and air infiltration - Compatible with both solid printing and halftone printing - The foam substrate has excellent resilience and durability, allowing for quick recovery from misalignment and enabling long-run printing *For more details, please download the PDF or contact us.

• others

For flexographic printing that demands higher quality! Tesa SoftPrint 72420 Fast & Easy X soft printing plate mounting tape.

Tesa Softprint 72420 Fast & Easy (FE) Extra Soft is a foam tape developed for fixing printing plates in flexographic printing, designed to meet the demands of higher quality packaging printing. It supports package designers and printing companies by enabling the beautiful expression of more complex patterns in halftone printing. Thanks to the high-performance adhesive applied in this structure, it reduces the time required for the application of flexographic printing tape and plates, allowing for stable long-run printing. Additionally, it enables quick and clean removal of the printing plates and tape. The Extra Soft (X Soft) substrate is designed to prevent foam breakage and ensures that no adhesive remains when peeled off from the sleeve. This helps to shorten the time required for cleaning the sleeve and preparing for the next job change. Furthermore, it not only improves the printing process but also ensures the most critical aspects for the printing industry: print quality and reproducibility. *For more details, please download the catalog.

• others

Easier and more reliable attachment and detachment of flexo printing plates. A new product featuring groove-shaped recesses that allow air bubbles to escape from the adhesive layer on the plate side has arrived! (500µm category)

Flexographic Printing Plate Fixing Cushion Tape [Double-Sided Adhesive Tape] A new product focusing on the plate attachment and detachment process has been launched. It features a groove-like indentation (microchannel structure) in the adhesive layer on the plate side. This design allows for the escape of air bubbles that may get trapped during the application process. It is a new design that is expected to improve the efficiency of plate alignment work. You can choose from four different hardness levels for the foam (the last digit of the product number will differ). *For more details, please download the catalog or contact us.*

• Subsidiary materials

Achieve same-speed splicing and improve productivity. Adhesive tape specifically for connecting film and non-woven fabric raw materials【Tesa EasySplice 51910】.

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials with a unique "interlayer delamination" structure. Its main feature is that it prevents the trouble of the raw material surface opening during idle time, and it ensures that the adhesive surface is not exposed after the splicing process. This helps to prevent mechanical issues caused by adhesive tape getting caught in printing and laminating machines. As the name "Easy Splice" suggests, it is simple and easy to use—just apply one type of tape in a horizontal line. By using Easy Splice, you can reduce splicing failures and waste. Additionally, it allows for reliable splicing without reducing running speed, contributing to increased productivity. We can suggest options from our lineup based on your requirements, such as the type of raw material and running speed. *For more details, please download the PDF or contact us.*

• Safety and consumables

Achieve same-speed splicing and improve productivity. Adhesive tape specifically for connecting film and non-woven fabric raw materials [Tesa EasySplice 51918].

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials with a unique "interlayer delamination" structure. Its main feature is that it prevents the trouble of the raw material surface opening during idle time, and it ensures that the adhesive surface does not become exposed after the splicing process. This helps to prevent mechanical issues caused by adhesive tape getting caught in printing and laminating machines. As the name "Easy Splice" suggests, it is simple and easy to use; you just need to apply one type of tape horizontally. By using Easy Splice, you can reduce splicing failures and waste. Additionally, it allows for reliable splicing without reducing running speed, contributing to increased productivity. We can recommend options from our lineup based on your requirements, such as the type of raw material and running speed. *For more details, please download the PDF or contact us.*

• others

Achieving same-speed splicing of difficult-to-attach films, contributing to increased productivity! Special adhesive tape for raw material splicing [Tesa EasySplice 51948].

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials, featuring a unique "interlayer delamination" structure. It prevents the trouble of the raw material opening during idle time, and after splicing, it does not expose the adhesive surface, allowing for smooth operation of printing and laminating machines. True to its name "Easy Splice," it is simple and easy to use. You only need to apply one type of tape horizontally, making preparation for splicing straightforward. It reduces the risk of splicing failures and wear, enabling the connection of raw materials without slowing down the operating speed, thus contributing to increased productivity. We can suggest options from our lineup tailored to your requirements, such as the type of raw material and operating speed. *For more details, please download the PDF or contact us.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

As the new year begins, I would like to extend my heartfelt congratulations on your continued prosperity. I sincerely appreciate your exceptional support throughout the year. This is the STJ Group (Santec Telecom Japan, STJ Rentec). Now, I am pleased to announce that we will be opening our "Transceiver & Smartphone Rental Shop" simultaneously at three locations nationwide on January 26 (Monday)! ■ List of Services to be Offered - Same-day pickup/return of rental equipment - Usage explanations and demonstrations of rental equipment - Wireless solution consultation desk - Mobile BPO service counter As a special promotion to celebrate the opening of the rental shop, we are currently running a special price campaign for rental equipment pickup at the shop! For more details, please contact us!

This is the Agricultural Division of Sumitomo Forestry Greenery Co., Ltd. In our division, we manufacture and sell potting soil for agricultural, horticultural, and greening purposes. In the future, we would like to regularly introduce our products through the Nōsan Girl Letter.

We would like to inform you about our participation in the IT Trend EXPO 2026 Spring. 《Exhibition Information》 With the concept of "New encounters will change the way we work tomorrow," one of the largest online exhibitions in the industry will be held. NTT TechnoCross will be exhibiting in the Human Resources Comprehensive category. We have prepared numerous discussions and sessions featuring special guests who are active on television, allowing even those who are usually busy to efficiently gather information on products and services related to IT and DX. Additionally, the first 10,000 participants will receive a 500 yen Amazon gift card. Please be sure to register early. 《Exhibition Overview》 March 3 (Tuesday) to March 7 (Saturday), 2026, online (free: pre-registration required) 《Participation Registration》 https://it.expo.it-trend.jp/key/opl7kgdj *Please register (free) by clicking "Receive Ticket / Proceed to Participation Registration" at the above URL.