The Sonic Corporation's homepage has been significantly renewed.

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet featuring case studies that solve post-cleaning issues across various industries!

In response to popular demand, we are publishing "Continuation! Must-Read Before Selection! 'Air Knife Trivia'! It can dry with up to 1/4 the electricity compared to blowing with a compressor! There is always a cleaning process for parts (such as components) and products (like PET bottles and retort packs). After that process, there is always a drying process. I have heard that this drying is an eternal theme. Shall we finally conclude this eternal theme? Sonic's blowers and air knives efficiently and economically solve problems with high air volume and high-speed air! ▼ A job that required 0.4MPa of pressure can be achieved with just 29kPa! ▼ Comparing the air volume of a compressor and a Sonic blower, to achieve an air volume of 7m³/min, a compressor requires 62.5 horsepower. In contrast, a Sonic blower can achieve this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers! "Air Knife Trivia" includes numerous case studies for problem-solving. 【Featured Case Studies】 ■ Automotive industry case studies ■ Food/Beverage industry case studies ■ Pharmaceutical industry case studies ■ Steel industry case studies, etc.

• Conveyor

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Comprehensive catalog available.

The Sonic Corporation's "Blower & Air Knife" is a device that dramatically improves the efficiency of part drying, food processing drying, and blowing away water droplets. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! While achieving a 75% reduction in energy compared to compressed air, the water removal efficiency exceeds 95%, resulting in significant energy savings. 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that far exceed those of compressors * A comprehensive catalog is available for download. * Demo units are also available for loan! Please apply through the "Contact" section. Note: There is a limited number of demo units, so please apply early!

• Conveyor

Sonic's blowers and air knives use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blowers! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, and food processing, as well as the blowing off of water droplets from cans, bottles, and PET bottles? ------ Such issues can be efficiently and economically resolved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower from a compressor, whereas the Sonic Blower achieves this with only 4 horsepower. The difference is significant when compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates a large volume of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at approximately 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples for testing, we will conduct tests at our company.

• others

A product that suppresses water splashing generated during the inspection, printing, labeling, and water draining/drying of filled PET bottles, cans, bottles, and pouches before packaging.

The Sonic SMART Tunnel (Sonic Modular Air Tunnel) can be used in extensive water drainage drying systems. It is a turnkey product that dries PET bottles, cans, and bottles before inspection, printing, labeling, or packaging, with a processing capacity of 100 to 1500 CPM. Adaptability: The Sonic SMART Tunnel is a modular system. Due to its bolt-tight design, it can be easily expanded if changes in product size or additional air knife configurations are needed due to increased production line demands.

• others

Tilt the two air knives slightly and present a blowing method that focuses on the torso and upper part.

The air knife's gap or slot can be adjusted in length to allow for a wider gap. This means that the air knife concentrated on the body can maintain a standard gap while separately adjusting the knife's gap at the top and bottom to hit the handle and the lower ring. This method not only ensures that the air effectively hits the body of the canister but also reduces the required power consumption. SONIC has also suggested further cost reductions by using ABS piping instead of plated steel pipes to lower prices. [Content] [Issues] ○ Yankee Gas faced the problem of propane gas canisters not being sufficiently dry before going to the painting process while changing their solvent-based painting system. ○ Proper drying of the canisters is essential for effective painting. ○ The drying method they were using involved compressed air, which was ineffective and did not adequately remove moisture for painting. ○ High humidity means that no matter how much compressed air is applied, moisture remains on the canisters. For more details, please contact us or download the catalog.

• Conveyor

There was no need for additional construction, and it fit into the existing production line.

Sonic Corporation decided to operate the Sonic150 with 25 horsepower and two air knives, and to circulate air to raise the temperature coming from the air knives. The concept behind Sonic Corporation's revolutionary VT (patent pending) design is to utilize the pressure heat from the blower by partially circulating air. The exit temperature from the air knife will be approximately 45°C to 50°C. This method does not require an external thermal system. The air knife is installed about 10mm away from the bottle, allowing the bottle to pass through at a wind speed of approximately 9,300m/min. The high-speed air and heated exit temperature melt the ice and turn the remaining moisture into mist. As a result, the bottles can be completely dried. [Content] [Issues] ○ Moisture and cold air leave water droplets on the glass, resulting in the reformation of droplets before labeling. ○ Labels cannot be applied until the bottles are dried. ○ The injection and labeling of bottles can only occur after the empty bottles are stacked in a warmed warehouse and heated. For more details, please contact us or download the catalog.

• others

I have made it possible to repeatedly position the air knife.

We proposed 12 Sonic 70 blowers with 7.5 horsepower motors, enclosures, Sonic HEPA filters, and two custom 13" Sonic XE air knives. The performance of the air knives delivered at the beginning of this system perfectly matched the blow level requested by the customer. The results of the impurity contamination tests also confirmed that Sonic's HEPA filters maintained the requested 0.3μ. Additionally, to operate most effectively while keeping the noise level below 80dB, the angle and distance of the air knives are very important, so we manufactured custom Sonic air knives that fit the existing air knife enclosures, allowing for repeated positioning of the air knives. [Content] [Issues] - Compressed air with HEPA filters - The factory was using more compressed air for automatic devices on the production line and other equipment on a daily basis - Due to the increased demand for compressed air, there was a need to add another air compressor to avoid pressure drops For more details, please contact us or download the catalog.

• Conveyor

It has been proven to be the most cost-effective solution.

Sonic Corporation proposed a method to install a rotating air knife (patented) from above and a standard air knife from the side, angled from top to bottom. Due to the low production speed and the complex shape of the engine block, the rotating air knife has proven to be suitable. The rotating air knife can achieve a rotational speed of 200 rpm. By rotating the air knife and then blowing, it can deliver multiple high-impact blows to the surface of the parts with a single air knife. In cases of such complex shapes, attempting to achieve the same drying with other methods would require the installation of six air knives. This technology has proven to reduce horsepower and provide the most cost-effective solution while utilizing limited space. [Content] [Issues] - The surface of the engine block has many complex irregularities, and if water remains in these areas, it can ultimately lead to defective products. - The factory has found existing drying methods to be inefficient and is seeking an urgent solution. For more details, please contact us or download the catalog.

• Conveyor

Non-contact water removal and drying of wire cables using Sonic Corporation's blower and air knife.

We would like to introduce a successful application of the Sonic SP Dryer cable drying machine. A manufacturer of low-voltage wires and cables, as well as bare aluminum and copper wires, needed to install a spark tester before the final packaging process. This meant that the wire running at 3000 feet per minute (900 m/min) had to be completely dried before the spark test. Due to the rapid increase in line speed, traditional methods became costly and inefficient. If the cable is not completely dried, the inspection machine may misidentify it as defective. Because of the high-speed production at 3000 feet per minute (900 m/min), Sonic recommended the SP dryer. This is a drying device housed in a box that features air knife technology (XE 42” long) with a centrifugal blower (Sonic 150, 20 horsepower) to achieve energy savings. For more details, please contact us or refer to the catalog.

• others

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at a speed of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has demonstrated exceptional drying effectiveness when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot may occur after passing through the cleaning brush. ○ Residual shot material sticks to large electromagnetic surfaces, making transportation hazardous. For more details, please contact us or download the catalog.

• others

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Conveyor

A specialized blower for draining/drying that uses a small motor to rotate at high speed and generate a large airflow!

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Sonic Corporation's 'Blower & Air Knife' is a device that dramatically improves the efficiency of part drying, food processing drying, and water droplet removal. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! It achieves a 75% reduction in energy consumption compared to compressor air, while maintaining a water removal efficiency of over 95%, resulting in significant energy savings. ≪Sonic Corporation Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Thanks to proprietary technology, it generates a large airflow with energy efficiency compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. The structure is also easy to maintain.

• Conveyor

"Sonic" water drainage drying is Sonic! We are introducing success stories and photos. [Simplified version]

This is a collection of case studies on Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also include photographs. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them out at your factory! Alternatively, you can conduct simple tests at our company! Please consider this!

• others

Blow away water, dust, and dirt from parts with high-speed air for quick drying. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than that of compressors or domestic blowers. Additionally, another major feature of the Sonic air knife system is its economical nature, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if a hose is needed.

• Conveyor

Seeing is believing! Improve drying and reduce running costs by using high-speed air knives to remove water from air discharged by high-volume blowers!

Is there any problem with the Sonic food processing drying process and the blowing off of water droplets from cans/bottles? After sterilization and filling, it is also used for draining water before printing expiration dates on PET bottle caps, cans, retort packs, and for drying transport boxes. It is utilized in various industries, not only in the food sector but also for drying water from automotive parts, steel plates and pipes, and semiconductor components. The Sonic Air Knife System's high air volume and high-speed air efficiently and economically solve these problems! For those who have not been able to resolve these issues until now... we have numerous case studies for problem-solving! ***Videos will be updated regularly*** [Case Studies] - Examples for the food/beverage industry - Examples for the automotive industry - Examples for the pharmaceutical industry - Examples for the steel industry, etc. For more details, please contact us or download the catalog.

• container

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.

"Because the ground is poor, we have no choice but to use a structural slab." Such fixed notions of "over-design" unnecessarily drive up construction costs. In large space buildings such as warehouses, factories, and stores, the choice of floor slab type is one of the most significant variables affecting construction costs. What is important is to compare and verify the advantages and risks of each type, and to derive the optimal solution that is "suitable for the purpose" for the entire building. By reading this content, you will understand the following points: - Characteristics of the five main construction methods with different support forms - Recommended situations for adoption - Cost comparison examples of floor slabs "I am struggling with the dilemma of floor settlement risks and costs on weak ground." "I want to know the optimal solution for the site without being tied to a specific construction method." Construction companies and general contractor representatives facing such issues are encouraged to take a look.

Our company will be exhibiting at the "Hokuriku Technology Exchange Techno Fair 2026." Dates: October 23rd, 10:00 AM - 5:00 PM October 24th, 10:00 AM - 4:00 PM Venue: Fukui Prefectural Industrial Hall We look forward to your visit.