Added a 650nm short pass filter to the artisan coating.

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As a coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• Other lighting fixtures
• Showcase

It is an optical filter that cuts ultraviolet and infrared light while having a high transmittance in the visible light range.

A UV-IR cut filter is a filter that cuts light in the ultraviolet and infrared regions while having a high transmission rate in the visible light region. In other words, it is an optical filter that simultaneously realizes the properties of both a UV cut filter and an IR cut filter. By placing it in front of CMOS sensors or CCD sensors, it serves multiple roles, such as cutting out noise-inducing light, providing heat protection for various light sources, and preventing degradation of LCD components due to ultraviolet light. It is an excellent optical filter and optical thin film with multiple functions. Are you facing any of these issues? - Is it possible to cut both ultraviolet and near-infrared light? - Can a filter be made that allows visible light to pass while blocking IR and UV wavelengths? - I want to reduce noise light and increase the sensitivity of the sensor. Can I consult with you? - Is it possible to custom adjust the wavelength range that I want to transmit? - Is processing to chip size possible?

• Home Security
• lamp
• Mobile phones and smartphones

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Do you have such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking the wavelengths of IR. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Security cameras and surveillance systems
• Halogen bulbs
• Automated guided vehicles (AGV, RGV)

On October 1, 2025, we will release a cloud-managed turbidity meter and pH meter as a new option for the Disaster Prevention System ZEROSAI and Compass PLUS. Features: - Centralized management of turbidity and pH in the cloud along with weather information - Automatic notifications via electronic bulletin boards and business chat* when standard values are exceeded - Observation data can be output in PDF or CSV format *ZEROSAI can automatically notify through the following business chats: LINE WORKS, direct, WowTalk, Microsoft Teams *For more details, please visit our website or feel free to contact us.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

In the northern part of the Kanto Plain, in Utsunomiya City, Tochigi Prefecture, a solar power plant utilizing Grace Solar's CT foundation single-pole ground installation system is operating steadily. Utsunomiya City, one of Japan's important industrial hubs, has extremely high demands for quality and reliability in infrastructure, and this project fully demonstrates the exceptional capabilities of Grace Solar products in addressing complex geological conditions and high standards. The innovative design of the CT single-pole system effectively adapts to the local soil characteristics, ensuring the robustness of the foundation. During construction, the team strictly adhered to Japan's solar installation standards, establishing a solid foundation for the smooth delivery of the project by ensuring the precision of each construction task. This mounting system optimizes structural mechanical design, guaranteeing support strength while significantly reducing the amount of materials used and on-site work, thereby improving construction efficiency. It ensures particularly excellent pressure resistance against common environmental factors in Japan, such as seasonal rainfall, guaranteeing the long-term stability of the solar power plant under various conditions.

Event Period: October 8 (Wed) to October 10 (Fri) 10:00 AM to 5:00 PM (until 4:00 PM on the last day) Venue: Tokyo International Exhibition Center "Tokyo Big Sight" West and South Exhibition Halls, Booth Number: South 3 Hall S-5054 From October 8 (Wed) to October 10 (Fri), Matsuroku will be exhibiting at the "H.C.R. 2025 52nd International Welfare Equipment Exhibition & Forum" held at Tokyo Big Sight's West and South Exhibition Halls. At our booth, you can see a variety of items, including our residential renovation handrails "Free R Rail" and "Straight EZ Rail," as well as welfare equipment "Tayo Rail UPDATE" and "Tayo Rail SOTOE," featuring many new products set to launch this autumn. Additionally, we will have exclusive novelties featuring our official character "Asunyan" that you can only get here! You will have the opportunity to see and touch popular products as well as new items, so please take this chance to visit us. We sincerely look forward to your attendance. ▽ Official website of the International Welfare Equipment Exhibition 2025 https://hcr.or.jp/

We have started selling an electric automatic coin counter that sorts and calculates a large amount of coins at once. Counting coins manually can be time-consuming and prone to errors. By using the electric automatic coin counter, you can simply insert the coins, and it will sort different types of coins automatically. It also calculates the quantity and total amount automatically.