【Product Introduction】A comprehensive introduction to our handled products.

With an IP66 waterproof rating, it can be installed 50 meters away from the main unit! Even in the event of extreme weather, it can be addressed simply by replacing the power supply.

Our original 'ZF series' is a power-separated LED floodlight. By using a separated power supply, it can be installed up to 50 meters away from the main unit. It can be installed in locations protected from sunlight (ultraviolet rays), rain, and saltwater. 【Features】 ■ Highest quality made in Japan Achieved with high specifications at a low cost ■ Salt-resistant specifications allow use in salt-damaged areas - Aluminum: 6063 aluminum alloy + salt-resistant coating - Stainless steel: 6063 aluminum alloy + salt-resistant coating / Arm and hinge made of SUS316 stainless steel (Note: The salt-resistant coating is applied with a 100-micron polyester resin powder coating throughout) ■ Standard lightning surge protection of 20kV Prepared for recent abnormal weather conditions ■ IP66 waterproof and dustproof Usable both indoors and outdoors (Note: The power supply part is IP67) ■ PSE certified with a 5-year warranty confidence (Note: There may be exclusions even within the warranty period. Please refer to the catalog for details.) * For more details, please request a catalog or view the PDF data available for download.

• Floodlight

Waterproof standard IP66 specification that does not affect ship radio communication.

The Honest Original "V Series" is an LED floodlight that can be used on ships. It is also effective in various locations other than ships (please refer to the applications and achievements below). 【Features】 ■ Completely waterproof, with IP66 rating for waterproofing and dustproofing, and has passed salt spray testing. ■ Compliant with PSE Electrical Appliance and Material Safety Law for safe use. ■ Equipped with a temperature protection circuit that automatically turns off the light if the power supply reaches a maximum temperature of 95°C. ■ Strong salt-resistant specifications, made of 6063 aluminum alloy with salt-resistant coating, and the arm and hinge parts are made of SUS316 stainless steel. ■ Standard lightning surge protection of 20kV, limiting current during lightning strikes for protection. ■ Compliant with EMS/EN61000-4-5, providing preparedness for natural disasters. *For more details, please refer to the PDF materials or feel free to contact us.

• Floodlight

With astonishing waterproof and dustproof performance, it can be used in various places for different purposes!

Our original "Field Light-X" is an integrated LED fluorescent light that requires no electrical work. With an IP67 waterproof rating, it can be used outdoors. Additionally, it can be connected, making it highly effective at construction sites. 【Features】 ■ IP67 waterproof and dustproof Usable both indoors and outdoors (Note: The cord part is IP63, so please be cautious when connecting.) ■ Connectable When using 100V, the 40W model can connect up to 15 units for a 100m illumination, and the 20W model can connect up to 25 units for a 145m illumination. (Note: If using 200V, please ensure not to insert 100V products and manage accordingly.) ■ Impact-resistant, made from the highest strength materials Polycarbonate construction that won't break even if stepped on. ■ 3-year warranty As a Japanese manufacturer, we provide reliable support. (Note: There may be cases where certain conditions are excluded even within the warranty period. Please refer to the catalog for details.) *For more information, please request a catalog or download the PDF data.

• Fluorescent Light Type

High brightness yet saves over 70% in power consumption! This is the environmentally friendly fluorescent light!!!

The "LB819 series" is an LED fluorescent light with a built-in power supply and single-sided power supply. ■ Safe Circuit Design - Circuit design that suppresses excessive inrush current during initial lighting - Circuit design that suppresses harmonics - Circuit design with an efficiency rate of over 90% - EMI (electromagnetic interference) suppression circuit design ■ Achieving a 40,000-hour lifespan for LED lamps - Main electrolytic capacitors have achieved test results with a designed lifespan of over 60,000 hours ■ Other Safety Circuits - Overcurrent and overvoltage protection circuits - Safety short-circuit function circuit ■ Electrolytic Capacitors 1. Achieved a test designed lifespan of 65,223 hours (7.447 years) at an operating temperature of 77.8°C 2. Achieved a test designed lifespan of 73,882 hours (8.434 years) at an operating temperature of 80.2°C 3. Achieved a test designed lifespan of 78,908 hours (9.008 years) at an operating temperature of 79.3°C 【Lineup】 3000K / 5000K / 5700K (Note: 4000K is made to order)

• Garden lighting/lights (LED/solar)

Since it is flicker-free, you won't be troubled by noise and can use it in any location.

The ballast-free type is a flicker-free LED. It can be used in various locations such as ships, heavy machinery, studios, and museums. It is our most popular product, having surpassed a total sales record of 13,000 units. *Please note that this product has polarity. 【Features】 ■ Waterproof standard IP65 Can be used indoors and outdoors due to waterproof and dustproof design ■ Flame retardant ■ Major manufacturer The LED chip part uses "Epistar" which has a cross-licensing agreement with the Japanese manufacturer Toyota Gosei ■ Energy-saving measures The power consumption of LEDs is about 1/8 compared to incandescent bulbs *This bulb is compatible with DC (12/24V). Please note that it cannot be used with non-specified power sources (such as household AC (100V)).

• Garden lighting/lights (LED/solar)

Using eco-friendly functional glass, BioGlass!

By simply adding it to the auxiliary tank of the car's radiator, it improves fuel efficiency and reduces harmful exhaust gases. Bioglass weakens the surface tension of the coolant, quickly cools the engine, promotes complete combustion of gasoline, and achieves improved fuel efficiency. 1. Add CAR UP to the auxiliary tank of the radiator. 2. The surface tension of the coolant in contact with the bioglass becomes smaller (weaker). 3. The coolant with reduced surface tension quickly cools the engine. 4. The contact area between the coolant and the engine block increases, enhancing thermal conductivity and cooling effectiveness. Additionally, the friction resistance of the coolant decreases, allowing it to circulate faster and improve cooling efficiency. 5. This allows the engine to be cooled efficiently, enabling more air to enter the cylinders. Following these steps, fuel efficiency increases, and harmful exhaust gases are reduced.

• Car and bicycle parking facilities

We have newly added the "RB Catcher," a log capture device installed on impermeable sediment control dams in flow sections, to our product lineup and have started sales. The RB Catcher is directly attached to the upstream part of the impermeable sediment control dam to enhance log capture functionality. Unlike the conventional straight arrangement, it features a structural layout that creates gaps between units, ensuring that water flow is maintained without causing blockages after capturing logs. This allows for the reliable capture of subsequent logs without overflow, preventing damage downstream. By adding this new log capture device to our lineup, we will flexibly respond to various needs in the field.

We have introduced Majesta Fragrance to a luxury lounge establishment located in the Kitashinchi area of Osaka. This time, we have adopted "Majesta Fragrance" as part of the in-store space branding. The moment you open the door, you are enveloped in a delicate and sophisticated scent, as if wrapped in high-quality silk. The elegant atmosphere reminiscent of a luxury hotel lounge invites customers into an extraordinary world. Majesta Fragrance has been implemented as an invisible scent branding in many establishments and companies. For scent production in the Kansai area, please leave it to Majesta Fragrance. If you are interested in scent production, please feel free to contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.