Stay comfortable while standing during the cold season! Introducing the fatigue-reducing mat 'Crown Zedran Comfort King.'

This is a fatigue-reducing mat made of "Zedran" material, which has three times the elasticity compared to standard foam mats.

The appropriate balance of "softness" and "elasticity" that supports the lower limbs reduces fatigue in the legs and back. This fatigue reduction effect lightens the burden on workers while simultaneously enhancing safety and work efficiency. 【Features】 ■ Fatigue Reduction Effect It alleviates tension in the legs, waist, and back during standing work, providing a comfortable environment that allows for concentration on tasks. ■ Durability It excels in abrasion resistance and slip prevention. Flexibility does not change even in low-temperature environments. ■ Trip Prevention For safety, the edges are sloped. ■ Custom Sales Available Can be cut to your preferred size. ★ Up to 18.3m in length. ■ Cold Weather Countermeasures It mitigates the cold air transmitted from the floor. ■ Flame Retardant Compliance It has passed the flame retardant performance verification tests set by the Japan Flame Retardant Association.

• Other commercial buildings and service facilities

Are you doing standing work in a busy area without wearing safety shoes? We recommend the durable surface 'Crown Zedran Workers Delight'!

The fatigue reduction effect of the U.S. patented "Zedran" foam material, which is born from a perfect balance of "softness" and "elasticity." We have prepared a durable fatigue-reducing mat with a ribbed steel plate that is slip-resistant even in oily environments, while maintaining the fatigue reduction effect of this material. This mat lightens the burden on workers in harsher environments while enhancing safety and work efficiency. 【Features】 ■ Fatigue Reduction Effect It alleviates tension in the legs, hips, and back during standing work, providing a comfortable environment that allows for concentration on tasks. ■ Durability The hard surface is highly durable and maintains flexibility even in low-temperature environments. ■ Slip Prevention The surface has a ribbed steel plate pattern that helps prevent slipping. The surface and Zedran foam base are bonded using special technology, ensuring they do not peel off. ■ Trip Prevention For safety, the edges are sloped. ■ Flame Retardant Compliance It has passed the flame retardant performance verification test established by the Japan Flame Retardant Association.

• Other commercial buildings and service facilities

Less fatigue even during long hours of standing work! Free samples of "Crown Zedran Comfort King/Workers Delight" are available!

Many standing workers experience fatigue and pain in their legs, back, waist, knees, and the soles of their feet. There is a mutual relationship between leg fatigue and overall fatigue in workers. If we can reduce the burden on the legs, we can alleviate fatigue throughout the body. The "Crown Zedran Comfort King" series is a product developed in the United States with the aim of reducing worker fatigue and improving work efficiency and morale. We offer a variety of mats designed to reduce fatigue in different standing work environments, based on a wealth of examples, including products with anti-static features, antibacterial processing, slip-resistant treatments, and enhanced durability. Would you like to make the demanding and uncomfortable standing work a bit more comfortable? You can try the "Crown Zedran Comfort King" series for free for two weeks! *For more details, please contact us or refer to the PDF data.

• Safety and consumables

Heat-resistant, oil-resistant, and insulating materials! Mats effective for reducing fatigue during standing work and improving safety.

The "Floor Mat Comprehensive Catalog" is a catalog that addresses various needs, including mats that enhance safety and mats that reduce fatigue during standing work. Additionally, it includes mats suitable for floor protection, maintenance, vibration and sound insulation, as well as use in bathrooms and pools. There are also products that can accommodate special applications using anti-static materials, insulating materials, and heat-resistant materials, making them suitable for use in research facilities. [Contents] ■ Fatigue-reducing mats ■ Slip-resistant mats ■ Floor protection and maintenance mats ■ Vibration and sound insulation mats ■ Mats for bathrooms and pools *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables
• Safety Supplies

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.