Added an article to the product page for the 【Aluminum Plate Cutting Machine Running Saw URKM Series】!

Significantly reduces cutting time and minimizes work hours. Thick plates can be transported with minimal effort. This contributes to improved work efficiency, labor savings, and cost reduction.

The "URKM Series" is a circular saw cutting machine that precisely cuts aluminum plates. In addition to its powerful performance and efficient dust collection, the cutting conditions minimize cutting heat, reducing overcutting and enhancing machining accuracy. The optimal saw blade for cutting thick aluminum plates has been selected, enabling a reduction in cutting time. Reference cutting speed for A5052 with a thickness of 70mm: F = 2500mm/min. With two cutting modes—single-position cutting (ABS) and single automatic feed (INC)—efficient cutting operations can be performed. Additionally, it features an easy-to-read and simple-to-operate LCD touch panel control system. 【Features】 ■ The box motion (tool retraction after tool descent) allows the clamp to open after the tool descends, reducing the waiting time for the operator. ■ With workpiece floating ball bearings, a 1-ton aluminum plate can be moved freely in 360° with just 30kgf of force. ■ The workpiece is secured with clamps on both sides of the tool, ensuring safe and stable cutting without vibration. ■ The telescopic circular saw cover follows the saw blade, efficiently sucking up chips. ■ The back gauge achieves precise dimensional accuracy with measurements in 0.01mm increments.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)
• Spandrel Aluminum Panel
• Aluminum alloy door

An aluminum plate cutting machine that has improved functionality, focusing on reducing cutting time, enhancing precision, and improving the working environment!

The URKG cutting machine is a cutting device developed from our years of experience in cutting aluminum plates. ■ URKG Series (New Model) - A compact version of the URK series with enhanced functionality. - Maximum thickness expanded to t110mm, improving performance. - Reduced cutting time; 50% shorter than conventional machines using dedicated saw blades. - Cutting width × ruler length: 1000mm × 1000mm. - Adopts a circular saw cover for over 95% chip recovery. - Features a large touch panel for high operability. - Standard equipped with a workpiece lifting device to improve handling of heavy materials. - Optional installation of a unique anti-workpiece pinching blade. - Compatible with material thickness up to t200mm (optional). An auto-positioner (automatic length setting device) can also be connected as an option.

• Steel

Capable of cutting boards up to 200 mm thick. This model has enhanced functionality aimed at improving operability, maintainability, and environmental compatibility, striving for further improvements in work efficiency.

The URKG cutting machine is a cutting machine born from our years of experience in cutting aluminum plates. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200mm, improving performance. - Reduced cutting time. 50% shorter than conventional machines using dedicated saw blades. - Cutting widths available in 1000mm / 2000mm / 3100mm, with three models. - Achieved over 95% chip recovery by adopting a double circular saw cover with a telescopic cover and self-propelled cover. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials. - Unique development of a workpiece clamping prevention blade attachment. An auto-positioner (automatic length setting device) is also available as an optional connection.

• Steel

Significantly reduced cutting time compared to conventional machines. This model has enhanced functionality in terms of operability, maintainability, and environmental considerations, striving for further improvement in work efficiency.

The URK cutting machine is a product born from our years of experience in cutting aluminum plates. ■ URK Series - Maximum thickness: 100 mm - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Equipped with a uniquely developed anti-workpiece pinching blade. - Features a specially developed blade cover, allowing for safe operation without exposing the blade. - The chip scattering prevention cover efficiently collects large amounts of chips with a dust collector, providing a clean environment. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200 mm, improving performance. - Reduced cutting time: 50% shorter than conventional machines with dedicated chip saws. - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Achieved over 95% chip recovery with the optional Pinocchio cover for chip scattering prevention and self-propelled saw blade cover. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials. An auto-positioner (automatic length setting device) is also available as an optional connection.

• Steel

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.